- TextMate - lists.macromates.com

by Alain Matthes

Hello, First question : I use with some latex document, the command "Create Html from Document" of the Bundle TexMate. I would like to extract only the code between <pre> and </pre>, directly How I can to do that ? Second question : When I fold the code between <pre> and </pre>, the result is ten lines of code, how to have only the first line? Best regards Alain

15 years, 1 month

1
0
0 0

replacing tabs with spaces in selected area

by Mojca Miklavec

Hello, I'm looking for a trick that would help me replace tabs by spaces in selected area. I have source code that looks approximately like this: <tab><tab>short<tab><tab><tab><tab>a; <tab><tab>unsigned long<tab>b; <tab><tab>int<tab><tab><tab><tab><tab>c; which is only aligned when some specific size of tab is chosen. I would like to keep the first two tabs (to preserve nice alignment), but replace the tabs between "short" and "a", so that the text would be aligned under any tabulator width setting. I cannot use just "Search & Replace" because the first tab has variable width (depending on its starting position). If there is no out-of-the-box solution, I know some ruby, so I could write a program that would perform the task for me, but I'm not sure how to pass the following information from TextMate to my script: - at which column does my selection start (I would like to "alt"-select a "box") - how wide is the current tab But I hope that there exists an easier solution. Thank you very much for any hint ... Mojca

15 years, 1 month

2
2
0 0

Re: replacing tabs with spaces in selected area & RE: How to change <form> tag coloring?

by Brandon M Fryslie

RE: replacing tabs with spaces in selected area You can use regular expressions in search and replace to do what you want, but there is also a built in command. Click 'Text' on the menu bar, then under 'Convert' click Tabs to Spaces. It will only convert the tabs in the current selection. Hold the option key while selecting to select a box rather than the entire lines. RE: How to change <form> tag coloring? This is actually very easy (in theory), I'm surprised more people don't know how TextMate works. I'll tell you the steps to add a scope called meta.tag.block.form.html to your html language bundle which can be styled individually. Note: this only adds a scope to the tag itself. The 'block' part of the language file must be modified in a similar way to style the block. Open the bundle editor, go to the html bundle, then go to the HTML language file. Find the block within the patterns section that starts { name = 'meta.tag.block.any.html';. Select that entire block (from { to }, ) and duplicate it. Of those two identical blocks, you will be editing the one that appears closer to the top of the file. Change meta.tag.block.any.html to meta.tag.block.form.html. Now change the line that starts 'begin' = ... to begin = '(</?)((?i:form)\b)'; Done! Open an html file and press shift+control+p in some different tags and you should see the change in scope from any.html to form.html. I added a style to my theme for meta.tag.block.form.html and it only styles the form tags. You will have to play with it to get it exactly how you want, but I hope this gives you enough info to get started. <3 TextMate Brandon

15 years, 1 month

1
0
0 0

Re-open last closed tab

by Guoliang Cao

Hi, Does TextMate support re-open last closed tab? If not, what is the simplest approach to implement it? Thank you. Guoliang

15 years, 1 month

2
2
0 0

How to change <form> tag coloring?

by commonmind

I've searched the forums and read as much of the documentation as I could, and I cannot find a straight-forward answer to my question. I'm trying to color specific tags and elements associated with those tags. Using <form></form> tags as an example: I'd like to color these tags and all the elements within them a bright yellow. Any help would be greatly appreciated. -- View this message in context: http://old.nabble.com/How-to-change-%3Cform%3E-tag-coloring--tp30747855p307… Sent from the textmate users mailing list archive at Nabble.com.

15 years, 1 month

5
8
0 0

latex/ghostscript eps error

by Jim McLoughlin

Hi folks, I've got a latex article, me.tex, that includes a graphic mefig.eps. If I compile via the command line: pdflatex mefig.eps the compilation process uses Ghostscript to create an intermediary file mefig-eps-converted-to.pdf and generates me.pdf with no errors. When I compile from TextMate (whether I use pdflatex or latexmk.pl doesn't matter), I get an error: ------------ !!! Error: Cannot open Ghostscript for piped input Latex Error: ./epstest.tex:14 Package pdftex.def Error: File `breakevenb1-eps-converted-to.pdf' not found. --------------- I am using the latest version of TextMate (with the default Latex bundle) and TexLive 2010 (I actually uninstalled my TextMate and re-installed from scratch to make sure it wasn't a config quirk on my end). Any ideas here? Shouldn't TextMate simply be issuing the command "pdflatex my.tex", which work from Terminal? Thanks, Jim

15 years, 1 month

2
2
0 0

How does the QuickTime embed thing work?

by Walter Lee Davis

I have always been able to drag and drop a QuickTime movie into an HTML page and the requisite object/embed/ActiveX tag structure is automagically built. Now, on my new MacBook Pro Snow Leopard, in a user account I built using the Apple Migration Assistant from a Leopard MacBook Pro, this no longer works. I get a cryptic error pasted into the current document instead of my code. How is this supposed to work, so I can understand where to start poking around? Does it rely on QuickTime 7 Pro being installed? Thanks in advance, Walter

