- TextMate - lists.macromates.com

by xxx

Hi! I'm having some problems with a table where I need to include multiline text (large text). I would like to have the same behaviour as a standard paragraph but text is cut when arribing to the right margin instead of continuating in a new line. I'm using: \begin{tabular}{|c|c|l|} \hline ... Any idea? Thanks! xxx xxxx Warning: This e-mail is privileged, confidential and contains private information. Any reading, retention, distribution or copying of this communication by any person other than its intended recipient is prohibited.

15 years, 9 months

1
0
0 0

Re: Python: Extra Output

by neoethical

I don't get the extra output when running it in terminal. Again, no big deal, it's just kind of annoying. Thanks for the help.

15 years, 9 months

1
0
0 0

Python: Extra Output

by neoethical

Hi, I am completely new to programming and am trying textmate out based on some reviews I've read. I'm learning python as my first language. My question is this: I am writing basic small programs in python and when I run the program to see if it works, even if it works properly it always finishes the output with the last data that I enter into it. For example, if I enter: n = input("Please enter a whole number: ") fact = 1 for factor in range(n, 1, -1): fact = fact * factor print "The factorial of", n, "is", fact When I run the program (with an input of '10'): ' Please enter a whole number: The factorial of 10 is 3628800 10' When I run the program in IDLE I don't get the extra output. Thank you.

15 years, 9 months

3
2
0 0

Feature Request: Minimap from Sublime Text Editor

by Ale Muñoz

Check this and drool: http://www.sublimetext.com The minimap thingie looks like a killer feature (or a gimmick, depending on your taste : ) Maybe for TM3 ? : ) -- Ale Muñoz http://sofanaranja.com http://bomberstudios.com

15 years, 9 months

3
2
0 0

Project Plus-Bug?

by Niels Kobschätzki

Hi, I am not sure if I'm just using an old version but it seems that there's a bug with project plus. If I am dragging a folder from the Finder to the TextMate-icon and TextMate is closed, TextMate will open with the "old" drawer. If I open the folder from within TextMate (e.g. via Recent Items) or if I drag the folder to TextMate when it's already open the Project Plus- drawer opens. I made a short video that shows the problem: http://www.youtube.com/watch?v=b802UokTNjg I am using Mac OS 10.6.1, TextMate 1.5.8 (1509) and I'm not sure how to figure out which version of Project Plus I'm using. Niels

15 years, 9 months

3
2
0 0

Opening Gif files

by Enrique Ramírez

A while ago, while on project view, I dragged a .gif file from the project drawer to the main textmate window, which opened the file in the text editor. I simply closed it and move on. Ever since, everytime I select a .gif file on the project drawer it opens the file on textmate, when most of the times I just want to drag it to my dock and open fireworks. I've searched everywhere and couldn't find where to cancel this behaviour, to no avail. Help? -- View this message in context: http://www.nabble.com/Opening-Gif-files-tp25530149p25530149.html Sent from the textmate users mailing list archive at Nabble.com.

15 years, 9 months

2
2
0 0

Other Diff

by Brad Hutchins

Hey is there a more advanced version of the Diff for textmate (like Exam Diff or Beyond compare), that would allow us to look at individual words or characyter differences per line rather then just line by line?

15 years, 9 months

5
4
0 0

Re: How to do basic things with files and project drawer

by Fabio

Thanks for the reply, please see comments below: >> 1. New Project >> >> [...] >> The question: is there any way to have the paths set from my "root" >> element? >> For example if I drag an image that is placed into /myroot/img/ the >> html file that gets it uses a src link like "../../img/image.gif". Is >> it possible to have "/img/image.gif" instead? > > I do not quite understand. But if you drag eg an image from the > drawer/ > Finder to an HTML document TextMate will insert the relative path seen > from that HTML document, this ensures that the HTML doc can see the > image file later on. I mean that I usually prefer to set all my image paths to something like "/img/file_name.gif" instead of TM way: "../../img/file name.gif", they both normally work yes, but when you are using apache mod_rewrite or when, later, you want to move the file somewhere in other directories, by using default TM path you should address all paths to the new location (or mod_rewrite path). By using the "absolute relative path" like "/img/image.gif" the image will always work even if you move the file into a directory like: test/small_files/long/path/myhtml_file.html or /short_path/myhtml_file.html >> 2. Project Drawer and new files in project >> >> How can I create a new file or duplicate an existing one? > > If you did select the file in question simply press ??S (Save As) > to duplicate it. That is what I usually do, but with the problem that Project Drawer is not correctly updated: the old file disappears from PD tree. I have to restart TM to see it again. It is always there anyway, it seems to be only a display problem of TM project drawer. For Exemple, if open a file called "menu.html" that is placed inside / models/menu.html, and then I choose "Save As..." and select /test.html as the new saving location and name, Project Drawer will show me a file called "test.html" placed into /models and no file in the project root. I have to close TM and restart it to see files where they really are. Do you confirm? >> 3. While I editing CSS or HTML files, sometimes I need the color >> chooser, the default keys CTRL + SHIFT + C do not open it. That keys >> seems to be used by the default Math bundle. Is the solution to >> manually change such keys in Math bundle? Why TM provides such >> overlapping keys? > > TextMate doesn't listen on the ?^C, thus deleting that short-cut in > the Math bundle won't work. > > If you're inside a CSS doc or inside a CSS scope (ie if your caret in > inside of "<style type="text/css">?</script> of an HTML file) press > ??C. From others ^? > CSS > Insert Color? correct, but when I have an open file like could be "test.css" and CSS language is associated to such file, if I am creating a rule and I hit [ CTRL + SHIFT + C ] why it does not open color picker but Math bundle instead? The same happens when I am inside a .html file and the caret is placed into tags: <style type="text/css" media="screen"> color: </style> > 4. A little "bug" with file tabs > > In addition ^?R will select the current doc in the drawer. > > If you need your own way to display the name simply create a new > tmcommand in the bundle editor: > Input: Discard: > Output: Show as Tooltip > Command: > echo "$TM_FILEPATH" > > and bind it to any short-cut. that is ok, but is always a patch to the wrong (in my opinion) behaviour of TM with not visible tabs. In DW CS3 for example, active tab is always displayed in tabs list. In TM you need to see tab even if you want o drag the file tab near to another for faster select. But you can't do that at the moment. >> And I don't understand where TM places the new file if no >> directory is selected. > > If you press ??N (New File) you will see a dialog with a field > called ?Location?. This will be the place you're looking for. correct, but like before Project Drawer tree seems buggy: If I create a new file with SHIFT + CMD + N, and I set location to "/ models" and file name to "test.html", sometimes I see the new file placed at the end of the list at the same level of the project root. Sometimes I will see the file twice: once inside "models" directory and also at the end of the list, out of models directory. If I restart TM, the files listing in project drawer remains the same (double file) and I cannot understand why. If I want to delete it, I have to delete both files from Project Drawer. In the finder the file is placed correctly, but again there is a problem with PD tree. That is very strange and is confusing me. Thanks for the help! -- Ciao Fabio -- Caselle da 1GB, trasmetti allegati fino a 3GB e in piu' IMAP, POP3 e SMTP autenticato? GRATIS solo con Email.it http://www.email.it/f Sponsor: Last Minute a Riccione. Scopri le offerte su vacanzedivertenti.it * Buona Vacanza! Clicca qui: http://adv.email.it/cgi-bin/foclick.cgi?mid=9525&d=15-9

