This happens randomly. Switching from PHP to CSS files (with several files open in windows/tabs) or opening CSS files, they open with no highlighting even though the bundle is set to CSS automatically. Happens mostly when Command+Option+Arrow between tabs or opening CSS files with several hundred lines. switching to another bundle and back to CSS fixes it.
If Textmate is open for a while (maybe 2 hours +) sometimes the text fields in the Find/Replace window become unresponsive (visually). The text in the search fields won’t update even though they are changing. Closing the search window and opening it again will show the changes but it’s only fixed by quitting and relaunching.
I can't reproduce these things at will, so maybe it’s something on my system and not a bug. Using OS X Mavericks with latest Textmate on Late 2013, 15" Macbook Pro.
Hi,
not sure if "folding" is the correct word here, but, given the following code is it possible to do this in TextMate:
let x = { number: 42 }
1. I want to place the cursor after the { and when I press return, I the closing bracket should too go on a new line
let x = {
number: 42
}
2. If I put the cursor in front of the word something and press backspace, wrap it back to the original line.
Thanks
Fabian
Hi,
I noticed recently that the nightly builds started wrapping non-monospaced long before the line hits the soft wrap column or window frame.
To reproduce:
1. Make a new document
2. Type lorem<tab> to get the lorem ipsum snippet
3. Open View->Font->Show Fonts
4. Select a monospaced font like Courier
5. Select View->Enable Soft Wrap
6. Select View->Wrap Column->Use Window Frame
7. Resize the width of the window and note how the text wraps by the window frame
8. In the font panel, change to a non-monospace font like Helvetica
9. Resize the width of the window and note how the text wraps a good bit before the window frame
Expected result is that step 9 behaves like step 7.
After a little bit of sleuthing I think the relevant commit is https://github.com/textmate/textmate/commit/f487c5d57585f98d16273e0fa63b8a3…
The character used to calculate column width changed from m to n, which doesn’t matter for monospaced fonts, but for non-monospaced fonts it can be quite a difference.
Would it be possible to change back to n?
Although this can have the opposite effect of the line sometimes overshooting the window frame by a tiny bit before soft wrapping. To fully fix this you would have to calculate the soft wrap width of each individual line, but I presume that that is quite a big change and could present speed issues with large files.
Cheers and thank you for TextMate,
Kim
Is it possible to show an NSPopover using a custom nib and the dialog command? Or does the NSPopover require some code to show it?
My use case is a command I’m working on for displaying generated documentation, i.e. JavaDoc, for a given symbol. So far I’ve been using a tooltip, It’s working fine but the problem with the tooltip is that it doesn’t support scrolling, when the content gets too long. Ideally I would like something that also is interactable, like clicking on links. I would like to avoid the HTML window/view because I think it’s bit too heavy.
--
/Jacob Carlborg
> From: "Allan Odgaard" <mailinglist(a)textmate.org>
> Subject: [TxMt] Re: Weird file not updating problem
> Date: August 21, 2016 at 2:56:20 AM PDT
> To: "TextMate users" <textmate(a)lists.macromates.com>
> Reply-To: TextMate users <textmate(a)lists.macromates.com>
>
>
> On 20 Aug 2016, at 8:57, Jack Royal-Gordon wrote:
>
>> I made some changes to a file that was open as part of a Rails project (the whole project was opened) and saved the changes. TextMate showed the file as having no unsaved changes. However, inspecting the file outside of TextMate, I could see that the the changes were not saved.
>
> And even pressing ⌘S did not change that? ⌘S will always save, even if it shows “no changes”.
Did press ⌘S several times, as when I ran the file and it did not work I thought I had forgotten to save.
>
> Also, when you have a file open, you can use Bundles → Diff → Document With Saved Copy. This will run a diff util on the buffer and the file on disk, that should be able to confirm if somehow TM’s buffer is different with the file on disk after ⌘S.
That’s a good idea. Did not know about that.
