- TextMate - lists.macromates.com

Re: com.macromates.visibleIndex. ._*files

by Greg

Thank you. Now makes sense why they aren’t consistently created. Sometimes I do edit with files on my hard drive and then sync them to the flash card. (I had started to edit on the card to avoid the added step of ensuring syncing). I’ll think about revising my workflow, particularly since others have to look at my flash drive from time to time. I’m still adjusting to working on Windows and some other complications of the project. Greg > > I think the the technical term is "AppleDouble" files. > > https://en.wikipedia.org/wiki/AppleSingle_and_AppleDouble_formats <https://en.wikipedia.org/wiki/AppleSingle_and_AppleDouble_formats> > > They get created anywhere the underlying filesystem doesn't provide resource forks, or extended attributes (which is mostly anything not HFS+). Since TextMate uses those extended attributes to stash some relevant (like the cursor location), this causes them to appear more frequently. > > If you're using git, you should definitely setup a global exclude file with a few of those macOS-specific patterns. See https://www.gitignore.io/ <https://www.gitignore.io/> for some helpful ones. > > Another way would be to edit your project on an HFS+ drive* ? you'll get those pesky .DS_Store anyway, but at least the ._ files shouldn't appear. > * I'm only suspecting you do, since AppleDouble files are unneeded on HFS+. > > Regards, > Etienne Samson > ———— > TextMate is using extended attributes, which were introduced in 10.4 (I think) and which are also stored in doubles on filesystems that don't support them natively. > > -Martin

7 years, 7 months

1
0
0 0

Re: com.macromates.visibleIndex. ._*files

by Greg

Matt Thanks for the response. I never noticed these files before. Are they created by TextMate, because I don’t see them anywhere else. Or are they created when load the thumb drive on the Windows machine? From the linked discussion in another response I gather it’s TextMate storing some other information, but they don’t always seem to be created. Does TextMate need them or use them? I ask because maybe I don’t want to delete them. I see them also using Transmit (an ftp app). Greg > On Sep 24, 2017, at 5:00 AM, textmate-request(a)lists.macromates.com wrote: > > This is not a TextMate question. It's just how Macs work. Those are resource forks, which Windows can't comprehend. See for example https://superuser.com/questions/851373/hide-macs-dot-underscore-files-on-a-… <https://superuser.com/questions/851373/hide-macs-dot-underscore-files-on-a-…> > > m. > >> On Sep 23, 2017, at 9:48 AM, Greg <web(a)web.knobby.ws <mailto:web@web.knobby.ws>> wrote: >> >> Is TextMate adding files with a leading period and underscore in front, for example, ?._styles.css"? >> >> I?m using TextMate for a class that mostly Windows and all these extra files show up when I?m on Windows as well as other apps which show invisible files. This doubles the apparent number of files.

7 years, 7 months

5
4
0 0

com.macromates.visibleIndex

by Greg

Is TextMate adding files with a leading period and underscore in front, for example, “._styles.css"? I’m using TextMate for a class that mostly Windows and all these extra files show up when I’m on Windows as well as other apps which show invisible files. This doubles the apparent number of files. Greg

7 years, 7 months

2
2
0 0

Trim Trailing Space on Save Option

by George Fields

I know that you can rig TextMate 2 to trim trailing space on save by editing the Text -> Converting / Stripping -> Trim... bundle by changing the semantic class (or creating a whole new bundle). It works well, but I was wondering if there are any plans to add this as an option in the preferences (with a checkbox, etc.) for convenience? It's a rather common one to have that's found on most other editors I've seen, and it would be super cool to not have to mess with the bundles for such a basic thing. Kind regards, - g

7 years, 7 months

4
5
0 0

Find All in document lacks checkboxes

by Matt Neuburg

Forgive me if this has been asked before, but when I do a Find All from the Find dialog (as opposed to the Find in Project dialog), why don't I get the same interface as the Find in Project dialog, with checkboxes allowing me to prevent some occurrences from being subject to a Replace All? m. -- matt neuburg, phd = http://www.apeth.net/matt/ pantes anthropoi tou eidenai oregontai phusei Programming iOS 10! http://shop.oreilly.com/product/0636920055235.do iOS 10 Fundamentals! http://shop.oreilly.com/product/0636920055211.do RubyFrontier! http://www.apeth.com/RubyFrontierDocs/default.html

7 years, 7 months

2
2
0 0

plus buttons in git log

by Matt Neuburg

When you do Command-Y and Log, and the commits are listed with plus buttons at their left, are those plus buttons supposed to _do_ something, like show the diff? They don't. m. -- matt neuburg, phd = http://www.apeth.net/matt/ pantes anthropoi tou eidenai oregontai phusei Programming iOS 10! http://shop.oreilly.com/product/0636920055235.do iOS 10 Fundamentals! http://shop.oreilly.com/product/0636920055211.do RubyFrontier! http://www.apeth.com/RubyFrontierDocs/default.html

7 years, 7 months

2
3
0 0

Cutting/uncutting current line

by Spiros Philopoulos

Hi all, This might be a stupid question: Is there a way in TextMate 2 to cut, and then uncut(paste), the current line with 2 keystrokes? I.e, similar to the nano commands ‘Ctrl-k’ and ‘Ctrl-u’? As opposed to: select the current line, cut, then paste. Thanks in advance.