15 years, 1 month

4
6
0 0

Re: Terminal from within textmate (DTerm)

by Brandon M Fryslie

@Alexey That is really awesome! I will definitely check it out and play around with it. Here is what I use in Visor to achieve a similar functionality. Depending on your usage, it may be better to use DTerm but I figured these might help someone out since they work for regular Terminal as well. I map these to various keyboard shortcuts such as Command+Shift+C or Control+Shift+C with Quicksilver. Applescript to copy the containing folder of the current finder selection to the clipboard: *tell* *application* "Finder" *if* selection *is* *not* {} *then* *set the clipboard to* POSIX path *of* ( *container* *of* (*first* *item* *of* (selection *as* *list*) *as* *alias*) *as* *alias*) *end* *tell* * * Path of the Selection to the clipboard: *tell* *application* "Finder" *if* selection *is* *not* {} *then* *set the clipboard to* POSIX path *of* ( *first* *item* *of* (selection *as* *list*) *as* *alias*) *end* *tell* * * Tell Terminal to go to the current finder directory ( *tell* *application* "Finder" *if* selection *is* *not* {} *then* *set* path_ *to* POSIX path *of* (*container* *of* (*first* *item* *of* ( selection *as* *list*) *as* *alias*) *as* *alias*) *tell* *application* "Visor" *do script* with command "cd \"" & path_ & "\"" in *window* 1 *activate* *end* *tell* *end* *if* *end* *tell* * * I believe these can be modified relatively easily to use the current file in any application if you need to do that a lot. I am definitely going to check out DTerm and see how it integrates into my normal terminal workflow. Thanks for the info!! Brandon

15 years, 1 month

1
0
0 0

pgEdit - new bundle for PostgreSQL

by John DeSoi

pgEdit supports PostgreSQL specific syntax coloring (e.g. dollar quoting), SQL execution, context specific help, completion, and recognition of SQL language constructs (tables, functions, triggers, etc.). pgEdit uses psql for executing SQL and takes advantage of many psql features. See the "pgEdit Help" command for more details. If you are interested in PostgreSQL, please give it a try and send me your feedback. http://pgedit.com/public/beta/pgEdit_TextMate_2.0b1.zip John DeSoi, Ph.D.

15 years, 1 month

1
0
0 0

Re: Terminal from within textmate?

by Brandon M Fryslie

I use the program Visor to give me access to a terminal from any program. I press 'Control' twice and it slides down from the top. It is about as fast quicksilver to run a command from any window. Here is the main site: http://visor.binaryage.com/ Here are some instructions for improving it: http://tech.xster.net/tips/the-perfect-visor-reborn/ However, I personally do not like making it an LSUIElement because long story short I can't figure out how to change the transparency with a keyboard shortcut. Instead, I use DragThing and exclude Visor from the dock and application switcher. I can't recommend this program enough. I can't live without it since I use the terminal constantly and this gives me the ability to use bash aliases and scripts as fast as I can access a quicksilver catalog item. Also, DragThing. Stupid name, but it replaces your boring normal dock with as many themed and tabbed docks as you have crap to shove on them. It is also a more versatile and better application switcher than either Witch or LiteSwitchX. Brandon

15 years, 1 month

5
6
0 0

Escape key non-functional only in TextMate?

by Brandon M Fryslie

My escape key seems to have quit working in TextMate, but only TextMate (out of the programs I've test it with). Here are the essential facts of the situation: My escape key does not work for completions, and in addition it does not work for exiting dialog boxes. When I press Control+Command+T (Select Bundle Item) and change the setting to find by key equivalent, the key entity DOES show up in the window. There are no bundles mapped to escape alone, but Option+Escape for HTML completion also doesn't work, and appears when I enter Option+Escape in the Select Bundle Item window. The escape key DOES work in every other program, included for completions in CSS Edit, and dialogs in Forklift, CSS Edit, Chrome, Firefox, System Preferences, Terminal, and various other things I had open. Escape works properly in Terminal to display a list of completions. Escape also works in the programs Key Codes, Full Key Codes, and KeyDump*, each of which print information about key presses. *http://pqrs.org/macosx/keyremap4macbook/ I use KeyRemap4Macbook, but have not done anything with escape. The key worked for a long time with KeyRemap installed, and uninstalling it doesn't seem to affect the issue. So in short, it's only TextMate having an issue, and it does seem to be receiving the keypress (in the Select Bundle Window). It doesn't seem like it is being intercepted upstream, and I never map anything to escape in any other programs. I'm stumped. Anyone else have an idea? Or an idea of why it would affect TextMate only?