>
>> I rebooted my computer and when TextMate reopened, there was the file with my changes showing (but which were not saved although again it showed as having no unsaved changes). I had to close the file, reopen it, and re-apply the changes before saving again in order to actually save the changes
>
> So you rebooted, re-opened the file, and while TM found your (unsaved) changes, it would still not save on ⌘S. But closing file (again) and re-opening now did show the file on disk, and you could save?
Correct. When I reopened, it showed the file without the changes that did not save.
>
>> […] I wanted to see if this was a known issue with 2.0-beta.12.
>
> Nothing I have heard of before, but from the description above, it really sounds like TextMate was operating on a different file than what you was inspect on disk, that would explain all of the behavior perfectly, including rebooting and showing the updated file “with no changes”, yet after closing it and opening the (right) file, you now lost the changes, and had to re-do them.
Since I opened a folder in Textmate and was accessing files via the File Browser, I have a hard time imagining how it was accessing a different file. But I agree that that would explain all of the strange behavior.
>
> So what should probably be looked into is, how did it get to operate on this other file, and where on disk was it?
Yes, that would be the question.
>
> Did anything work on the files on disk (TextMate will track renames, hence if you open /path/to/file and then move it to /path/to/other/place, it will update its reference).
>
> Should it ever happen again, you can right-click the proxy icon to see where the file is on dis, or use File Browser → Reveal Document.
I will do that. Thanks for the response.
Hi All,
I made some changes to a file that was open as part of a Rails project (the whole project was opened) and saved the changes. TextMate showed the file as having no unsaved changes. However, inspecting the file outside of TextMate, I could see that the the changes were not saved. I rebooted my computer and when TextMate reopened, there was the file with my changes showing (but which were not saved although again it showed as having no unsaved changes). I had to close the file, reopen it, and re-apply the changes before saving again in order to actually save the changes (I probably could’ve copied the entire file onto the clipboard before I closed and reopened and made the changes that way, but I didn’t expect the changes to be gone).
Before opening an issue on GitHub, I wanted to see if this was a known issue with 2.0-beta.12. I’m running on OS X 10.11.6. Let me know if you need any other configuration information or have any thoughts that might help me to reliably reproduce this problem (I’ve noticed a couple times where files that were left open while changing GIT branches did not recognize that the underlying files had changed as TextMate 1 did. Might this be an issue with capturing directory change events?
Thanks in advance for helping!
Jack
If I have a command with the following Ruby code:
require ENV['TM_SUPPORT_PATH'] + '/lib/ui'
result = [{ 'match' => 'foo', 'display' => 'foo' }]
TextMate::UI.complete(result)
If I type "f" and then invoke the command the completion menu appears as expected, containing "foo". If I type a non-matching character, like "s" then it takes around three seconds for the menu to disappear and the "s" to appear in the editor.
Not sure if it's related, but if I select some other text in the meantime the "s" appears immediately.
—
/Jacob Carlborg
Hi,
When I do a "Find in Project" and click "Replace All", the dialog states "2
replacements made across 1 file(s)".
But when I run the search again, I get the same results. When I open the
concerning file, and click "Replace All", the replace goes just fine.
Also, turns out it's possible to click on "n replacements made ...", which
makes it blue. Does this serve a purpose?
– Koen
Sent from [Nylas N1](https://link.nylas.com/link/33wd9n5m5l3cdcz4d1oikbwcz
/local-58ab6731-da97/0?redirect=https%3A%2F%2Fnylas.com%2Fn1%3Fref%3Dn1&r=dGV4
dG1hdGVAbGlzdHMubWFjcm9tYXRlcy5jb20=), the extensible, open source mail
client.
I got used to being able to write short documents in Markdown, preview and then print to PDF. However, this seems to be broken now. I can preview fine, but printing to PDF (or opening in preview) causes Textmate to crash. Is this a bug, or something I’ve done wrong?