7 years, 7 months

4
3
0 0

Linting functionality for TextMate

by Greg

Promote away. Thank you. > On Sep 18, 2017, at 5:00 AM, textmate-request(a)lists.macromates.com wrote: > > Subject: [TxMt] Linting functionality for TextMate > Message-ID: <D0C4F4EF-1C59-4999-A842-E8646270D387(a)me.com <mailto:D0C4F4EF-1C59-4999-A842-E8646270D387@me.com>> > Content-Type: text/plain; charset=utf-8 > > Apologies for the self-promotion but I thought this may be interesting to some of you. I?ve seen Atom and Sublime Text linting plugins and I was wanting something similar for TextMate so wrote my own plugin: > > https://github.com/MikeMcQuaid/Linter.tmbundle <https://github.com/MikeMcQuaid/Linter.tmbundle> > > Give me a shout if you like this or have feedback. If there?s enough interest I?d like to try and submit this to be an official TextMate plugin in future. > > Thanks! > > Mike McQuaid > http://mikemcquaid.com <http://mikemcquaid.com/>

7 years, 7 months

1
0
0 0

Re: plus buttons in git log

by Marc Wilson

Works here, as they say. -- Marc Wilson msw(a)cox.net On Sun, Sep 17, 2017, at 11:09 AM, George McGinley Smith wrote: > Yes, it's supposed to pop out the changes in the commit. Do you have > customisations in your Git bundle? I also had the same issue and > reverting to the default bundle fixed the issue for me.> > On Sun, 17 Sep 2017 at 19:56 Matt Neuburg <matt(a)tidbits.com> wrote: >> When you do Command-Y and Log, and the commits are listed with plus >> buttons at their left, are those plus buttons supposed to _do_ >> something, like show the diff? They don't.>> >> m. >> >> -- >> matt neuburg, phd = http://www.apeth.net/matt/ >> pantes anthropoi tou eidenai oregontai phusei >> Programming iOS 10! http://shop.oreilly.com/product/0636920055235.do>> iOS 10 Fundamentals! http://shop.oreilly.com/product/0636920055211.do>> RubyFrontier! http://www.apeth.com/RubyFrontierDocs/default.html >> >> >> _______________________________________________ >> textmate mailing list >> textmate(a)lists.macromates.com >> http://lists.macromates.com/listinfo/textmate > > _________________________________________________ > textmate mailing list > textmate(a)lists.macromates.com > http://lists.macromates.com/listinfo/textmate

7 years, 7 months

1
0
0 0

Error with LaTeX Documentation for Package command

by Tim Bates

I'm getting the following error from the LaTeX documentation command: Traceback (most recent call last): File "/Users/tim/Library/Application Support/TextMate/Managed/Bundles/LaTeX.tmbundle/Support/bin/texdoc.py", line 223, in <module> shell=True).strip() File "/System/Library/Frameworks/Python.framework/Versions/2.7/lib/python2.7/subprocess.py", line 573, in check_output raise CalledProcessError(retcode, cmd, output=output) subprocess.CalledProcessError: Command 'texdoc %' returned non-zero exit status 1 The command source code is: #!/usr/bin/env bash [[ -f "${TM_SUPPORT_PATH}/lib/bash_init.sh" ]] && \ . "${TM_SUPPORT_PATH}/lib/bash_init.sh" . "${TM_SUPPORT_PATH}/lib/webpreview.sh" html_header 'Package Documentation' echo '<p><small>Hint: Cursor on package name shows doc for package. Otherwise show package doc browser.</small></p>' texdoc.py My environment is OS high Sierra beta

7 years, 7 months

2
1
0 0

Performance problem with QL plugin on High Sierra

by Jacob Bandes-Storch

Has anyone else tried out the High Sierra beta and experienced performance issues with the Quick Look plugin? When I put a folder full of .h and .m files into Icon view in Finder, Quick Look started taking up 100% CPU. Seems like there must be some infinite loop, but I haven't investigated the root cause yet. Jacob

7 years, 8 months

1
0
0 0

how disable "smart" insertion of matching quotes and parens with fortran bundle

by Bill Paxton

when I type a quote or a left paren when using the fortran bundle, it automatically inserts a matching quote or paren and leaves the cursor between it and the one i typed myself. i can see that some users will love this and find it very useful. if just find it annoying and a nuisance. i notice that this “helpful” behavior is not present in Plain Text, but I’d like to use the fotran bundle, just without the automatic addition of matching quotes and parens. there was nothing obvious in the details of the fortran bundle, so I’m asking for help on how to manage this. thanks bill

7 years, 8 months

2
2
0 0

question regarding stata 15

by Cunningham, Scott

I recently upgraded to State 15 and am using an older Stata bundle that worked with Stata 14. I am trying to understand how to make Textmate 2 run Stata 15 from within the Stata bundle, but am having trouble figuring it out.

7 years, 8 months

4
7
0 0

Force Push for Git bundle

by George McGinley Smith

Hello Just wondering about the likelyhood of getting https://github.com/textmate/git.tmbundle/pull/36 merged? I have been running with local delta updates since creating that PR but have recently run into issues which removing my customisations has fixed, rather than having to go through and re-update the bundle, if we could get this merged that would likely solve 80% of my required changes as it's one of my more frequently used git commands. Thanks, George