15 years, 1 month

1
0
0 0

Terminal from within textmate?

by Mikael Henriksson

The thing I hate the most about the otherwise great app is the possibility to run terminal (rails) commands from within Textmate. Is that at all possible? It would save me loads of confusion switching between windows. Mikael Henriksson Tel: +46 (0) 730- 393 200 mikael(a)zoolutions.se

15 years, 1 month

3
3
0 0

keyboard input

by André de Boer

Hi, I am using textmate on Mac OS X (version 10.6.6). How can I configurate textmate so that keyboard input possible is. Thanks for the reaction, André (newbie to textmate)

15 years, 1 month

3
2
0 0

Can't enlarge text

by Myles Recny

Hi all - I'm a textmate newbie and finding that I can't change font size using cmd + / cdm -. I've attached an image of the error message that I get when I try to enlarge text. Am I missing a TM dependency, perhaps xcode? Best -- M

15 years, 1 month

2
1
0 0

Re: Best iPad Text Editor for Textmate Users

by Owen Densmore

> You didn't mention what sort of stuff you would be writing. But for simple note taking I like PlainText: > > http://www.hogbaysoftware.com/products/plaintext > > It syncs with Dropbox and creates plain text files that can be edited in TextMate. Mainly note taking, although the files have gotten rather large .. need to toss the cruft! The high order bit is that the editor work well with textmate. I think that means utf8 & LF and no hidden metadata. So I'll give PlainText a shot. While looking at the iPad text editors, I saw Markdown mentioned. I hadn't really considered it before, but it looks like a nice way to structure text files with the least intrusion possible. I may give it a shot, and I noticed TextMate has a plugin. -- Owen

15 years, 1 month

6
8
0 0

Unable to open makefile in folder view

by Alex Smith

I'm using the latest (minor) update - ver. 1.5.10 (1623) and I'm unable to view and edit a makefile unless I open it independently of my project/folder files. I'm not certain when this ability was broken as I haven't been coding too recently... I'm currently just moving between .c/.h files and a makefile at the moment.

15 years, 1 month

2
1
0 0

Latex Bundle: "Citation Based on Current Word / Selection…" with multiple Bib Files?

by Sebastian Reiter

15 years, 1 month

1
0
0 0

Enabling syntax highlighting

by Michael Muratet

Greetings I have installed the two R bundles (Rapp and Rconsole) but I cannot get the syntax highlighting to work. I made sure that the filetypes field in the language grammar has 'R' and 'r' in addition to the 'Rcon' it already had. Still, highlighting does not work. Can anyone offer any suggestions? Thanks Mike

15 years, 1 month

2
2
0 0

Select line shortcut broken

by Chris Fonnesbeck

I seem to have lost the super-useful select line shortcut (shift-cmd-L). I notice that the shortcut does not appear alongside the menu item for select line either. Any idea why this has happened, and more importantly, how to restore it? Thanks, cf

15 years, 1 month

2
1
0 0

Running Scheme / Racket in TM

by Quine

Hi, I've installed Racket from the official page and I have the racket bundle. After some mucking about with the path and setting TM_SCHEME_INTERPRETER the run command stopped erroring in executor and *seems* to run. However, its output is set to show as tooltip and prints out a bunch of html, so I changed that to show as html to get the usual output window. Unfortunately there's no output. I ran racket < file.scm in terminal and that produced the correct output on stdout, which as far as I know is what it should do for executor to work with it. Anyone know how to get this working? Thanks Quine

15 years, 1 month

1
0
0 0

Can I hide .txt extension in TextMate?

by Owen Densmore

I generally do not use the .txt extension .. presuming it to be text. This is likely a Bad Habit due to README's, shell scripts, and notes etc but seems relatively harmless. But recently I've started using things like Dropbox and other internet facilities that really get upset about this. (BTW: I'd love a good iPad text editor .. any good ideas?) So it seems I'll have to start adding the .txt extension, sigh. One annoyance in textmate is that this makes the tabs larger and hang off the end. So I guess there really are two questions: - Specifically: Is there a way to have textmate not show the extensions? - Generally: Am I right that I'm doomed to .txt usage? -- Owen

15 years, 1 month

10
11
0 0

TM lags when switching

by Scott Haneda

I am pretty sure I just pinned this down to TM. If I work in TM, save, then command-tab to a browser, there is significant lag from the time it will switch to the browser, or, at times, even bring up the application tab switcher. If I do not save, the toggle is fast, so it seems to be something to do with leaving TM, where it is not letting me leave as fast as other apps do. I have tried toggling back and forth between other apps, and the behavior is speedy. Any idea what is going on, and how to solve it? These are simple files, single files, that have a hundred lines or so in them, nothing complicated at all. -- Scott * If you contact me off list replace talklists@ with scott@ *

15 years, 1 month

7
19
0 0

TM 1.5.10 won't run on OSX 10.6.6

by erik scheirer

I updated OSX to 10.6.6 and now textmate won't start at all. I start it from the dock, it just bounces and stops. Starting from command line, like 'mate .' it just sits there and does nothing, no error output, nothing. Nothing in the Console app either. It was all working fine before I did the osx 10.6.6 update last weekend. Have anyone else had this problem, and what did you do to fix it? cheers, e

15 years, 1 month

5
6
0 0

Best iPad Text Editor for Textmate Users

by Owen Densmore

I'm looking at the many iPad text editors and wonder which would work best with textmate. I would prefer also to use Dropbox, so compatibility with DB would be a plus. I currently use Textmate + Dropbox across a mini and a MBP and the sync feature is really nice. Problems with iPad that I've seen discussed is that they may force CR/LF, or do not handle UTF-8 correctly (scrambling characters), or match Windows users better than Mac. So I thought I'd see if any of of us textmate folk have found a good match. -- Owen

15 years, 1 month

4
3
0 0

parameter to jump from error console in Firefox to referenced line of code in TM

by Steve

Hi, I'm trying to get TM to work with the viewsourcewith addon for Firefox (found here https://addons.mozilla.org/en-US/firefox/addon/394/ ) . I have mate installed at /usr/local/bin/mate . I'd like to be able to jump from the Firefox error console to the correct line in my open TM document. The viewsourcewith addon asks for the path and parameter. I've given my path as /usr/local/bin/mate and the parameter as $f . This indeed opens TM, but it does not take me to the line referenced in the error console. Suggestions would be appreciated. Thanx.