Thanks
João
I like the new feature in v2.0-beta.11.10 where targeted settings for
untitled files use file patterns that match the file's directory. It does
not, however, seem to pick up the fileType setting.
Would be nice to specify that new files created in various directories in
the project each have a given fileType based on their location.
I just started TextMate and it prompted me to install this new version 2.0
beta 12. That's all great. But I'd like to know what changed from the
previous version. I've looked at the various TextMate places (textmate.org
and github) but can't find any kind of list of "what changed" in the new
version, and not even a list of issues that got closed.
Just curious because TextMate is a great tool that I rely on and I'd like
to know what's going on.
I’m currently working on adding some new features to the D bundle. These are features like code completion, go-to-definition and similar features. These commands are using a parser tool which expects the current cursor position in bytes from the start of the source file. TextMate only provides the cursor position in the form of column and line number. This requires the commands to convert to and from cursor position in bytes to cursor position in column/line number. Is this information something that TextMate already has and can provide or, if not, provide it in a more efficient way then the conversion performed by the command?
I would also need to be able to specify the cursor position in bytes using the “mate” tool. I’ve also looked at the implementation of the Go bundle for the same commands and it has the same issue.
—
/Jacob Carlborg
TM2 does a nice job of formatting Github markdown, and places it in a new
window. Unfortunately, I have yet to figure out how to print or export the
contents of the formatted window. Is this a bug in TM2 or in my head?
Lewy
> This cannot currently be changed.
> Can you tell me what you would like to change it to?
I often a) have a lot of files open that are relevant for some project
(source files, plus several plain text "notes" files), and b) several
of them have long file names.
The long file name tabs take away a lot of tab bar space; as a
workaround, I try to rename them to something shorter, if possible, or
I close/reopen them. It's not my ideal workflow though, where I just
cycle through the open tabs, and the names can be as long they need to
be.
Ideally, I'd *cut down* the file name via some regex, say, stripping
the file ending, and generally, only displaying the last n characters
of the name, so that all tabs would have the same width (and I can
have more of them open without the tab bar overflowing).
I know... bit of a minor/OCD-ish problem, but that would be my ideal
scenario -- it would be similar to what I can already do with the
window title.
> You _can_ give documents a custom display name, but currently only
> via `mate` when they are opened, but this display name is used beyond
> just the tab titles, I assume you want to keep the original display name
> in other locations.
I wouldn't mind it, since I'm more interested in *shortening* the tab
title than I am in displaying permanently the full title (which I can
always get it via tab mouse over).
But to be sure: does the 'mate' solution work together with "open
(recent, favorite) project" at TM startup? Because that's what I do it
now, having set "showFavoritesInsteadOfUntitled" to true (and actually
using a bit of a hack to "bookmark" different projects, consisting of
files across various directories, by abusing that the relevant
information seems to be stored in "RecentProjects.db").
I’m working on a new RuboCop bundle. I want the linting to take place
everytime a Ruby document is saved, with warnings then displayed in the
gutter.
So I implemented a very simple command using
`callback.document.did-save` and `TextMate::Executor.run`, and it works
great so far. However, if I set the command to “Output: Discard”,
TextMate’s UI seems to be blocked (no cursor movement or other editing
possible) while the command is running.
Interestingly this does not happen with “Output: New Window”: In this
case I can continue editing the document even while the command is still
running.
Is this a bug? Or is there are workaround?
(Eventually the bundle will of course also include a command that shows
RuboCop’s output. But I consider this too intrusive to run on every save.)
Stefan
> It would be easy to read this from user defaults instead, though
> you may also need preferences as to how to truncate a title.
Tinkered a bit myself yesterday with the source, it sort of worked, but
I always seemed to break the layout in some subtle way (I guess it
didn't help that I didn't quite understand what 'tabViewSpacing' does
exactly). So when I noticed the brandnew build with the new user default
settings I felt a bit stupid.
Seriously though, thanks!