15 years, 9 months

2
1
0 0

How to do basic things with files and project drawer

by Fabio

Hallo, I am trying to understand how to do some basic operations with text mate but I didn't find help in the manual, wiki o faqs so I try here: 1. New Project I used to have all my web project files and directories inside a main directory, when I create a new project in textmate I drag such "main" folder into TextMate icon and save project. That seems correct and seems to be the only way that allows files or directories created later in the finder to appear in the project without the need to manually drag them. The question: is there any way to have the paths set from my "root" element? For example if I drag an image that is placed into /myroot/img/ the html file that gets it uses a src link like "../../img/image.gif". Is it possible to have "/img/image.gif" instead? 2. Project Drawer and new files in project How can I create a new file or duplicate an existing one? The alternatives seems to be: - go to the file menù and select "new" but in this way the new file appears in a new window outside the project and I don't know why; - go to project drawer, select the directory where I want to create it and hit new file button. Seems ok but Project Drawer behaviour feels a bit strange sometimes. - use the file menu and "Save as..." to save the current file with a new name to duplicate it. That's seems quite ok but Project Drawer seems bugged about: If I do that, I cannot see the old file in PD, or I can see it but it seems to have the same name of the new file created (that is no true). To fix it I have to quit and restart PD. Is there any way to have PD list updated correctly? - go to the finder and make duplications from there. But this way is longer than any other and I think it should be possible from TM. Further more if I want to delete a file, the only way I found in PD is to *select the file twice* (why?) and then hit the "delete" keyboard button. There is no "delete" command in the right click menu, as for duplicate. If I use the new file or new directory button in PD without selecting anything the behaviour is more strange: the file is placed or displayed in a some strange location in the project tree. The directory is called "group" but I don't know what it means. 3. While I editing CSS or HTML files, sometimes I need the color chooser, the default keys CTRL + SHIFT + C do not open it. That keys seems to be used by the default Math bundle. Is the solution to manually change such keys in Math bundle? Why TM provides such overlapping keys? 4. A little "bug" with file tabs When opened files number exceed TM window width, other files are visible under the ">>" button of tab list. Unfortunately if you need to work on a file listed in ">>", you cannot see it selected in the tabs so it is difficult sometimes to know on wich file you are working or where it is placed. Thanks. Fabio -- Caselle da 1GB, trasmetti allegati fino a 3GB e in piu' IMAP, POP3 e SMTP autenticato? GRATIS solo con Email.it http://www.email.it/f Sponsor: Cerchi un hotel per le prossime vacanze a Riccione? Vai su vacanzedivertenti.it Clicca qui: http://adv.email.it/cgi-bin/foclick.cgi?mid28&d-9

15 years, 9 months

4
4
0 0

Configuring HTML Tidy

by 3zzy

I would like to use Textmate's built-in Tidy (Ctrl+Shift+H) functionality to indent my HTML 'without modifying anything' in the code. I write pretty neat HTML already, I just need Tidy to indent my code with Soft-tabs. Currently it breaks a lot of things and the formatting isn't perfect either. Can someone please write a Tidy config for me that does this: 1 - Indents only, nothing else. 2 - I don't need certain tags to be pushed on a newline. For example: Tidy does this: <li> # link </li> Original Code (or What I need): <li> # link </li> ..so if I can pre-define which tags to be kept inline, that would be great. Basically, I'd like to duplicate Dreamweaver's HTML formatting functionality with Tidy, but the two things mentioned above are really important. I think this is my current (default?) Tidy config: ${TM_TIDY:-tidy}" -f /tmp/tm_tidy_errors -iq -utf8 \ -wrap 0 --tab-size $TM_TAB_SIZE --indent-spaces $TM_TAB_SIZE \ --indent yes \ ${TM_XHTML:+-asxhtml --output-xhtml yes} \ ${TM_SELECTED_TEXT:+--show-body-only yes} \ --enclose-text yes \ --doctype strict \ --wrap-php no \ --tidy-mark no` I'd greatly appreciate any help. Thanks! -- View this message in context: http://www.nabble.com/Configuring-HTML-Tidy-tp25420981p25420981.html Sent from the textmate users mailing list archive at Nabble.com.