15 years, 1 month

2
1
0 0

Executing a file based on manipulating TM_PROJECT_DIRECTORY in Make->Run bundle

by Stefan Wessels

Hi, I am trying to change the "Make" Bundle's "Run" command. I create projects in folders and I want to execute an executable (in my case, I am writing apps with the extension .prg for a Commodore 64 to be run inside an emulator). Currently, I am using a line like this: open "$TM_PROJECT_DIRECTORY/myapp.prg" The problem is I don't want the apps to all be called myapp.prg. What I would like is something more like: open "$TM_PROJECT_DIRECTORY".sub( /(.*)?\/(.*)$/, "\1/\2\2.prg" ) (I don't actually know Ruby but I used an online ruby regex explorer). Translated, this means that I want to use the last component of TM_PROJECT_DIRECTORY as the filename, appended to the directory and then append .prg to the end of that. I tried the code below: ----------- #!/usr/bin/env ruby require ENV["TM_SUPPORT_PATH"] + "/lib/tm/executor" TM_RUN = "open "+ENV['TM_PROJECT_DIRECTORY'].gsub( /(.*)?\/(.*)$/, "\1/\2/\2.prg" ) flags = "" Dir.chdir(File.dirname(ENV["TM_PROJECT_DIRECTORY"])) TextMate::Executor.run(TM_RUN, flags, :verb => "Running") do |line, type| end ----------- This didn't work. 2 Things are wrong. 1) the regex replace didn't work - I am guessing that the return from ENV[] isn't something you can call .sub on? -- and 2) the Executor.run says it wants the path added to the path variable (I know that by feeding it a hard-coded line to an existing .prg file). Can someone maybe help me figure out how to make this go? Thank you Stefan -- View this message in context: http://old.nabble.com/Executing-a-file-based-on-manipulating-TM_PROJECT_DIR… Sent from the textmate users mailing list archive at Nabble.com.

15 years, 1 month

1
0
0 0

My Path Issue (I think) with New Latex Bundle

by Charles Turner

Hi all- Having trouble running the "new" TextMate bundle with a LaTeX file that worked via the old (or current, stable) bundle and (now) works on the command line. Here's a bit of the log: > This is pdfTeX, Version 3.1415926-1.40.10 (TeX Live 2009) (format=pdflatex 2009.11.7) 6 AUG 2010 11:43 > entering extended mode > file:line:error style messages enabled. > **"/Users/cturner/Documents/BIZ/Personal/Resume, etc./Resume-2009/resume20090628.tex" > (/Users/cturner/Documents/BIZ/Personal/Resume, etc./Resume-2009/resume20090628.tex > LaTeX2e <2009/09/24> > > [clip...] > > Package: ifxetex 2009/01/23 v0.5 Provides ifxetex conditional > ) > /usr/local/texlive/2009/texmf-dist/tex/xelatex/fontspec/fontspec.sty:18: > ******************************************** > * XeTeX is required to compile this document. > * Sorry! > ********************************************. > \RequireXeTeX ...********************************} My document uses XeLaTex and has this as its first line: > %!TEX TS-program = xelatex So I imagine my problem is that XeLaTeX isn't getting run. My default engine in Preferences is "xelatex" so, being a noobie, I'm not sure what else to do to tell the bundle my desires. Any help greatly appreciated! Best wishes, Charles

15 years, 1 month

3
4
0 0

Some Joker has registered Textmate2.com

by Walter Lee Davis

And posted a proxy of the Emacs site there... http://textmate2.com/ Trademark lawsuit, anyone? Walter

15 years, 1 month

6
5
0 0

Snippet Braces Matching Problem

by Phil Molyneux

I have the following snippet where the tab $1 is intended to match the whole string (to be used in LaTeX) ${1:\NMsubject{\textbf{${2:Subject}}}} However the tab $1 does not match the last two braces - I suspect this is an issue with the LaTeX and TextMate use of braces. The snippet below works as expected (but would be no use in LaTeX ${3:someText|someMoreText|${4:Subject}||} Is there some way to get $1 above to match to the last brace ? Phil