One last question if you allow: minimumTabSize and maximumTabSize don't
behave exactly like I initially thought they would. For example, setting
minimumTabSize = maximumTabSize = some_value made me expect
all tabs would now be of identical (horizontal) width, at any time, but
that's not the case (long file names still get wider tabs than what is
set in maximumTabSize).
That's by design I assume, as in: maximumTabSize only kicks in when the
tab bar overflows. Did I get that right?
I stumbled upon https://github.com/textmate/textmate/pull/1297. The PR
says it was merged, but I think this was a mistake? What’s the current
state of this? Would be really nice to use this for RuboCop, RSpec and
co :-)
Stefan
If I have a command with the following Ruby code:
require ENV['TM_SUPPORT_PATH'] + '/lib/ui'
icon_plist = "{ tm_small = '/Applications/TextMate.app/Contents/Resources/TextMate Help/images/tm_small.png'; }"
system(ENV['DIALOG'], "images", "--register", icon_plist)
result = [{ 'match' => 'foo', 'display' => '12345', 'image' => 'tm_small' }]
TextMate::UI.complete(result)
If I type "f" and invoke the command the completion menu will appear. But it looks like the menu doesn't take into account the width of the image since the "5" is cut off and there's no margin between the "4" and the edge of the menu.
—
/Jacob Carlborg
This has already been discussed almost two years ago:
http://lists.macromates.com/textmate/2014-October/037962.html
I just realized that since beta 9.3 it is possible to use coloured
images for the gutter, so I decided to give it a try (see attached
screenshot).
I like this look, especially as warning marks stand out much better now
against the SCM status marks.
If you’re interested, here’s the fork:
https://github.com/noniq/scm-diff-gutter.tmbundle/tree/coloured-marks
In the discussion back then Allan mentioned that he considered adding a
dedicated “diff” api:
> I like the mockup; but for the API, there are several parameters that
> set it apart from the single-color scalable shape one can currently
> place to the left of a line, so it would probably be better to make a
> dedicated “diff” API where the command set the status for a line
> range, and then it’s up to TextMate, how to visualize that.
Is this something that will be implemented in the foreseeable future? Or
should I try to polish my current solution to make it ready for merging?
(Open questions are at least: How to adapt for different gutter
background colours? What about colour-blind people [1]?)
[1]: http://lists.macromates.com/textmate/2014-October/037980.html
Stefan
hello all,
I’m having a peculiar problem.
Context: Using the git bundle, when I commit, I get a list of changed files. I can hit the Diff button next to a file to get a diff between staged and the last commit.
Expected: I see a diff results file with coloring (e.g. + lines green, - lines red).
Actual:
- I see no coloring and a prompt to install the Diff bundle.
- Obeying the prompt does not change anything.
- I get a prompt to install again and there is still no coloring.
- On the bottom window popup to select file type, there is no option for a Diff file.
This happens on a newly installed TextMate, 2.0.11.16.
Is anyone else seeing this?
best wishes, Eric
—
Eric Hsu, Professor of Mathematics
Director, Center for Science and Mathematics Education
San Francisco State University
http://math.sfsu.edu/hsu
> On Aug 6, 2016, at 7:01 AM, textmate-request(a)lists.macromates.com wrote:
>
> Send textmate mailing list submissions to
> textmate(a)lists.macromates.com
>
> To subscribe or unsubscribe via the World Wide Web, visit
> http://lists.macromates.com/listinfo/textmate
> or, via email, send a message with subject or body 'help' to
> textmate-request(a)lists.macromates.com
>
> You can reach the person managing the list at
> textmate-owner(a)lists.macromates.com
>
> When replying, please edit your Subject line so it is more specific
> than "Re: Contents of textmate digest..."
