I spent yesterday watching a handful of screencasts for learning jquery. I was shown perhaps 5 or more editors, and started to see value in workflows I am not able to replicate.
I'm sure I'm just missing some prefs, pointers appreciated.
Vertical grid on tab stops. How do I turn this on? Seeing where a statement begins and then closes at a glance is very powerful. In jquery with all the parens and brackets, this visual alignment would help a lot.
I think this may not be possible. I figured I could get by with show invisibles. I'm not seeing tabs or spaces, just returns. I would also want to set returns and spaces to the same bg color to hide them. Too much noise.
I tried multiple themes, I can not get invisibles to show other than returns, which I don't need to see anyway.
Code reformatting. If I take any small chunk of jquery, select it, navigate to the bundle for JavaScript and tell it to reformat the code, it more or less reformats to a few lines. What am I doing wrong?
Indenting. If sample code is copied in with say, 1 or 2 spaces used as indents, and I like to use 5 soft tabs, I'm finding no way to adjust that code to my tab stops. I end up retabbing it by hand.
Next up would be where the open or close brace or paren is thought to be. I see I can get a blink on some parens but not others.
What are the rules that define this blinking and can it be expanded? Also, the blinking is not quite enough for me. Having the actual open and close characters actively highlighted when your cursor is to the left or right, massively helpful to me.
Current word highlighting. If a variable, class, method etc are clicked on, how can I get all occurances of that word also highlighted.
Projects. I don't often get a chance to clone down an entire site and work locally. Is it correct there is no way to get a remote FTP based site to remember code folding or work in a project?
I would be happy to figure out how to drag a window into a tab from a remote site, that would go a long ways.
I don't always get ssh access, and I'm sure some will suggest expandrive. To be honest, I've tried it. There are too many reports of it failing on FTP to even list a directory. I worry it may delete remote files. I worked a little with the expandrive people, giving them access to an FTP server that matched the issues many others were reporting, currently still seeing broken behavior.
I'm a little stubborn in that if I'm going to use a tool, I would want to use it everywhere, not just on ssh connections. Jumping from one toolset to another tends to take my brain too long to shift back into being productive.
Saving. Is there a way to get save to have the entire filename selected? The trailing .html is something I'm always having to trim off. Usually I just command-A then start typing. Looking to save a step.
Is there a way to select the current line only up to the first and last characters?like select word, but for a line.
Is there a way to tell a line to best guess the correct indent level, and shove it in place?
I have a feeling some of these issues have solutions and I just don't know where to look. Others i suspect I may be stuck on. Looking for any old hats that have been down this road before.
Thanks. As a side note, watching some of these screencasts, I can certainly say, TM's features certainly should be adopted by other editors, I don't know how some people get by.
If I had to put two items on a list, vertical tab grid lines and remote conection meta data saved would be pretty high up there.
Thanks everyone.
This does not work for me, I can not seem to get the left side to move the selection at all. I just end up chopping the last characters selection.
On Aug 28, 2009, at 11:28 AM, Björn Jadelius wrote:
Record a macro with:
- select line
- shift + right arrow
- shift + left arrow
- shift + left arrow
28/8 2009 kl. 19.51 skrev Scott Haneda:
Is there a way to select the current line only up to the first and last characters?like select word, but for a line.
I'm not sure I understand. Do you want to select the line except the newline?
Here is my recorded macro:
(open to install in in TextMate) I set the Key Equivalent to replace the current Select Line. (â§âL)
Hope this helps.
28/8 2009 kl. 23.16 Scott Haneda:
This does not work for me, I can not seem to get the left side to move the selection at all. I just end up chopping the last characters selection.
On Aug 28, 2009, at 11:28 AM, Björn Jadelius wrote:
Record a macro with:
- select line
- shift + right arrow
- shift + left arrow
- shift + left arrow
28/8 2009 kl. 19.51 Scott Haneda:
Is there a way to select the current line only up to the first and last characters?like select word, but for a line.
-- Scott * If you contact me off list replace talklists@ with scott@ *
textmate mailing list textmate@lists.macromates.com http://lists.macromates.com/listinfo/textmate
On Fri, Aug 28, 2009 at 10:51 AM, Scott Hanedatalklists@newgeo.com wrote:
I spent yesterday watching a handful of screencasts for learning jquery. I was shown perhaps 5 or more editors, and started to see value in workflows I am not able to replicate.
I'm sure I'm just missing some prefs, pointers appreciated.
Vertical grid on tab stops. How do I turn this on? Seeing where a statement begins and then closes at a glance is very powerful. In jquery with all the parens and brackets, this visual alignment would help a lot.
I think this may not be possible. I figured I could get by with show invisibles. I'm not seeing tabs or spaces, just returns. I would also want to set returns and spaces to the same bg color to hide them. Too much noise.
I tried multiple themes, I can not get invisibles to show other than returns, which I don't need to see anyway.
Using the twilight theme, I see tabs and returns. I'm guessing the reason you don't see tabs, is because you have soft tabs on (as you mention below), in which case the "tab" is five spaces as opposed to a tab, and thus not shown.