15 years, 9 months

5
8
0 0

Re: Snow Leopard, Blogging Bundle. Error message added at the top of document after successful posting

by David Chin

Thanks, Allan and Sam - your suggestion worked, and I've documented the steps I took at http://www.davidchinphoto.com/snow-leopard-and-adobe-unit-types-osax/ ==== David Chin http://www.facebook.com/people/David_Chin/528318091 http://www.davidchinphoto.com/ http://www.flickr.com/photos/davidchinphoto/ http://www.pbase.com/dlcmh > On Sep 13, 2009, at 20:57 , Allan Odgaard wrote: > >> On 13 Sep 2009, at 09:49, David Chin wrote: >> >>> [...] I get an error message that looks like this: >>> >>> 2009-09-13 15:38:10.711 osascript[5261:903] Error loading >>> /Library/ScriptingAdditions/Adobe Unit Types.osax/Contents/MacOS/ >>> Adobe >>> Unit Types: dlopen(/Library/ScriptingAdditions/Adobe Unit >>> Types.osax/Contents/MacOS/Adobe Unit Types, 262): [...] >> >>> [...] >>> Any ideas on where in the Blogging Bundle I can make this change? Or >>> does the change need to be made in one of the Ruby libraries? >> >> You need to get rid of: /Library/ScriptingAdditions/Adobe Unit >> Types.osax > That's what I thought as well; and indeed, after removing this file, > the warning was gone. However, Photoshop (CS3) started complaining > that it had not been installed properly at every launch. Nevertheless, > it worked just fine. > Make your choice :-) > > Sam

15 years, 9 months

1
0
0 0

Line Break and Soft tabs strangeness on Snow Leopard

by Peer Allan

I recently updated to Snow Leopard and I am having a really odd thing pop up. Right now when editing a file I can click any where in the window and the cursor will be inserted there. The funny part is that I can click to the right of a line break and the cursor will stay there. If I start typing the line break jumps to the right of my current position. Another funny thing is with soft tabs. In my Ruby files previously if I entered a tab (2 space soft) and then hit delete it would remove the full tab (both spaces). Now when I hit tab it inserts the 2 spaces but if I have to press delete twice to clear it because it only removes one space at at time. Anyone else seen something like this? Or anyone kno Peer Allan Development Team Lead, e-Business CanadaDrugs.com 24 Terracon Place Winnipeg, MB, Canada R2J 4G7 Phone: (204) 654-7951 Fax: (204) 654-7910 www.canadadrugs.com

15 years, 9 months

2
2
0 0

Snow Leopard, Blogging Bundle. Error message added at the top of document after successful posting

by David Chin

After upgrading to Snow Leopard, I tried to post to my Wordpress blog via Textmate's Blogging Bundle, which I've used with absolutely no problems in the past. Now, however, the post gets posted to the blog OK, but in the Textmate document itself, I get an error message that looks like this: 2009-09-13 15:38:10.711 osascript[5261:903] Error loading /Library/ScriptingAdditions/Adobe Unit Types.osax/Contents/MacOS/Adobe Unit Types: dlopen(/Library/ScriptingAdditions/Adobe Unit Types.osax/Contents/MacOS/Adobe Unit Types, 262): no suitable image found. Did find: /Library/ScriptingAdditions/Adobe Unit Types.osax/Contents/MacOS/Adobe Unit Types: no matching architecture in universal wrapper osascript: OpenScripting.framework - scripting addition "/Library/ScriptingAdditions/Adobe Unit Types.osax" declares no loadable handlers. Doing a Google search on this, I found a discussion at http://forums.adobe.com/message/2225123, where it was suggested that calls to osascript be done like this: arch -i386 osascript scriptname.extension Any ideas on where in the Blogging Bundle I can make this change? Or does the change need to be made in one of the Ruby libraries? Thanks for any help. ==== David Chin http://www.facebook.com/people/David_Chin/528318091 http://www.davidchinphoto.com/ http://www.flickr.com/photos/davidchinphoto/ http://www.pbase.com/dlcmh

15 years, 9 months

3
2
0 0

Error using mate

by Nirias

I am getting errors when running "mate" only while logged in as admin. Things work fine when logged in as a regular user. This involves textmate 1.5.9 on OSX 10.6 and I am seeing the issue with both of my macs (mid-2007 imac and feb 2008 mbp). I did not encounter this prior to the Snow Leopard and textmate 1.5.9 upgrades. Starting bash, then doing a "login admin" and then attempting to edit produces this error: mate test.txt Tue Sep 8 03:09:15 Mothra-2.local mate[17070] <Error>: kCGErrorFailure: Set a breakpoint @ CGErrorBreakpoint() to catch errors as they are logged. _RegisterApplication(), FAILED TO establish the default connection to the WindowServer, _CGSDefaultConnection() is NULL. the console is hung at this point until you hit Control-Z Trying again with sudo changes the error to this: sudo mate test.txt 2009-09-08 03:00:06.946 mate[17053:e07] An uncaught exception was raised 2009-09-08 03:00:06.949 mate[17053:e07] *** -[NSArray objectAtIndex:]: index (-1 (or possibly larger)) beyond bounds (0) 2009-09-08 03:00:06.950 mate[17053:e07] *** Terminating app due to uncaught exception 'NSRangeException', reason: '*** -[NSArray objectAtIndex:]: index (-1 (or possibly larger)) beyond bounds (0)' *** Call stack at first throw: ( 0 CoreFoundation 0x926b258a __raiseError + 410 1 libobjc.A.dylib 0x965a6f49 objc_exception_throw + 56 2 CoreFoundation 0x926f63f1 -[__NSArray0 objectAtIndex:] + 209 3 mate 0x000026e3 0x0 + 9955 4 mate 0x000037af 0x0 + 14255 5 mate 0x0000261a 0x0 + 9754 6 mate 0x00002535 0x0 + 9525 ) Trace/BPT trap the console is not hung after this error message Any help would be greatly appreciated. thanks Nick