15 years, 1 month

2
1
0 0

Difficulty using TextMate as external editor

by Ian Greig

I'm a new user and I don't have a Unix background, so I am struggling with Section 21.1. in the manual. I am attempting to use TextMate as an external editor. 1. It works fine with my various Cocoa apps, with the shortcut showing up in the Edit menu. No problems here. 2. I need to use TextMate with Tinderbox (a non Cocoa app). Users on the Tinderbox forum have various ways of doing this, either using the "mate" command in Terminal, or using a variety of ways of calling this command. However, my problem is that I cannot get commands via terminal to import text, or save it back. "mate -h" does bring up a menu of commands, so that much is working. Quite likely, this is owing to my lack of experience with the command line. I have read and re-read section 21.1. but it assumes a familiarity with Unix and CL operation which is new ground to me. I would really appreciate a *simple*, assuming-nothing, explanation of what I need to do to copy contents of a window from my non-Cocoa app (Tinderbox) into TextMate, and then back again -- presumably using some variant of the "mate" command via Terminal. -- View this message in context: http://old.nabble.com/Difficulty-using-TextMate-as-external-editor-tp305546… Sent from the textmate users mailing list archive at Nabble.com.

15 years, 1 month

5
7
0 0

JavaScript Bundle and formating

by Matthias Luebken

Hi I like to format my JavaScript / Node files. As far as I can see this seems to be the latest bundle: https://github.com/subtleGradient/javascript-tools.tmbundle The Format Javascript.tmMacro is from 2007 and still says Alpha in the menu. Now I am wandering if there is something more uptodate. I especially don't like the new lines with every opening curly brace. Any suggestions? Matthias -- View this message in context: http://old.nabble.com/JavaScript-Bundle-and-formating-tp30605821p30605821.h… Sent from the textmate users mailing list archive at Nabble.com.

15 years, 1 month

1
0
0 0

PERL won't read <STDIN> anymore

by Mark Jackson

I am using TextMate 1623. I have just gone back to learning PERL and I am now unable to ask for info (<STDIN>). I have scripts that worked previously, and now fail. All of the scripts work on the command line. Any ideas?

15 years, 1 month

1
1
0 0

Re: Sweave bundle feature request

by T. Zakharko

T. Zakharko wrote: > > Dear all, > > I post this here because I am unsure of who is the current maintainer of > the Sweave bundle. The help files list Alan Schussman as author, but as > the bundle has last been updated in 2006 I have no idea if he is still > responsible for it. > > To make the story short: it is sometimes desirable to run Sweave with a > custom driver. I need it for literate programming documentation style > where I want Sweave to skip the code parsing to allow for chunks > containing incomplete R expressions (and I also developed a very simple > driver that does just that). A probably more common usage would be > invoking the pgfSweave driver instead of the vanilla one. > > An option like > > %!TEX SWeave= my_driver > > would be very nice. I can hack something like this together on my own, but > this is a feature which should probably be added to the official > distribution. > > Thank you, > > -- Taras > P.S. I have patched the Sweave bundle's 'Sweave,Typeset and View' command with following: # get the Sweave driver option DRIVER=`grep -e '^%!TEX Sweave' "$TM_FILEPATH" | sed 's/.*=//g'` SW=${TM_SWEAVE_WD:=${TM_DIRECTORY}} if [ -n "$DRIVER" ]; then echo -e "setwd('$SW')\nSweave('$TM_FILEPATH', driver=$DRIVER)" | R --no-restore --no-save --quiet | pre else echo -e "setwd('$SW')\nSweave('$TM_FILEPATH')" | R --no-restore --no-save --quiet | pre fi This replaces the previous R invocation and works reasonably well. Usage is: %!TEX Sweave= my_driver Maybe someone could patch it to the official repo... -- View this message in context: http://old.nabble.com/Sweave-bundle-feature-request-tp30588762p30594043.html Sent from the textmate users mailing list archive at Nabble.com.

15 years, 1 month

1
0
0 0

TextMate becoming increasingly unstable

by Max Lein

I have noticed that especially after upgrading to 10.6, TextMate has become more and more crash prone -- especially after switching from another app back to TextMate. I use it mainly in larger LaTeX projects in conjunction with git and nowadays it would crash, two, three times a week. I often switch back and forth between Skim or Preview and Textmate. Hence, I mostly don't lose any data, because I've saved the file before switching apps, but nevertheless, it's quite disconcerting. Back in the (good old ;-) 10.4 days, TextMate was absolutely rock solid and it was exceedingly rare for TextMate to crash. Are those known issues? Will there be more fixes down the road for 1.5 addresses stability problems? What are the root causes?

15 years, 2 months

9
16
0 0

Running cucumber features with cmd+R?

by Mikael Henriksson

Hi, I try to run a feature with cmd+R and it gives me the following message: :29:in `require': no such file to load -- spec (LoadError) from :29:in `require' from /Users/mhenrixon/Library/Application Support/TextMate/Bundles/Cucumber.tmbundle/Support/lib/cucumber/mate.rb:23:in `' from :29:in `require' from :29:in `require' from /Users/mhenrixon/Library/Application Support/TextMate/Bundles/Cucumber.tmbundle/Support/lib/cucumber/mate/feature_helper.rb:1:in `' from :29:in `require' from :29:in `require' from /tmp/cucumber-19009.rb:2:in `' The RSpec specs work fine it's just my features that don't run. I hate having to switch to console to do this. Any suggestions? Mikael Henriksson Tel: +46 (0) 730- 393 200 mikael(a)zoolutions.se