7 years, 8 months

1
0
0 0

Add a RuboCop bundle to bundle index

by Stefan Daschek

I think TextMate’s bundle index should include a RuboCop bundle. Disclaimer: I wrote a RuboCop bundle myself, and there are at least three more that I know about: 1) https://github.com/mrdougal/textmate2-rubocop 2) https://github.com/goyox86/rubocop-tmbundle 3) https://github.com/fazibear/Rubocop.tmbundle 4) My bundle: https://github.com/noniq/RuboCop.tmbundle 1) and 2) seem stale (last commit in Nov resp. Dec 2014). 3) and 4) are actively maintained. One of the differences between 3) and 4) is that 3) supports different gutter marks for different severities, while 4) only uses a generic warning mark. On the other hand, 3) seems to only ever work on the current file, while 4) uses the filebrowser selection (if any, similar to the Git bundle for example). In https://github.com/textmate/ruby.tmbundle/pull/99#issuecomment-296400597 ff. there was discussion if the Ruby’s bundle already existing “Validate Syntax” command should be changed / extended to use RuboCop (if present) – this could be an alternative to adding an “official” RuboCop bundle. Happy to hear your opinions! Stefan

7 years, 9 months

1
0
0 0

Find in Folder Globs

by Rob McBroom

Looking at the code, TextMate appears to start with a list taken from “Find in Folder Globs.default”, which doesn’t exist, so it falls back to hard-coded defaults. I find myself adding the same patterns to almost every project so I’d like to change the defaults. Is there a way to set that via `.tm_properties` or do I just have to add a key named “default” to `com.macromates.TextMate.plist` manually? Thanks. -- Rob McBroom http://www.skurfer.com/

7 years, 9 months

3
4
0 0

modifying existing theme

by Nicolae Garleanu

Hi, This week I installed Textmate 2.0 beta, and I am still learning a lot. One of the things I found myself wishing for was the ability to change some features of the themes I found most to my liking. Google got me to pages such as this (https://manual.macromates.com/en/themes <https://manual.macromates.com/en/themes>), referencing "Preferences → Fonts & Colors”, which I can’t find in Textmate; perhaps the manual does not apply to the version I installed? Is there any (GUI-based much preferred) way of building a theme (modifying an existing one) in my installation? If not, should I perhaps uninstall Textmate and install an earlier version? If so, which? Thank you. Nicolae

7 years, 9 months

2
3
0 0

Re: modifying existing theme

by Greg

I know it’s hard to keep old webpages up but it would be helpful if a banner could be put up on the TM 1 pages with a link to TextMate 2 info. The linked page looks “official,” so even more important. I’m far from a power user and am discouraged from exploring TM when I run into these pages without knowing which version they apply to. Near top of page might be something like: “This page is about TextMate version 1. For TextMate 2 documents check <here> For the status TextMate 1 and 2 read< here>.” Probably should be stuck to top of page in case the link puts someone part way down the page. > On Jul 22, 2017, at 6:00 AM, textmate-request(a)lists.macromates.com wrote: > >> (https://manual.macromates.com/en/themes <https://manual.macromates.com/en/themes> <https://manual.macromates.com/en/themes <https://manual.macromates.com/en/themes>>), referencing "Preferences ? Fonts & Colors?, which I can?t find in Textmate; perhaps the manual does not apply to the version I installed? > > That link applies to TextMate 1.

7 years, 9 months

1
0
0 0

4.8.0

by Bernd

Hi there, I upload generally the new versions of lftp with ‘brew'. But it is able to install this morning only the version 4.7.7 (Command in a the terminal of a Mac : 'brew install lftp’ - with link problems but it is easy to fix it) Do you know of this new version is now included in ‘brew' and how I can find it?  Tkx -- Bernd J.

7 years, 10 months

1
0
0 0

HTML output window not scrolling down when output appended

by Stefan Daschek

I recently started to notice that the HTML output window often (not always) no longer automatically scrolls down when new output is appended (eg. from a build task thats running for several seconds). Anyone else noticing this? Stefan

7 years, 10 months

2
2
0 0

tm_query --setting fontName

by じょいすじょん

Hello all, I'm looking to fix up the old TextMate Python Jedi completion bundle. The docstring viewer command returns this error. Setting or variable 'fontName' not found Traceback (most recent call last): File "Docstrings for word", line 10, in <module> completion.show_docstrings() File "/Users/myaccount/Library/Application Support/TextMate/Pristine Copy/Bundles/python-jedi.tmbundle/Support/completion.py", line 132, in show_docstrings font_name = subprocess.check_output([tm_query, '--setting', 'fontName']).rstrip() or "Menlo-Regular" File "/System/Library/Frameworks/Python.framework/Versions/2.7/lib/python2.7/subprocess.py", line 573, in check_output raise CalledProcessError(retcode, cmd, output=output) subprocess.CalledProcessError: Command '['/Applications/TextMate.app/Contents/Resources/tm_query', '--setting', 'fontName']' returned non-zero exit status 69 This is because the CLI command says no such key exists. /Applications/TextMate.app/Contents/Resources/tm_query --setting fontName Setting or variable 'fontName' not found Is there a modern alternative to fontName? Or, even better, a reference for that and other keys? thanks! JJ

7 years, 10 months

2
4
0 0

Vetting and security policies (was: Bundle Management improvements?)