15 years, 9 months

2
1
0 0

Problem with scope selector in Rails bundle

by Santosh Mani

Hello, I am using Textmate 1.5.9. When I visit a .erb file or a .html.erb file the scope selector identifies the source as being source.ruby.rails rather than the text.html.ruby which I believe is the correct scope. As a consequence a lot of my snippets are unavailable. Thanks for any suggestions you might have. Cheers, Santosh ------ The following is the definition of the language: { scopeName = 'text.html.ruby'; fileTypes = ( 'rhtml', 'erb', 'html.erb' ); foldingStartMarker = '(?x) (<(?i:head|body|table|thead|tbody|tfoot|tr|div|select|fieldset|style|script|ul|ol|form|dl)\b.*?> |) |\{\s*($|\?>\s*$|//|/\*(.*\*/\s*$|(?!.*?\*/))) )'; foldingStopMarker = '(?x) (</(?i:head|body|table|thead|tbody|tfoot|tr|div|select|fieldset|style|script|ul|ol|form|dl)> |^\s*--> |(^|\s)\} )'; patterns = ( { name = 'comment.block.erb'; begin = '<%+#'; end = '%>'; captures = { 0 = { name = 'punctuation.definition.comment.erb'; }; }; }, { name = 'source.ruby.rails.embedded.html'; begin = '<%+(?!>)[-=]?'; end = '-?%>'; captures = { 0 = { name = 'punctuation.section.embedded.ruby'; }; }; patterns = ( { name = 'comment.line.number-sign.ruby'; match = '(#).*?(?=-?%>)'; captures = { 1 = { name = 'punctuation.definition.comment.ruby'; }; }; }, { include = 'source.ruby.rails'; }, ); }, { include = 'text.html.basic'; }, ); }

15 years, 9 months

2
1
0 0

Mass editing Snippets

by Ibrahim Ezzy

Hi, I use the ZenCoding Bundle for HTML/CSS, but frequently I need to use HTML snippets in PHP files too. Yes, I can change the scope from just 'text/html' to 'text..html, source.php' but editing hundreds of snippets would take time. Is there a shortcut method to achieve this? Thanks in advance for your help.

15 years, 9 months

3
2
0 0

Language code snippets

by Juan Falgueras

Hi JavaScript, a simple (I hope) question. Why the JavaScript Language Grammar only recognize as foldingStartMarker the "function" key word while Ruby, for example, recognizes all its possibilities for it to build any kind of block? I know, ruby has more followers in the TM community, I understand. But JavaScript opening of blocks are much more standard than ruby ones and it should be interesnting to have a repository from where to take small code snippets as this pari foldingStartMarker/foldingEndMarker that are so common in all the languages. In the meanwhile I have borrow the ruby part of text and substitute the JavaScript part (changing only def by function and end by }) and it seems to work :) - juan falgueras

15 years, 9 months

1
0
0 0

Problem with completing labels in LaTeX bundle

by Hooman Javidnia

Hello List, This is a small problem, but since I encounter it many times a day I thought that I'd ask it on the list, maybe there is a solution for it, or there is something that I don't kknow. Let's say I have a figure with \label{fig:plin-power-up}. When I want to refer to this figure using \ref command, when I type "\ref{plin" and press option+esc, the label that I am looking for is not properly found. I have to scroll through a long list of labels (including labels that don't have the word plin at all) to find the correct one. On the other hand, if I type "\ref{fig:plin" and press the option+esc keyboard shortcut, I am presented with the correct label (the list is much shorter this time), but when I select it from the list and press enter what I get is \ref{fig:fig:plin-power-up}. Then I have to go back and delete the extra "fig:" Is there something that I am doing wrong? Any help is greatly appreciated. Best, Hooman Javidnia

15 years, 9 months

1
0
0 0

can't find "g++" on PATH problem

by Matt Hogan

So I've been trying to use TextMate for coding in c/c++ instead of Xcode as of late, but any time I do a command-R to run my code, I get this error: The current PATH is: "/usr/bin /bin /usr/sbin /sbin /usr/local/bin /usr/X11/bin Please add the directory containing “g++” to PATH in TextMate's Shell Variables preferences. Alternatively, the PATH can be retrieved from Terminal but this requires a relaunch: " Even when I try to retrieve the PATH from Terminal, I still get this error. Has any one run into this kind of problem before? Searching yielded no results, so I was hoping that someone here could help me. Thanks in advance, -Matt -- View this message in context: http://www.nabble.com/can%27t-find-%22g%2B%2B%22-on-PATH-problem-tp25410391… Sent from the textmate users mailing list archive at Nabble.com.

15 years, 9 months

2
1
0 0

GetBundles installation problem

by Piero D'Ancona

I just installed GetBundles and it does not work for me. If I invoke the GetBundles command, a tooltip appears saying 'unknown command, try help' Narrowing down the problem, the script breaks down immediately at the first invocation of "$DIALOG". Needless to say I have the cutting edge TextMate and tm_dialog2 is at its place, which coincides with the path given by echo "$DIALOG" Any ideas? Thanks Piero

15 years, 9 months

4
9
0 0

[FIXED] Interactive Input on Snow Leopard.

by Luke Daley

Hi all, I believe I have fixed the issues with interactive input on Snow Leopard. However, this should be considered beta until it gets included in the TM distribution. That said, if you are brave enough to test it it would be very much appreciated. To install, open up a document in TextMate and enter the following one line: curl "http://cloud.github.com/downloads/alkemist/interactive-input/tm_interactive… " -o "$TM_SUPPORT_PATH/lib/tm_interactive_input.dylib" With the caret on that line, press ⌃R to run the command. Interactive input will be reinstated and you don't need to restart TM. Please raise any issues on this list. LD.