Code reformatting. If I take any small chunk of jquery, select it, navigate to the bundle for JavaScript and tell it to reformat the code, it more or less reformats to a few lines. What am I doing wrong?
Indenting. If sample code is copied in with say, 1 or 2 spaces used as indents, and I like to use 5 soft tabs, I'm finding no way to adjust that code to my tab stops. I end up retabbing it by hand.
Next up would be where the open or close brace or paren is thought to be. I see I can get a blink on some parens but not others.
What are the rules that define this blinking and can it be expanded? Also, the blinking is not quite enough for me. Having the actual open and close characters actively highlighted when your cursor is to the left or right, massively helpful to me.
Perhaps Edit > Select > Enclosing Brackets will do what you need. But, I agree more than a blink would be nice.
Current word highlighting. If a variable, class, method etc are clicked on, how can I get all occurances of that word also highlighted.
There was a thread about this in the last couple of days, take a peek at that.
Projects. I don't often get a chance to clone down an entire site and work locally. Is it correct there is no way to get a remote FTP based site to remember code folding or work in a project?
I would be happy to figure out how to drag a window into a tab from a remote site, that would go a long ways.
I don't always get ssh access, and I'm sure some will suggest expandrive. To be honest, I've tried it. There are too many reports of it failing on FTP to even list a directory. I worry it may delete remote files. I worked a little with the expandrive people, giving them access to an FTP server that matched the issues many others were reporting, currently still seeing broken behavior.
I'm a little stubborn in that if I'm going to use a tool, I would want to use it everywhere, not just on ssh connections. Jumping from one toolset to another tends to take my brain too long to shift back into being productive.
Saving. Is there a way to get save to have the entire filename selected? The trailing .html is something I'm always having to trim off. Usually I just command-A then start typing. Looking to save a step.
Is there a way to select the current line only up to the first and last characters?like select word, but for a line.
Shift-cmd-l gets the line (as well as the trailing newline), to get it w/o the new line you could record a macro.
Is there a way to tell a line to best guess the correct indent level, and shove it in place?
I have a feeling some of these issues have solutions and I just don't know where to look. Others i suspect I may be stuck on. Looking for any old hats that have been down this road before.
Thanks. As a side note, watching some of these screencasts, I can certainly say, TM's features certainly should be adopted by other editors, I don't know how some people get by.
If I had to put two items on a list, vertical tab grid lines and remote conection meta data saved would be pretty high up there.
Thanks everyone.
Scott Iphone says hello.
textmate mailing list textmate@lists.macromates.com http://lists.macromates.com/listinfo/textmate
--- The possession of knowledge does not kill the sense of wonder and mystery. There is always more mystery. - Anais Nin
On Aug 28, 2009, at 10:51 AM, Scott Haneda wrote:
I spent yesterday watching a handful of screencasts for learning jquery. I was shown perhaps 5 or more editors, and started to see value in workflows I am not able to replicate.
I'm sure I'm just missing some prefs, pointers appreciated.
Vertical grid on tab stops. How do I turn this on? Seeing where a statement begins and then closes at a glance is very powerful. In jquery with all the parens and brackets, this visual alignment would help a lot.
I think this may not be possible. I figured I could get by with show invisibles. I'm not seeing tabs or spaces, just returns. I would also want to set returns and spaces to the same bg color to hide them. Too much noise.
I tried multiple themes, I can not get invisibles to show other than returns, which I don't need to see anyway.
I remember a theme that had this displayed by shading the alternating tab stops, but I can't seem to find it now. Funny, I'd forgotten about it until you mentioned it -- I could really use it at the moment!
-k-
On Aug 28, 2009, at 11:43 AM, Kerri Miller wrote:
On Aug 28, 2009, at 10:51 AM, Scott Haneda wrote:
I spent yesterday watching a handful of screencasts for learning jquery. I was shown perhaps 5 or more editors, and started to see value in workflows I am not able to replicate.
I'm sure I'm just missing some prefs, pointers appreciated.
Vertical grid on tab stops. How do I turn this on? Seeing where a statement begins and then closes at a glance is very powerful. In jquery with all the parens and brackets, this visual alignment would help a lot.
I think this may not be possible. I figured I could get by with show invisibles. I'm not seeing tabs or spaces, just returns. I would also want to set returns and spaces to the same bg color to hide them. Too much noise.
I tried multiple themes, I can not get invisibles to show other than returns, which I don't need to see anyway.
I remember a theme that had this displayed by shading the alternating tab stops, but I can't seem to find it now. Funny, I'd forgotten about it until you mentioned it -- I could really use it at the moment!
Can anyone else chime in? This would be wonderful to know how to do. I suppose I am not going to be able to use soft tabs of I want this feature though?
I have grown to really like soft tabs to be honest. Never thought I would, but it is pretty nice to move files around to a different editor and everything looks just how I had it.
-
Björn Jadelius -
Kerri Miller -
Peter Cowan -
Scott Haneda