by Claudia Pellegrino

Hi Josh, (I apologize for my replies to be attached to the wrong places in the thread. I have just figured out how to turn off the digest format. Please bear with me until the changes take effect.) > Thanks for pointing this out! I agree that in 2017 we should > be taking security seriously. I'd love to learn though, what > are some good ways to set up vetting and security policies? Off the top of my head: 1. Create an organization on GitHub, and move the repo there. Or maybe get another GitHub organization (TextMate?) to adopt it. This ensures that in the long run, more than one single person has the power to grant or revoke _Owner_ and _Maintainer_ privileges. 2. You have already mentioned a very effective measure: make it a policy to not allow `sha256 :no_check` without good reason. For TextMate bundles, this means in practice: always pin your Cask to a release; in cases where upstream does not issue releases or tags, pin the Cask to the latest commit instead; do not point to nightlies, or to upstream `head`; in case users really want it, create a separate tap for nightlies within the same GitHub organization. 3. On GitHub, enable forced reviews for any commit on the master branch; also, tick the box that says this actually covers anyone’s commits, including the owner’s. Configure the GitHub repo so any single maintainer has veto rights against merging. Make regular audits to ensure these setting are still in place. 4. Have two maintainers at the very least, and grant them the _Maintainer_ privilege to make #3 technically possible. 5. In the `url` stanza, do not allow domains where the maintainer can’t reliably determine who has control over the domain. For example, if the author of `Foomatic.tmbundle` offers their releases only via a Dropbox link, maintainers will not be able to keep track of authenticity as updates get released. 6. Do not be afraid to refuse a Cask if it fails to meet those standards for whatever reason. 7. On the GitHub organization level, grant the _Owner_ privilege to at least one more maintainer. Not only does this help keep the organization alive in case the original owner fails to be responsive, or fails to fulfill their duties, it also allows for quick reaction in case another owner’s account be ever compromised. 8. Speaking of compromised: enforce that anyone with _Maintainer_ or _Owner_ status have two-factor authentication enabled for their GitHub accounts. Make regular audits to ensure everyone continues to comply. 9. Check the contributions of anyone before you grant them _Maintainer_ status on the GitHub organization. Ensure that a person is trustworthy before you grant them _Owner_ status on the GitHub organization. 10. When creating or reviewing a Cask, make sure it contains a line that says e. g., # downloads.example.com was verified to be a canonical download # site at the time it was first introduced to this Cask On each update, double-check whether the `url` stanza still points to the same domain name as the one in the comment. 11. On each update, download the payload from the given source, and verify the updated SHA256 matches the downloaded file. (It’s OK to automate this.) When generating the hash, never use plain HTTP to download the file if it’s also available via HTTPS from the same source. 12. Use common sense before you grant anyone commit access or other privileges. Regards! Claudia

7 years, 10 months

1
0
0 0

Re: Bundle Management improvements?