15 years, 9 months

5
7
0 0

TextMate hangs on large files...

by Jim Leask

I have just discovered TextMate, and am so far very happy with it, but I think I just hit a glitch... I am trying to edit a SQL load file that is about 5M, which shouldn't be a problem. However, some of the lines are very long, as a complete website contents is in a single line. I have no idea how many characters are in this line, but I suspect about 2M worth. Anyway, TextMate hangs while trying to work with this file. I can't do much at all. Even a simple act of scrolling hangs. TextEdit does a reasonably good job with the file though... Actually, I don't think it is hanging, as it eventually responds (about 30 seconds later), but it is so slow that it is completely unusable. Is this a known problem? For me, it is weird files like this that we need an editor like TextMate to be able to easily handle. Thanks... Jim Leask

15 years, 9 months

3
3
0 0

PHP and HTML Syntax Coloring

by Ibrahim Ezzy

Hi, I'm sure this must've been asked a hundred times already, but I couldn't google a decent answer for this: How do I enable syntax color for HTML in a PHP file, or vice versa. If its a PHP file I'm working on, HTML turns grey. I'd greatly appreciate any help. Thanks!

15 years, 9 months

3
2
0 0

Problem running a simple Python script containing call to raw_input()

by Steve Copley

Hello I'm a bit stumped... I have a simple Python script containing a call to raw_input(). When I run the script with Cmd-R, the 'Running' window pops open, the script runs, but upon reaching the raw_input() call I'm not prompted for any user input. Instead the window displays an error: EOFError: 'EOF when reading a line' Running the script via the terminal works as expected: the script pauses for my input, then continues. Any ideas? I've googled about and only found one other reference to this error (on this very forum) but the issue was resolved with an update to TextMate. TextMate is up to date (1.5.9) Python Bundle is up to date (r11739) Thanks in advance Steve C. -- View this message in context: http://www.nabble.com/Problem-running-a-simple-Python-script-containing-cal… Sent from the textmate users mailing list archive at Nabble.com.

15 years, 9 months

3
6
0 0

Problem with the LaTeX Bundle

by os2hydrox

Hello together, i have some problems with the LaTeX-Bundle of TextMate. I got the following error message: File "/Users/sacher/Library/Application Support/TextMate/Bundles/Latex.tmbundle/Support/bin/texMate.py", line 54 print "Using Tiger Compatibility version of Popen class" ^ SyntaxError: invalid syntax I have tried to reinstall TextMate, to update the Bundle with the GetBundles-Bundle and from http://svn.textmate.org/trunk/. Nothing worked for me. I have installed the latest versions of: - Mac OS X 10.6 (Snow Leopard) - Textmate Version 1.5.9 (1510) - MacTeX 2008 - Python 3.1 (r31:73572) Thanks for your help. Oliver -- View this message in context: http://www.nabble.com/Problem-with-the-LaTeX-Bundle-tp25364171p25364171.html Sent from the textmate users mailing list archive at Nabble.com.

15 years, 9 months

2
2
0 0

Bundles written in PHP on Snow Leopard: Fix

by David Reese

Wanted to get this out there in case anyone else was having these issues. Snow Leopard changed my PHP configuration. (In fact, it might have come with no php.ini set up altogether... I've already forgotten.) The configuration killed any bundles that ran PHP code (like the wonderful but quirky FTP/SSH bundle), since it was not passing environment variables from Textmate to PHP. I was getting errors like: PHP Notice: Undefined index TM_PROJECT_FILEPATH PHP Notice: Undefined index TM_DIRECTORY etc. and FTP/SSH reported "Remote settings file not found", when really that was the least of its problems. The fix: * Make sure you have a file, /private/etc/php.ini -- you may have to copy or rename 'php.ini.default' * Search for the variables_order configuration line. It should be uncommented, and have an E in it, like this: variables_order = "GPCSE" That's it.

15 years, 9 months

1
0
0 0

I have a problem installing the textmate phpbundle

by Sebastian Bachmann

hello everyone, i have installed the phpbundle with svn co http://svn.textmate.org/trunk/Bundles/PHP.tmbundle in ~/Library/Application\ Support/TextMate/Bundles/ the problem is that the php bundle doesnt appear in the bundles menue[1]. but it is listed the bundles folder[2]. another problem is, when i start a new project and would like to add an file with a .php file extension i cant choose the .php file extension from the menue[3] i have reload the bundles with osascript -e 'tell app "TextMate" to reload bundles' hope that anyone can help me out. sorry for my bad english! regards, sebastian [1] http://img443.imageshack.us/img443/9637/bild1q.png [2] http://img159.imageshack.us/img159/4888/bild2y.png [3] http://img524.imageshack.us/img524/9931/bild3te.png --- () ascii ribbon campaign - against html mail /\ - against microsoft attachments

15 years, 9 months

2
1
0 0

TextMate Will Not Launch

by Postmaster

Hello, I have been using TextMate (licensed) for several years. A few days ago, I did the most recent update. Now, TextMate will not launch at all. I get a dialog box telling me TextMate is not supported on this architecture. But I have NOT upgraded to Snow Leopard, so I can't figure out why it is happening. I'm still running Leopard, version 10.5.8. Does anybody know what's wrong and how I can fix it? Thanks, Crystal

15 years, 9 months

4
5
0 0

Quoting Pattern in Latex-Bundle shown as invalid

by Niels Kobschätzki

Hi! I'm just working on some Tex-Document which uses several dialogues which I want to enclose in "< "> (the result are those << >>-enclosures in the document). Would be cool if that could be added to the language grammar. Thanks in advance Niels

15 years, 9 months

5
9
0 0

par in the Mail bundle

by Rob McBroom

It seems that the `par` binary included with the Mail bundle was compiled for PowerPC only. I don't have Rosetta installed, so I got a warning. Just an FYI. Maybe someone could scan the Support folder for all the current bundles to look for such binaries? -- Rob McBroom <http://www.skurfer.com/> If you need something, that doesn't mean someone else owes it to you.