15 years, 2 months

2
4
0 0

Python bundle doesn't see modules

by michal owsiak

Hi there, I have Python related issue within TextMate. I am trying to start Python script directly from TextMate, but it fails. Here comes the output from Terminal: michalo:/Users/michalo/test> python simple.py One Two michalo:/Users/michalo/test> cat simple.py #!/usr/bin/python import xml.etree.ElementTree as ET def main(): element = ET.XML("<root><child>One</child><child>Two</child></root>") for subelement in element: print subelement.text if __name__ == "__main__": # Someone is launching this directly main() michalo:/Users/michalo/test> python simple.py One Two michalo:/Users/michalo/test> python --version Python 2.6.1 However, if I use Python bundle to start this script directly from the TextMate (Bundles -> Python -> Run script) I get following error: ImportError: 'No module named etree.ElementTree' module body in xml.py at line 3 import xml.etree.ElementTree as ET copy output Program exited with code #1 after 0.19 seconds. If I start it from TextMate Bundles -> Python -> Run script (Terminal)), I am getting following error: Traceback (most recent call last): File "/Users/michalo/Documents/work_files/public/notes/python/xml.py", line 3, in <module> import xml.etree.ElementTree as ET File "/Users/michalo/Documents/work_files/public/notes/python/xml.py", line 3, in <module> import xml.etree.ElementTree as ET ImportError: No module named etree.ElementTree michalo:/Users/michalo/Documents/work_files/public/notes/python> Do you know what can be the source of the issue? That's what I get from the Terminal windows (when I try to get Python version): michalo:/Users/michalo/test> which python /usr/bin/python michalo:/Users/michalo/test> python --version Python 2.6.1 michalo:/Users/michalo/test> And you can find attached screen shoot from text mate. I have created simple text file: which python python --version And executed it with: Bundles -> Shell Scripts -> Run script Does anyone have an idea what's wrong here? Cheers Michal

15 years, 2 months

3
2
0 0

git not found

by Lewis Overton

A recent attempt to update bundles returned "sh: git: command not found" But in terminal, I see bash-$ git --version git version 1.7.3.1 which is something new. What's happening? I'm running TM Version 1.5.10 (1623) Model Identifier: MacBook5,1 Processor Name: Intel Core 2 Duo Processor Speed: 2.4 GHz with OS X 10.6.5

15 years, 2 months

6
11
0 0

CR added to Selected Find

by Ed Wong

Something odd has happened to Find in the latest build. When I selected a word and hit Cmd-E (Use Selection for Find) it appends a carriage return to the word. I can see this when I open the Find dialog. Any idea what is happening? Ed

15 years, 2 months

3
5
0 0

RVM, Ruby, Textmate and me?

by Shane Knysh

Greetings, I recently set up a new system with RVM and ruby 1.9.2 (default) as well as 1.8.7 and Rubinius. The system ruby is currently 1.8.7. I followed the instructions here: http://rvm.beginrescueend.com/integration/textmate/ to set up RVM and textmate to work and play nice together. These steps work and don't. When I use the run command textmate execute the file using the correct ruby, for example the "puts RUBY_DESCRIPTION" returns the expected ruby 1.9.2. However, when I "Execute line/ selection as ruby" I still get ruby 1.8.7 (the system ruby). Looking at the bundles the "Execute line/ selection as ruby" command starts with "#!/usr/bin/env ruby" How should I modify the bundles such that it run the selection or line via the TM_RUBY environment variable rather than the system ruby? Thanks! Shane http://scr.im/shaneknysh

15 years, 2 months

4
3
0 0

ignore ".dSYM" folders?

by Aaron Smith

Hey Everyone, How can I ignore .dSYM folders? I've been fiddling with this for like an hour now and can't get the regular expression right in preferences. It's probably the most obvious thing in the world but it's eluding me. This is my current folder ignore pattern !.*/(\.[^/]*|CVS|_darcs|_MTN|\{arch\}|blib|.*~\.nib|.*\.(framework|app|pbproj|pbxproj|xcode(proj)?|bundle))$ I've tried adding |\.dSYM like this: !.*/(\.[^/]*|CVS|_darcs|_MTN|\{arch\}|blib|.*~\.nib|.*\.(framework|app|pbproj|pbxproj|xcode(proj)?|bundle)|\.dSYM)$ And a couple other variations, but with no luck Thanks for any help!

15 years, 2 months

2
1
0 0

Re: git not found

by Joshua Kehn

I'm having similar issues with GetBundles, not git related (or so it appears). Minimalistic log message: 01/02/2011 13:56:32 TextMate[GetBundles] Installing “Haskell” 01/02/2011 13:56:32 TextMate[GetBundles] Could not install “Haskell” by using “https://github.com/textmate/haskell.tmbundle/tarball/master” 01/02/2011 13:56:57 TextMate[GetBundles] Installing “Closure Compiler” 01/02/2011 13:56:57 TextMate[GetBundles] Could not install “Closure Compiler” by using “https://github.com/macek/closure-compiler-tmbundle/tarball/master” Regards, -Josh ____________________________________ Joshua Kehn | Josh.Kehn(a)gmail.com http://joshuakehn.com