by Claudia Pellegrino

Hi, > Homebrew wants to own /usr/local as if nothing else is there. That’s what Homebrew _used_ to do. These times are long gone. (FULL DISCLOSURE for anyone who’s late to the party: Caskroom member here, with a few ties to the Homebrew project.) I have also used MacPorts, and I see how you prefer the `/opt` approach. Homebrew has come a long way to play as nice with everyone as MacPorts does today. Homebrew now lives exclusively in `/usr/local/Homebrew`. It installs packages into `../Cellar` and `../Caskroom`, and occasionally into `/opt` if it makes more sense. Anything else in `/usr/local` is free for anyone. I believe that for a package manager, this behavior is adequately modest. If you’re unsatisfied with the fact that Homebrew puts individual things into `/usr/local/bin` and under `/usr/local/lib`, then you might want to consider that the FHS has made them for exactly that purpose. Package managers on most Unix-ish OSes keep some stuff inside `/usr/local/bin` and `/usr/local/lib` because that’s what those directories were made for. With `brew link`, Homebrew invites all and any software to make use of its infrastructure, such as creating and maintaining symlinks for you so your software won’t have to. That’s purely optional though; anyone is free to completely ignore Homebrew, and have their software do its thing anywhere at their own discretion, and that includes `/usr/local`. > Many package managers do not really have strong vetting > or security policies. Homebrew is one of those. This is actually a quite important point you’ve made; I wish more people were aware of this! You are mostly correct, The Homebrew project is one of those package managers for a reason. Homebrew doesn’t want to be a software discovery service. Instead, it wants Homebrew users to make their own informed decisions as to whether they want to install a particular package or not. If `foobinator` is a known spyware, but at the same time notable and popular enough that users want a `foobinator` formula to be in Homebrew, then in Homebrew that formula be. The bottom line for users is: Do your homework before you decide to trust a particular software, with or without Homebrew. Homebrew wants that decision to be up to you, and only you. That said, Homebrew does have vetting processes in places. Not only does it support GnuPG signatures, it also enforces SHA256 hash verification for all formulas who include such a hash, which most formulas do. Whenever a formula needs to be updated, the tap maintainer double-checks that it still points to the same trusted upstream domain. The maintainer also downloads the payload from that trusted source, and verifies the updated SHA256 matches the downloaded file. This is not to make any guarantees that the software is safe to use. It is for you to be sure that you’re installing the exact same thing the tap maintainer has personally downloaded from an official source of the upstream package. Speaking of trust, my impression so far is that contributors are vetted quite carefully before they are granted commit access. Even when such access is granted, the project’s GitHub repos enforce reviews before anything gets merged into master branches, which are also the branches that get released to the public. Recently, the Caskroom organization has introduced a policy that requires every maintainer to use 2FA for their GitHub account. Of course, none of all those measures will guarantee 100 % security. Nor will any of it withstand any sufficiently sophisticated attack. But it’s enough to make me personally feel very safe using Homebrew and all its official taps. (CAUTION: as I have already stressed a number of times, the `claui/textmate` tap is NOT an official Homebrew tap, and will probably never be.) > I am just not sure unmanaged homebrew github repos is the thing. I can’t think of a reason for anyone to use an unmanaged tap. It absolutely needs to be properly maintained. Until some individual or organization is going to step up and adopt the tap, or we as a community figure out that a Homebrew tap might not fit our bill at all, I’ll gladly continue to help maintain it in the meantime as my time allows. Needless to say, I’m committed to the same standards and degree of diligence as I’d expect from any maintainer of a source from which I download and install executable software. What the repo needs most right now is more contributors and more maintainers. It needs people to add content so it becomes actually useful, and make people try it out. More maintainers means that we’d have forced reviews enabled for the entire master branch similar to the official taps, including veto rights for every maintainer. This is very important for security; as of right now, the repo is not safe to use because it requires users to trust me personally. Being a sole maintainer means nobody can guarantee that every commit, including my own, gets actually reviewed. > I would like to hear more before people just jump on the convenience. I fully agree, and I’m looking forward to discuss this further. Regards, Claudia > ------------------------------ > > Message: 2 > Date: Fri, 7 Jul 2017 16:19:42 -1000 > From: ??????? > To: TextMate users > Subject: [TxMt] Re: Bundle Management improvements? > Message-ID: <7CC8A118-F7C5-4318-A814-54636955B8B2(a)gmail.com> > Content-Type: text/plain; charset="utf-8" > > I am actually trying to avoid using homebrew. > There are lots of great things in homebrew but a few flaws are definitely the assumptions > about the path and also the total lack of vetting. > Homebrew wants to own /usr/local as if nothing else is there. > Mac Ports on the other hand is a bit more careful to use an uncommon path in /opt and that > is pretty valuable to me. > > Many package managers do not really have strong vetting or security policies. Homebrew > is one of those. > Mac Ports is also not great at that. > > It would be great if there were more guarantees than just whatever is on github and visible > to homebrew. > > A directory of sorts to work with would be great but I feel like this is clearly a modern > and missing feature, I am just not sure unmanaged homebrew github repos is the thing. > I would like to hear more before people just jump on the convenience. > > > > On Jul 7, 2017, at 12:02, Lewis Overton > > wrote: > > > > I use Textmate and Brew. Linking them sounds good. > > > > On Tue, Jul 4, 2017 at 11:03 AM, Ryan Fitzer > > wrote: > > > To install a tmbundle, you?d run: > > > > > > $ brew tm install arduino > > > If more than three people find this useful, I?ll be happy to piece together a small PoC. > > > > This would extremely useful. I use Homebrew for so much already. Having it for bundles > would a huge benefit. > > > > Ryan > > > > On Jul 4, 2017, at 1:51 AM, Claudia Pellegrino > > wrote: > > > > Hi, > > > > The features that stand out to me immediately are: [?] CLI searching and installing. > > Caskroom member here. With our recent integration into Homebrew last year, I think > Homebrew now brings to the table a big part of what would be needed to manage TM bundles > via CLI today. > > > > In fact, anyone is free to create an (unofficial) Homebrew tap for TextMate bundles. > A tap is just a GitHub repo, e. g. github.com/textmate/homebrew-bundles . > It would contain a number of package files, which essentially point to the individual > download URLs of the tmbundles. > > > > This is what the user would do once to tap into the repo: > > > > $ brew tap textmate/bundles > > To search for plugins, you?d run: > > > > $ brew tm search arduino > > ==> Exact Match > > tm-arduino > > To install a tmbundle, you?d run: > > > > $ brew tm install arduino > > If more than three people find this useful, I?ll be happy to piece together a small PoC. > > > > Regards, > > Claudia > > > > _______________________________________________ > > textmate mailing list > > textmate(a)lists.macromates.com > > http://lists.macromates.com/listinfo/textmate > > > > _______________________________________________ > > textmate mailing list > > textmate(a)lists.macromates.com > > http://lists.macromates.com/listinfo/textmate > > > > _______________________________________________ > > textmate mailing list > > textmate(a)lists.macromates.com > > http://lists.macromates.com/listinfo/textmate >

7 years, 10 months

1
0
0 0

Re: Bundle Management improvements?

by Claudia Pellegrino

Hi, The features that stand out to me immediately are: […] CLI searching and installing. Caskroom member here. With our recent integration into Homebrew last year, I think Homebrew now brings to the table a big part of what would be needed to manage TM bundles via CLI today. In fact, anyone is free to create an (unofficial) Homebrew tap for TextMate bundles. A tap is just a GitHub repo, e. g. github.com/textmate/homebrew-bundles. It would contain a number of package files, which essentially point to the individual download URLs of the tmbundles. This is what the user would do once to tap into the repo: $ brew tap textmate/bundles To search for plugins, you’d run: $ brew tm search arduino ==> Exact Match tm-arduino To install a tmbundle, you’d run: $ brew tm install arduino If more than three people find this useful, I’ll be happy to piece together a small PoC. Regards, Claudia

7 years, 10 months

5
5
0 0

First PoC ready (was: Bundle Management improvements?)

by Claudia Pellegrino

Hello じょいすじょん, I have pieced together a small proof of concept and put it online for anyone to try: https://github.com/claui/homebrew-textmate Feedback and pull requests welcome. Regards! Claudia

7 years, 10 months

1
0
0 0

JSLintMate not working as advertised

by Jack Royal-Gordon

HI! I’ve installed JSLintMate and am trying to use it on the JS for my Rails project. I’ve tried to turn off complaints about “$” and “document” being undefined, but can’t seem to do so. I’ve tried with a “.jshintrc” resource file, and also with inline configuration. My inline configuration currently looks like: /* jshint undef: false, unused: false */ // global $, document … I read in the docs that single-line comments work as well as open-close comments, so I tried both formats. Not only did it not turn off all messages regarding undefined and unused variables, but it also did not turn them off for “$” and “document”. Does anyone have an idea why? In case it helps, the messages look like: JSHint found problems: ‘$’ is not defined. line 3 $(document).ready(function() { ‘document’ is not defined. line 3 $(document).ready(function() { …