15 years, 9 months

1
0
0 0

Source Code Indentation in LaTeX Bundle

by Sam Homer

Hi, I'm evaluating TextMate as a MacVim replacement for my LaTeX writing. What bugs me is that it does not seem to indent and hard wrap text automatically at all when editing existing paragraphs. MacVim does this very nicely when the appropriate "format-options" are turned on. I found this message regarding indentation: http://lists.macromates.com/textmate/2009-August/029269.html >> Is there a way to make the indentation continue on the second and >> third, etc. line of the \item? Something like this: > I assume you are asking for indented soft wrap, in which case the > answer is no. What would the answer be for indented *hard* wrap? What I would like is to be able to just remove some words of any indented line (e.g. within a \item line) and have TextMate continuously reflow and re-indent the text for me. - If I press backspace before the first non-white space character of a line, it should just jump back to the end of the previous line instead of removing the indentation tabs or spaces. - If I'm changing a line that begins with \item to \end{itemize}, it should automatically outdent to the correct indentation level. - etc. In other words, if at all, it should only be possible to change indentation manually using opt-tab and opt-shift-tab. For some limited time, I could maybe live with having to press a key to manually trigger the re-flowing and re-indenting process, but none of the provided commands seem to do much good in this case. I attached a macro I've developed that handles the latter (only soft tabs are supported); please let me know if there is an alternative way of achieving this. I wonder if any enhancement regarding automatic reflowing of hard wrapped text is planned for TM 2? Thanks, Sam

15 years, 9 months

1
1
0 0

Running programs that require input in TextMate

by Jonathan Elliott

This is probably a bit of a noobish question, but since most recently updating TextMate I've been having problems making programs which require input run correctly through TextMate. Before the recent update I had no problems. For example, if I write a simple C program such as the following (getchar.c): #include <stdio.h> int main() { printf("Please type a character:\n"); printf("You entered %c", getchar()); return 0; } and then hit Command-R to run the program, TextMate doesn't bother to ask me to type anything but just defaultly takes EOF as its input. Before updating, TextMate would come up with a dialogue box telling me that input was required, with the option to send EOF to the program, but this no longer happens. The above program runs fine in terminal, via "gcc getchar.c; ./getchar.c.out" for instance. The problem persists with other languages too, such as Ruby. Presumably there must be a simple way to fix it. Has a setting that tells TextMate what to take as STDIN been changed? Thanks in advance. -- View this message in context: http://www.nabble.com/Running-programs-that-require-input-in-TextMate-tp252… Sent from the textmate users mailing list archive at Nabble.com.

15 years, 10 months

2
1
0 0

princeXML, MMD and images and snow leopard

by Jeff Newman

I'm not sure if this is a textmate problem, but I don't seem to be able to generate a pdf with images using princeXML from a multimarkdown document anymore. The only real change in my system in snow leopard. Is anyone else having troubles with this? j.

15 years, 10 months

1
0
0 0

Custom language grammar deleted without confirmation ??!

by André Berg

Dear Users, Erm, I spent the better part of the last few hours working on a custom language grammar for assembly languages and then with just one keystroke the language definition was deleted without me being able to bring it back? How is it possible that when I do not have the focus on the text editing region of the language editor (mind you this can happen accidentally very quickly when you have to constantly close and reopen the dialog!) and I press backspace that my language definition is deleted without being asked if I really wanted to delete it? This is so incredibly fustrating. Do any of you know a trick how I can save any of it? Is there a cache somwhere or someting that I can exploit. I already checked the tmBundle and under the Syntaxes folder my definition is already gone :((( Please if you do know something.... it would be a shame if all this work would be lost. I really did not expect this behaviour. I otherwise love TextMate but this is a design flaw. I should at least be asked if I really wanted to delete the syntax file I have been editing the last few hours. Thanks for reading! André

15 years, 10 months

2
1
0 0

GetBundle show_bundles not working in SL?

by Joe Sheehan

I just upgraded to Snow Leopard over the weekend, and when re-installing all software, decided to use GetBundles to grab all of the bundles I'd been using. However, when trying to list everything on the repository, it doesn't seem to work for me. I went into show_bundles.rb, the support ruby script which is called when you "Show Bundles on Repository". I updated the website's hardcoded in that script to svn.textmate.org/trunk/Bundles, but no dice. I did notice the general note on TM/SL incompabitility with Ruby scripts due to 1.8.7, but I'm not a Ruby guy so I dont know the details. Is anyone else seeing the same thing? Much thanks Joe

15 years, 10 months

2
3
0 0

LaTeX bundle

by Yan Zhou

With SL upgrade, as discussed before there is problem with LaTex and other bundles don't work while the tm_interactive_input.dylib exists. I find another problem when I tried to configure the LaTeX bundle preference, it appears a tooltip says, /Library/Applications Support/TexMate/Bundles/LateX.tmbudle/Support/ bin/configure.py:8: DeprecationWaring: os.popen4 is deprecated. Use the subprocess module. sin,result = os.popen4(command) What is this?