15 years, 2 months

1
0
0 0

Update python and ruby

by Alain Matthes

Hello i would like to know if it's possible to install the latest version of ruby and python and to avoid problem with textmate? What is the better method to do this ? Best regards Alain Matthes

15 years, 2 months

3
2
0 0

SQL Bundle Database Browser on Ruby 1.9.2?

by Matthew Bellantoni

Hello, Has anyone gotten the SQL Bundle's Database Browser to work with MySQL and Ruby 1.9.2? If so, can you tell me how you did it? :) Best, Matthew

15 years, 2 months

2
1
0 0

How to open files with no extension in Quicklook/Textmate (Ciaran's plugin) & Thank You Allan!

by Brandon M Fryslie

This is my first post to this list so I just want to say thank you Allan, for your fantastic ideas, for that is what truly makes TextMate not only the greatest, but orders of magnitude greater than the closest contender. I'm positive the code is delightful as well, but it was your fantastic vision that saw what could be achieved if you made it easy and accessible to not just write a script, not only write a script that can manipulate one's text to finest granularity, you didn't only give us the tools to define and parse our languages as we see fit, but you fought to package all of it up and spread it around in a transparent, open source, community driven way, so we can each build off each other and do more than any of us could have alone. Not only that, but you honestly make sitting around configuring shortcuts something I look forward to. Currently I'm plugging an RTF -> HTML converter into a shell script that will render to web preview so I won't have to leave TM for anything but AppleScripts. No other program is nearly flexible enough that I would even know where to begin. And for that, Kudos. OK, onto the second part. I'm guessing usually people ask questions, and I actually do have one I'll ask at the end. But here is the answer to something I looked for, for quite a few hours and could find almost nothing. Definitely not anything close to the solution (people were brute forcing it with bash scripts, barf). I'm sure it's common knowledge for you haxxors out there at this point, but the reason I'm posting this is so hopefully it will get put up somewhere or indexed and save some people some time. So at first, I wanted all plain-text file with any extension to open with TextMate. No problem. Then I wanted all files with NO extension to open in TextMate. That took a few minutes but I was about to find some instructions that sorta worked and get it fixed from there. However I also want all files without an extension to open in Ciaran's TM in QL plugin. It's super easy, and now I'm like "Duh!" Here are the steps: 0. Get plugin and install it if you haven't already*. Or use a different generator. Other generators will work, but they aren't nearly as cool. 1. [Optional] If you have a file you specifically want to know is gonna open, go to terminal and type mdls <path/filename>. Read the value for this key: kMDItemContentType. That is the UTI type. Remember it. 2. Type in 'mate /Library/QuickLook/TMQuicklook.qlgenerator/Contents/Info.plist' to a terminal. 3. Find the key "LSItemContentTypes" and start duplicating lines to add more UTI types. I added public.source-code, p.xml, p.plain-text, p.data, and com.apple.property-list, and I'll just continue adding more when I find types that don't open. But p.plain-text and p.data take care of unextension'd files. 4. Run "qlmanage -r" and "qlmanage -r cache" to both reload the generators and clear the thumbnail cache. * http://ciaranwal.sh/2007/11/15/quicklook-and-textmate That's it! You can use that process to make each filetype/UTI open in SOMETHING (run qlmanage -d 4 -p <file> and it prints the paths of all its generators!) so you aren't starting at a gigantic icon, sitting there, mocking you with his complete lack of utility. OK, I do have a couple questions though (*questions in bold*): *what is the status on true multikey bindings?* I've been poking around for a while, and I know how to make them for the built in NSResponder action methods (delete a line, move around, etc) with the DefaultKeyBinding.dict. I want to be able to map an arbitrary TextMate (or other program) action to these things however. I tried poking around in some nibs and got some method names from menu items, but couldn't get it working with KeyBindingsEditor. Ideally I'd be able to map it to any script, application, or action. This is similar to what ThisService does, actually (maps any script: ruby, osa, etc to OS X Services menu which can bind to a hotkey. Takes input, spits out text). Another goal is to use this 'services' ability to write a little 'Edit in TextMate' script that can take your text and a keycombo, run a TextMate command on it and spit it back into the textbox all in the background. My impression is that they nerfed Input Managers with Snow Leopard, so I'm tentatively planning on using AppleScript to move the text around, and if that is too slow I'll figure out how to write a SIMBL plugin. *What's the opinion on AppleScript for that? Can it be done reasonably fast in the background? * * * 2 last questions: first off, *what tools should I be using to write a regex for use in the language definition?* While awesome and useful, I find (especially large) regex's incredibly ugly and unintuitive. I would like to have a better syntax (my tentative idea is to use a ' ' (space) for escaping to reduce clutter), a 'metalanguage' where I can glance at a regex-equivalent and grasp its operations and matches quickly, and a visualizer to help even more. I am getting started on all of this, but I'd like to know if maybe I'm reinventing the wheel and just didn't find the right tool yet. The problem isn't that I can't write regexes, but that they are so complicated it is a barrier to new TextMate features. If we had something everyone could put together like legos, I think it would really help jump start development. As it is, I can barely adjust the line endings for the languages I have. My final question is: There is bundle/command menu at ctrl+cmd+t, in which a user can search their current scope by typing a command name, or search all scopes by typing in uppercase. One can also search by keyboard shortcut in the current scope. However* I'm unable to find a method by which to show all commands of a certain binding in every scope. Is there such a command? * I plan to write an application to keep track of system wide keyboard shortcuts and this would be very useful. Thanks again, you made coding not just fun but exciting. And always remember, the closer you get to perfection, the easier it is for others to complain. I'm sure you've been there. If I'm on windows, I don't mind just clicking the buttons and doing my thing (for a few minutes). The experience is so crappy you'd have to start over to make it good. It's only when it is sooo sooo close to perfect, like TextMate, that I can sit and ponder and think and pore over what exactly isn't quite perfect and could be fixed. And luckily I can at least fix some of them when I'm using TextMate. Cheers, mate! Brandon