7 years, 10 months

3
2
0 0

Bundle Management improvements?

by じょいすじょん

7 years, 10 months

1
0
0 0

Crashes when compiling with Clang 5 and c++1z

by Ronald Wampler

Hi, I’m seeing a couple of crashes on startup when compiling TextMate with Clang 5 using c++1z. But, if compiled using the c++14 flag, everything is fine. I am not sure what has changed between c++14 and c++17 with regard to object lifetimes. Any ideas? Links to the crash reports: https://gist.github.com/rdwampler/13be77b93f8ff1f9f6a372576c8bc009 https://gist.github.com/rdwampler/f412a5dafd9c2f19b5f60b18375a3ce6 Ron

7 years, 10 months

1
0
0 0

How to always open files on the current Space?

by Kurt Ruff

I have several desktops ("Spaces" in Apple marketing parlance), typically with a few Terminal and TextMate windows on each. When I open a file (whether using File > Open… or the `mate` CLI), it often opens a tab in a TextMate window on another desktop, so I have to hunt through my desktops, detach the tab, and drag it back to the desktop I was originally using. Is it possible to change this behavior, so TextMate always opens the file in a window on the current desktop? - Kurt

7 years, 11 months

4
4
0 0

OCaml bundle is not loaded

by Louis Abraham

Hi, I tried uninstalling and reinstalling, but the OCaml bundle does not work: - I can't select the OCaml language - I doesn't appear in the Edit Bundles menu. The /Users/louisabraham/Library/Application Support/TextMate/Managed/Bundles/OCaml.tmbundle folder exists and looks fine. Has anybody the same problem? Thanks, Louis Abraham

7 years, 11 months

2
2
0 0

Dragging a tab to a new window

by Carpii UK

Is there any option or defaults setting which allows me to drag a TM tab out of the TM window (onto desktop for example) and have it work as if you're trying to 'Move Tab to New Window' I'm probably imagining it, but I feel like you could do this at one point. Not a huge issue, as I can see I can assign a keyboard shortcut for it, it just seems a little odd that it always treats dragging as the file contents Thanks

7 years, 11 months

3
5
0 0

yes

by Anthony Chiello

very happy thank u

7 years, 11 months

1
0
0 0

undo

by Kyle Johnson

When I am using TextMate to edit a LaTeX file, I find that command+Z (i.e., undo) no longer works. Rather than undoing something, it moves the cursor to about the middle of the document I am working on. Anyone else having this behavior? I’m using TexMate 2.0-rc.7 on 10.12.5. Kyle

7 years, 11 months

3
6
0 0

love it

by Anthony Chiello

thank you

7 years, 11 months

1
0
0 0

Rdaemon

by Ross Ahmed

How can I send code from a source .R file to a Rdaemon window? Or is this not how Rdaemon is intended to be used? Is it intended to be used ad hoc within a TextMate window for tasks such as simple calculations? Many thanks Ross

8 years

1
0
0 0

Automated diff + export of personal mods from bundles?

by Tim Bates

Hi all, Like many of us, I suspect, I’ve got core bundles (like markdown, regex etc.) that I have customised with new snippets and commands, or just just tweaks to language. I’d like extricate my code from these, so that 1. I can let TM2 easily update the mainstream bundle 2. I can control my mods 3. From that base of clarity, I can submit generally-useful changes back to the widely used central repo. Are there any solutions to 1. Diffing the pristine bundle with my dirty copy? 2. Exporting modified snippets and commands to my personal repo Ideally, the UUID exported commands would be entered into the plist of my personal repo, perhaps under “exported from <bundlename> as a menu name. Hope others have had this problem and solved it :-) Otherwise bit of a manual trek in store for summer :-) Best, tim

8 years, 1 month

5
5
0 0

hang if ⌘⇧T is called before syntax highlighting is complete

by Tim Bates

Hi, I’ve noticed for a while that if you load a file that takes a while to syntax highlight and prompty press "⌘⇧T” (the function browser), textmate spins the beachball, becomes unresponsive and never seems to come back (hard crash out). best, tim

8 years, 1 month

1
0
0 0

Re: Ruby on Rails bundle hasn't caught up to Rails 5

by Greg

Would be unfortunate if MiniTest isn’t supported in Rails since it appears that many Rails developers use TextMate, and Minitest is the default testing framework. (Not to take away from RSpec, it is popular. I started with MiniTest and since I’m a Newbie I’m reluctant to add more confusion by changing testing methods. Am I right in understanding that the Ruby on Rails bundle has the testing baked in and doesn’t use the version installed on the users computer? More info on the change and background: Rake commands have been changed to Rails commands. This was done to avoid confusion (no way to tell whether to use rake or rails). https://github.com/rails/rails/issues/18878 Overview of Rails 5 changes: https://www.youtube.com/watch?v=OaDhY_y8WTo A Guide to Testing Rails Applications — Ruby on Rails Guides <http://guides.rubyonrails.org/testing.html> > > Rails 5 uses `rails` instead of `rake` for everything, including running > tests. > > I may look into this if I find some time, but unfortunately all Rails > projects I?m working on use RSpec instead of Test::Unit, so this is not > really a problem for me personally and thus rather low-priority ? > > (On a side note: the RSpec bundle works fine with Rails 5 :-) > > > Stefan > > Am 17.03.17 um 09:05 schrieb Koen Punt: >> What's the problem with rake? >> >> Koen >> On Mar 16 2017, at 11:47 pm, Greg <web(a)web.knobby.ws> wrote: >> >> I usually use the command line for testing (I?m more or less a >> newbie to testing), but thought I?d try staying in TextMate, but see >> it's still using Rake. >> >> I wish I could help, but I?m already in over my head. >> >> Greg