15 years, 10 months

1
0
0 0

Newbie questions

by Mark Fletcher

Hi All, I downloaded TextMate today and am evaluating switching to it from Emacs. There are many things I like about it so far, but I have three questions. I code in C++. When I try to re-indent a selected chunk of code, using Text -> Indent Selection, it seems to do the wrong thing for any code that appears after comment lines. Am I doing it wrong? Also, is there any way to invoke Make from within TextMate. And finally, is there a gdb mode for debugging apps, like Emacs has? Thanks! Mark

15 years, 10 months

3
2
0 0

Remote code editing

by Scott Haneda

I have asked this before, and I can not find the post, or any notes or emails on it. When remotely editing code via for example, Interarchy, or any other ftp/ssh/sftp app, I can not get saving of code foldings. Is this supposed to work? I seem to recall back in the days of using BBEdit I would be able to tick off a "save state" and it would remember everything, from window position, line numbers on off, and a bunch of other things. Thanks. -- Scott * If you contact me off list replace talklists@ with scott@ *

15 years, 10 months

2
1
0 0

TM_INPUT_START_LINE_INDEX not always set?

by Gerd Knops

I have two bundle commands with identical input and scope settings. One of them sees the TM_INPUT_START_LINE_INDEX environment variable, the other does not. Any idea why that may be? Thanks Gerd

15 years, 10 months

2
3
0 0

sort files with non-latin characters

by Freek Dijkstra

Hi, I found a small bug. Since this is part of a bundle, the macromates website asked me to report it here. Summary: sort does not with euro symbol, and some other non-Latin characters. Steps to reproduce 1. Open new text file. 2. Add text with a EURO symbol, e.g. aaa € bbb ¥ ccc $ ddd £ 3. sort the file with F5 (Text > Sorting > Sort lines in document) I get the error: sort: string comparison failed: Illegal byte sequence sort: Set LC_ALL='C' to work around the problem. sort: The strings compared were `AAA \302\202\254' and `BBB ¥'. Most non-Latin characters work fine. Just this one fails. If I save the file and simply run "sort test.txt" all is fine. Both in my shell and in TextMate, "echo $LC_ALL" return "en_GB.UTF-8". Typing the following script in TextMate and "run script" works fine: echo "ccc\naaa€\nbbb" | sort What would be different for the "Sort lines in document" (which simply calls "sort") and the above script? Any clue? Is this reproducible by others? Regards, Freek Dijkstra

15 years, 10 months

3
2
0 0

File Open -- Cancel Command

by brad tittle

Hi, I have made the following blunder a couple of times. I go to open a file in textMate using File->Open and am in column view. I accidentally double click on the folder instead of single clicking. In list view or icon view this would just open the folder and go to the next level. In column view this actually opens the folder in textMate. If you are unfortunate enough to do this at low enough a level, textMate will then start scanning the entire folder hierarchy. I seem to remember seeing a command that would stop this process. I searched the archives of the list, but apparently I didn't on the right word choices. BTW. Part of the beauty of textMate is that it doesn't protect you from such blunders. My chain saw expects me to know not to run it while the chain is directed at my own leg. If I put a guard on the chain, it would make the tool REALLY hard to use. Currently I just force quit textMate and start over. I just wonder if there is a better way. Have a great day. -- Brad Tittle

15 years, 10 months

3
2
0 0

Subversion 1.6

by Fritz Anderson

I'm constrained to use Subversion 1.6.x, and this breaks the Subversion bundle I have. I did try checking out the current bundle into /Library/Application\ Support/TextMate/Bundles, but that seems not to have helped. Is there any relief for this? Either a new bundle or some Subversion properties I can set? I searched the Nabble archive for this list, and looked back a few months, but found nothing relevant. — F

15 years, 10 months

2
3
0 0

Edit in Textmate Snow Leopard Services/Context Menu Commands

by ells public

Attached are two services written to take advantage of Snow Leopard's context menu/automator integration. TxtToTM sends text selected in any application and opens a new TextMate window with that text inserted. There is a rudimentary heuristic set up to check if the text is Javascript/HTML/CSS/Applescript and set the textmate bundle type accordingly. This is implemented through an Applescript in Automator. So this can be extended/improved/hacked by the many textmate users who are, no doubt, more proficient in Applescript than me. Edit in Textmate will open any file or folder selected in Finder in Textmate. Folders open to Projects. These services show up when contextually appropriate (i.e. when you have text selected it will be in your right click menu). To install unzip, and put the two files in ~/Library/Services. You may need to go to System Preferences/Keyboard/Services and make sure the box next to each of them is checked for them to show up in your context menu. These are written using Automator's new Create Service function in Snow Leopard, so are 64 bit compatible. I have no idea if they would work in 10.5.

15 years, 10 months

2
1
0 0

Hmmm, 1509 or 1510?

by Nicholas Knight

Hi all, Is anyone else getting r1509 from the automatic updater (set to "minor updates"), but seeing 1510 on macromates.com? And it's not just a typo in the site, the build there really does have a revision number of 1510, but its changelog only shows to 1509. Slightly confused, -NK

15 years, 10 months

4
3
0 0

Textmate and Mecurial

by rgreen

I have setup textmate as the default editor in terminal. so, when I type 'hg commit' it opens textmate. I enter the message on the first line after the headers and hit save and close textmate and nothing happens. What am I doing wrong? -- View this message in context: http://www.nabble.com/Textmate-and-Mecurial-tp25216773p25216773.html Sent from the textmate users mailing list archive at Nabble.com.