15 years, 2 months

2
1
0 0

Re: git not found

by Daniel Grady

Hi Lewy, I was having this same problem; eventually I tried updating the GetBundles bundle and that fixed the problem. Have you given that a shot yet? You have to do it manually (go to the GetBundles.tmbundles directory and run 'svn up'). I also have TM_GIT set to /usr/local/git/bin/git in TextMate's Advanced Preferences. -Daniel

15 years, 2 months

1
0
0 0

Textmate not running Cucumber features

by Mikael Henriksson

Hi, I have no idea where this question should be directed but I'll try here first. I have a problem with running cucumber features from inside Textmate. I get the following error: :29:in `require': no such file to load -- /Users/mhenrixon/Projects/blog/.bundle/environment (LoadError) from :29:in `require' from /Users/mhenrixon/Library/Application Support/TextMate/Bundles/Cucumber.tmbundle/Support/lib/cucumber/mate.rb:10:in `' from :29:in `require' from :29:in `require' from /Users/mhenrixon/Library/Application Support/TextMate/Bundles/Cucumber.tmbundle/Support/lib/cucumber/mate/feature_helper.rb:1:in `' from :29:in `require' from :29:in `require' from /tmp/cucumber-32008.rb:2:in `' TM_RUBY = /Users/mhenrixon/.rvm/bin/textmate_ruby PATH = /Users/mhenrixon/.rvm/gems/ruby-1.9.2-p0/bin:/Users/mhenrixon/.rvm/gems/ruby-1.9.2-p0@global /bin:/Users/mhenrixon/.rvm/rubies/ruby-1.9.2-p0/bin:/Users/mhenrixon/.rvm/bin:/usr/local/bin:/usr/local/sbin:/usr/local/mysql/bin:/opt/local/bin:/opt/local/sbin:/opt/local/bin:/opt/local/sbin:/usr/bin:/bin:/usr/sbin:/sbin:/usr/local/bin:/usr/local/git/bin:/usr/X11/bin At some point it just stopped working, I have had it running so obviously I changed something somewhere down the line but I have no idea where to start looking. Can someone tell me what to do to make it start working again? Most of the time I use autotest but... it's nice to be able to run a feature quickly as well. Mikael Henriksson Tel: +46 (0) 730- 393 200 mikael(a)zoolutions.se

15 years, 2 months

1
0
0 0

R bundle no longer working in mac 10.6.3

by Antonio P. Ramos

Hi all, I have been using the R bundle in textmate for a while and so far a never encountered any problem. Recently, I just update my machine for the new snow leopard 10.6.3 but I can no longer use R and textmate properly: while syntax highlighting is still working, textmate simply doesn't send any script to the R console. I got a message that says: "Please install Rdaemon first", which doesn't make much sense to me, since, according to the Bundle editor, Rdaemon is alredy installed and enabled. Please, help! Best, Antonio.

15 years, 2 months

1
0
0 0

Find in Project bug

by Andrew Pennebaker

Much of the time, the Find button is disabled until I click in the Replace text field. Specs: TextMate 1.5.10 Mac OS X 10.6.5 MacBook Pro 5,1 Cheers, Andrew Pennebaker

15 years, 2 months

3
4
0 0

Re: textmate Digest, Vol 31, Issue 22

by Max Lein

Thanks for the replies! Am 28.12.2010 um 13:00 schrieb textmate-request(a)lists.macromates.com: > I don't think this is TextMate's fault. Let me guess: You're using the ProjectPlus plug-in. Does the issue below sound like your problem? Yes, you'd be right. I'll keep an eye on TextMate. So far, I've deactivated labels for git. > They usually aren't accurate anyway, in my experience. Yes, I've noticed that, too. Especially when I use manually created projects rather than just taking whole directories.

15 years, 2 months

1
0
0 0

html key bindings

by Bob Hartung

Hi all, Don't scream, I am new to textmate and the Mac. Latest version of TextMate. ^< does not perform as advertised but (Shift)^< does insert opening and closing tags. Has there been a change in the program. I do not see any other suggestion in the documentation. I have installed, removed and reinstalled the program twice without any change in behavior. I am a Mac and Linux newbie! Thanks, Bob

15 years, 2 months

2
2
0 0

2026

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

TextMate