8 years, 1 month

1
0
0 0

Rails testing hasn't caught up to Rails 5

by Greg

I usually use the command line for testing (I’m more or less a newbie to testing), but thought I’d try staying in TextMate, but see it’s still using Rake. I wish I could help, but I’m already in over my head. Greg

8 years, 1 month

3
2
0 0

R Notebooks

by Ross Ahmed

R notebooks sound great: https://www.r-bloggers.com/r-notebooks/amp/?utm_source=feedburner&utm_mediu… Any way of implementing these in TextMate? Ross Ahmed Ecologist -- 07875533906 Twitter: @RossAhmed LinkedIn: Ross Ahmed

8 years, 1 month

2
1
0 0

inode caching

by Carpii UK

I'm hoping a TM dev could point me in the right direction of where TM's inode caching takes place please? I'm struggling to find it, but I think it might be one of the sources of my issues using TM on a mounted remote filesystem Quite often, if I change git branch on the remote filesystem (done via ssh cmdline) it can end up with TM 'quick open' opening a completely different file. This issue persists until the volume is unmounted and remounted. I'd like to compile a custom TM which disables inode caching if possible Thanks

8 years, 1 month

2
2
0 0

bbcode bundle

by "Bodo Büttner"

8 years, 2 months

6
11
0 0

Re: "Half focused" windows bug

by Graham Heath

Hello Ed, All, None of my previous theories worked out, but I think I’ve had a break through on this. I can trivially reproduce it now by switching between iTerm2 and TextMate, very quickly. Finder might work too, but I’ve been using iTerm. The key seems to have less to do with which app, and more to do with how fast. My machine is slow which may make the problem worse. What I do know is if I reset my configs to their defaults (by removing ~/Library/Application Support/TextMate), this problem is eliminated. Adding folders back one at a time TextMate still works until I add the Session/Info.plist back. I’ve attached my info.plst and made a video of what I see while I’m working on this; https://youtu.be/C0nyIr5_dTQ Ed, does removing this file do anything for you? Everyone; Does this make any sense? Does anyone know where to begin solving this bug? I sure don’t. Thanks, Graham Heath On February 15, 2017 at 7:48:39 AM, Ed Wong (scampy(a)me.com) wrote: Graham, I don’t have Diff Gutter enabled, just the standard line numbers, folding arrows, bookmarks in the gutter. Ed On 14 Feb2017, at 3:56 PM, Graham Heath <graham.p.heath(a)gmail.com> wrote: Thanks for the answers. What all is happening here is still a mystery but I’ve got an update; I’ve now had 24 hours without incident. My current theory is this relates to SCM Diff Gutter, as after disabling it I haven’t seen the issue, but thats just a theory. I’m re-enabling Emmet today, and I’ll add my linters tomorrow. Ed, do you have SCM Diff Gutter, or anything adding icons to your gutter? Thanks, Graham Heath On February 10, 2017 at 9:08:03 PM, Ed Wong (scampy(a)me.com) wrote: 1: have more than a few TextMate windows or tabs open? Usually many windows with many tabs. Some windows are minimized (those that I’m not actively working on at the moment). 2: have a customized window bar title? Yes - full document path. 3: have expensive to render documents? A few files with > 5000 lines but generally < 1500 lines of PHP, ObjC, HTML, JS or CSS. Some customizations done to PHP bundle and Mac Classic theme. 4: SCM integration? Git on some projects. Hope this helps. Ed On Feb 10, 2017, at 5:33 PM, Graham Heath <graham.p.heath(a)gmail.com> wrote: This continues to happen to me a few times a day, exclusively in TextMate. Some days are worse, maybe better after a reboot, but thats not for sure. Some more theories for you Ed, and anyone else :) Do you … 1: have more than a few TextMate windows or tabs open? 2: have a customized window bar title? 3: have expensive to render documents? 4: SCM integration? Here’s what I’m thinking _might_ be happening for each of these. Hopefully one of these sparkles for someone. 1) TM is confused about what tab / window should have focus, and fails to pick one. 2) I have a pretty complex stack of replacements to build my window title, perhaps one of these replacements has a edge case that causes an error 3) TM may be selecting the right tab, but the selection doesn’t happen in a reasonable time and aborts 4) The timing between focus and TM failing to select a tab seems related to when the title bar updates when SCM is working I’ve been experimenting with disabling plugins and add ons. Today I’m going to try disabling the SCM plugin :( If that doesn’t work I guess I’ll build TM and see what I can find. Short of building it, there’s not a way better debug this issue, is there? Thanks, Graham Heath On February 1, 2017 at 7:05:23 AM, Ed Wong (scampy(a)me.com) wrote: Hi Graham, My TM setup is pretty basic. No plug-ins, Shell Support installed, Git support sometimes depending on the project. I think Allan may be right though as I’ve seen this behaviour with Safari and Finder as well so it could be an general OS issue. Ed On Jan 31, 2017, at 10:23 PM, Graham Heath <graham.p.heath(a)gmail.com> wrote: Allan, I’m sorry to say, that this is behavior that I associate with TextMate, not the os at large. I will keep an eye out for it and let you know if I change my mind. But, as you’ll see below, I don’t really blame your code either, I’m just wondering whats causing it. Its so erratic that its probably not something simple. Jacob, Ed, and others; Do you have any plugins? I haven’t done the full reset, but I have disabled things that I feel might be offending. Its too early to say, but I wonder if a plugin might be triggering when the app gets focus, but something isn’t going quite right. Tossing this on the pile; I’m using a early 2013 mbp that does seem to have issues with apps hanging or freezing fairly often, so maybe whatever’s causing that, is causing this. Thanks, Graham Heath On January 14, 2017 at 11:44:42 PM, Allan Odgaard (mailinglist(a)textmate.org) wrote: On 14 Jan 2017, at 5:54, Graham Heath wrote: > I’m regularly experiencing a bug where TextMate seems to receive > partial > focus. The title bar will appear to be selected, but the tabs never > come > into focus […] This issue has existed with macOS for as long as I can remember, and I have seen it for other apps as well, though it is visually much more obvious with TextMate because of the tabs bleeding into the title bar. I do not think the issue is with any of my code, since window management is not the responsibility of the individual app and I am not aware of code in TextMate that could affect this. _______________________________________________ textmate mailing list textmate(a)lists.macromates.com http://lists.macromates.com/listinfo/textmate _______________________________________________ textmate mailing list textmate(a)lists.macromates.com http://lists.macromates.com/listinfo/textmate _______________________________________________ textmate mailing list textmate(a)lists.macromates.com http://lists.macromates.com/listinfo/textmate