15 years, 10 months

3
3
0 0

spaces and tabs and reformatting

by Scott Haneda

If I have for example this code: function foo() { var list = []; } Note there is 4 spaces indention. I work in 5 spaces soft tabs. If I move the cursor to just before the "v" in "var", and left arrow, I move to the left one space. Somehow, I need to reformat this code to be 5 spaces. Then when I move the arrow to the left, it moves 5 spaces, or one apparent tab stop. I have tried selecting the code, while I have my tabs set to 5, hard or soft, using reformat selection, in this case, in the JavaScript bundle area, or, convert spaces to tabs. Neither gets me where I need to be. I end up re-tabbing all the code, which is a tedious process. I I just add one space, or select the 4 spaces and replace with a tab, I get the functionality I want: function foo() { var list = []; } That example, the space before the "v" becomes a tab, either hard or soft. Thanks. -- Scott * If you contact me off list replace talklists@ with scott@ *

15 years, 10 months

2
2
0 0

Snow Leopard and master file issue

by Jerome Lefebvre

Hello, Thanks for posting how to fix all the other issues with Snow Leopard, but I haven't seen anything about master files in Latex mode. So, I have my latex file split up in several files and on top of each separate file I have; !TEX root = [...]thesis.tex And under Snow leopard, textmate seems to be ignoring that line (i.e. compiling with or without that line gives me the same error) Any idea about this issue? Thanks again, Jerome

15 years, 10 months

2
1
0 0

General things I should know, but don't

by Scott Haneda

I spent yesterday watching a handful of screencasts for learning jquery. I was shown perhaps 5 or more editors, and started to see value in workflows I am not able to replicate. I'm sure I'm just missing some prefs, pointers appreciated. Vertical grid on tab stops. How do I turn this on? Seeing where a statement begins and then closes at a glance is very powerful. In jquery with all the parens and brackets, this visual alignment would help a lot. I think this may not be possible. I figured I could get by with show invisibles. I'm not seeing tabs or spaces, just returns. I would also want to set returns and spaces to the same bg color to hide them. Too much noise. I tried multiple themes, I can not get invisibles to show other than returns, which I don't need to see anyway. Code reformatting. If I take any small chunk of jquery, select it, navigate to the bundle for JavaScript and tell it to reformat the code, it more or less reformats to a few lines. What am I doing wrong? Indenting. If sample code is copied in with say, 1 or 2 spaces used as indents, and I like to use 5 soft tabs, I'm finding no way to adjust that code to my tab stops. I end up retabbing it by hand. Next up would be where the open or close brace or paren is thought to be. I see I can get a blink on some parens but not others. What are the rules that define this blinking and can it be expanded? Also, the blinking is not quite enough for me. Having the actual open and close characters actively highlighted when your cursor is to the left or right, massively helpful to me. Current word highlighting. If a variable, class, method etc are clicked on, how can I get all occurances of that word also highlighted. Projects. I don't often get a chance to clone down an entire site and work locally. Is it correct there is no way to get a remote FTP based site to remember code folding or work in a project? I would be happy to figure out how to drag a window into a tab from a remote site, that would go a long ways. I don't always get ssh access, and I'm sure some will suggest expandrive. To be honest, I've tried it. There are too many reports of it failing on FTP to even list a directory. I worry it may delete remote files. I worked a little with the expandrive people, giving them access to an FTP server that matched the issues many others were reporting, currently still seeing broken behavior. I'm a little stubborn in that if I'm going to use a tool, I would want to use it everywhere, not just on ssh connections. Jumping from one toolset to another tends to take my brain too long to shift back into being productive. Saving. Is there a way to get save to have the entire filename selected? The trailing .html is something I'm always having to trim off. Usually I just command-A then start typing. Looking to save a step. Is there a way to select the current line only up to the first and last characters?like select word, but for a line. Is there a way to tell a line to best guess the correct indent level, and shove it in place? I have a feeling some of these issues have solutions and I just don't know where to look. Others i suspect I may be stuck on. Looking for any old hats that have been down this road before. Thanks. As a side note, watching some of these screencasts, I can certainly say, TM's features certainly should be adopted by other editors, I don't know how some people get by. If I had to put two items on a list, vertical tab grid lines and remote conection meta data saved would be pretty high up there. Thanks everyone. -- Scott Iphone says hello.

15 years, 10 months

4
6
0 0

Go to defenition..

by x00xer

Hi, I'm newbie with Textmate, but I like it very much :) very nice editor... but I could not find ine very helpful for me thing.. When I click (or select) some user function name (PHP), I want to see source it (i.e. defenition) How I could get it ? especially when declaration of this function in separate file.. Thanks. -- View this message in context: http://www.nabble.com/Go-to-defenition..-tp25151144p25151144.html Sent from the textmate users mailing list archive at Nabble.com.

15 years, 10 months

2
1
0 0

Latex and SL : Could not open to check for packages ????

by Alain Matthes

Hi, I install snow leopard (update) but now I can't compile LaTeX document with textMate I get : Could not open to check for packages This is most likely a problem with TM_LATEX_MASTER After installing snow, the symbolic link /usr/texbin is destroyed so cd /usr sudo ln -s ../Library/TeX/Distributions/.DefaultTeX/Contents/Programs/ i386 texbin Upgrading to Snow Leopard also remove /usr/texbin from my default PATH. I create a text file named TeX with contents /usr/texbin and then I move this file to /etc/paths.d. I give this file read-write permission for everyone Well now I can compile with TexShop and from the terminal but not with textmate I read some tickets on the net and after that, I rename tm_interactive_input.dylib in textmate.app and in the pristine copy, now I can compile but I would like to know if this solution is correct? Best Regards Alain Matthes

15 years, 10 months

2
4
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

TextMate