8 years, 2 months

4
5
0 0

env: ruby18: Permission denied

by David Bourguignon

Hi all, since a few days, my textmate2 commands using ruby won’t start and just yield an error : env: ruby18: Permission denied I can’t recall any major change in my system recently. Has anyone an idea? David Bourguignon

8 years, 2 months

2
4
0 0

Hide or show tab bar

by Hans Schülein

When opening a new tab a tab bar appears. Is there a way to hide it, after closing all tabs besides one? Or show it when it is not visible yet?

8 years, 2 months

2
1
0 0

hidden files showing up all of a sudden in project drawer?

by Jack Wu

All of a sudden I have *.pyc files showing up in my project drawer. I have not changed any textmate config files or application versions. I am using 2.0_b10, but have also tested 2.0_rc4. I have also restarted my computer. I am using OSX 10.12.3. I am using the default config values for inclusion and exclusion: */Applications/TextMate2.0_b10.app/Contents/Resources/Default.tmProperties*exclude = "{*.{o,pyc},Icon\r,CVS,_darcs,_MTN,\{arch\},blib,*\~.nib}" include = "{*,.tm_properties,.htaccess}" binary = "{*.{ai,bz2,flv,gif,gz,icns,ico,jpg,jpeg,m4v,nib,o,pdf, png,psd,pyc,rtf,scssc,swf,tar,tbz,tgz,tif,tiff,zip},Icon\r}"

8 years, 2 months

2
2
0 0

Textmate Book

by "Bodo Büttner"

8 years, 2 months

2
2
0 0

Bug report: Ruby error when running "Comment Line" in some Terraform documents

by Alex Chan

I’ve hit a bug when using “Comment Line” in Terraform documents, although it only occurs on certain lines. # Steps to reproduce 1. Install the Terraform bundle. TextMate > Preferences > Bundles > Terraform. 2. Create a file called "~/Desktop/example.tf" and change the document syntax to "Terraform". 3. Enter the following contents in the file (between the '===' bars): === variable "aws_region" { default = "us-east-1" } === Note that line 4 contains whitespace, although the exact whitespace chars seem to be arbitrary. 4. Place the cursor as follows: a) At the start of line 1 b) Select all of line 1 c) Select all of line 4 (whitespace) d) At the start of line 4. After each, press ⌘+/ to Toggle Comment. # Expected results a/b) Line 1 will be commented out. c/d) Line 4 will be commented out. Note: in Terraform syntax, a comment is denoted by /* ... */ # Actual results d) Works correctly. All of a)-c) result in 'Failure running “Comment Line”.', with different errors: a) Comment Line:140:in `<main>': undefined method `to_a' for "\u0000variable \"aws_region\" {":String (NoMethodError) b) Comment Selection:140:in `<main>': undefined method `to_a' for "variable \"aws_region\" {\n":String (NoMethodError) ${0:} c) Comment Selection:140:in `<main>': undefined method `to_a' for " \n":String (NoMethodError) ${0:} Broadly similar – it just seemed a little odd that it doesn’t also affect the case where your cursor is on a line containing whitespace. # Environment * macOS 10.12.1 (16B2657) * TextMate version 2.0-rc.7 * ruby 2.0.0p648 (2015-12-16 revision 53162) [universal.x86_64-darwin16]

8 years, 2 months

2
1
0 0

AS3 bundle adds extra indents on each line (TM2)

by Simon Lucas

I'm using Textmate on Yosemite 10.10.15 The AS3 bundle has been updated for TM2 and I have that one installed Each line I type adds an extra indent to the one before, where they should line up If I delete the extra indent and start typing it just adds the indent again I have two installs of TM2 both on Yosemite 10.10.5 and each one displays the same behaviour. I tried another bundle (I forget which – maybe python) and the indent behaviour was normal. How can I work out where the error is and how to trouble-shoot it, please?

8 years, 2 months

2
1
0 0

Bulletin Board Bundle Item

by "Bodo Büttner"

8 years, 2 months

1
0
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

TextMate