>
>
> Today's Topics:
>
> 1. display problem (Kyle Johnson)
>
>
> ----------------------------------------------------------------------
>
> Message: 1
> Date: Sat, 6 Aug 2016 10:01:06 -0400
> From: Kyle Johnson <kbj(a)linguist.umass.edu>
> To: TextMate users <textmate(a)lists.macromates.com>
> Subject: [TxMt] display problem
> Message-ID: <8F38CAF9-12A9-496D-9B6A-80194A475529(a)linguist.umass.edu>
> Content-Type: text/plain; charset="utf-8"
>
> Upon upgrading to 2.11.16, I?ve seen a new behavior from TextMate. When I jump to a new point in a document ? say by using Find ? lines of text overlap. If I resize the window, it sorts itself out, but moving the cursor around or entering text doesn?t cause it to. The following screenshot shows the problem.
>
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL: <http://lists.macromates.com/textmate/attachments/20160806/ea5d4ad4/attachme…>
> -------------- next part --------------
> A non-text attachment was scrubbed...
> Name: flow.png
> Type: image/png
> Size: 778002 bytes
> Desc: not available
> URL: <http://lists.macromates.com/textmate/attachments/20160806/ea5d4ad4/attachme…>
>
> ------------------------------
>
> _______________________________________________
> textmate mailing list
> textmate(a)lists.macromates.com
> http://lists.macromates.com/listinfo/textmate
>
> End of textmate Digest, Vol 99, Issue 5
> ***************************************
Upon upgrading to 2.11.16, I’ve seen a new behavior from TextMate. When I jump to a new point in a document — say by using Find — lines of text overlap. If I resize the window, it sorts itself out, but moving the cursor around or entering text doesn’t cause it to. The following screenshot shows the problem.
Hey
I was trying to find out if there's a way to change the title of open tabs
(currently: full file name), similar to how one can change the window
title, as described in detail e.g. here:
http://blog.macromates.com/2011/format-strings/
(great read, by the way).
Since there's not equivalent to the 'windowTitle' variable in
.tm_properties, that path is not an option.
So I thought I'd be clever by manually setting whatever variable it is the
tab title relies on. Any chance that might work out?
I tried already setting static values for the obvious candidate variables
(TM_FILEPATH, TM_DISPLAYNAME), which had the expected effect on the
*window* title, but didn't affect *tab* title, which makes me think I'm on
the wrong track here.
Anyone knows the details and cares to correct my misunderstanding?
Hi there,
I'm a researcher studying software evolution. As part of my current
research, I'm studying the implications of open-sourcing a proprietary
software, for instance, if the project succeed in attracting newcomers.
However, I observed that some projects, like _textmate_, deleted their
software history.
https://github.com/textmate/textmate/commit/9894969e677c39007c2860f09e3f823…
Knowing that software history is indispensable for developers (e.g.,
developers need to refer to history several times a day), I would like to
ask textmate developers the following four brief questions:
1. Why did you decide to not keep the software history?
2. Do the core developers faced any kind of problems, when trying to refer
to the old history? If so, how did they solve these problems?
3. Do the newcomers faced any kind of problems, when trying to refer to the
old history? If so, how did they solve these problems?
4. How does the lack of history impacted on software evolution? Does it
placed any burden in understanding and evolving the software?
Thanks in advance for your collaboration,
Gustavo Pinto, PhD
http://www.gustavopinto.org
When I file drop a .shp file, the cursor jumps to the line below. How can I have the cursor jump to before the <- ?
Also, once I have dropped the file into TextMate, how can I make TextMate the active window (rather than the active window being Finder)?
Attached show the file drop and the code that does the file drop
Ross Ahmed
Ecologist
—
07875533906
Twitter: @RossAhmed <https://twitter.com/RossAhmed>
LinkedIn: Ross Ahmed <https://www.linkedin.com/pub/ross-ahmed/2a/775/590>
Hi guys
I wanted to know if there was a way in Textmate to do a find and replace on text files generated as a youtube transcript. These are text files downloaded containing the closed captioning text.
The time stamp lines are formatted with quasi timecode as start,end: 0:00:10.100,0:00:11.191
So there would be a line of timecode, then 1 or more lines of text, then a blank line, and then it starts over again on a new line with the next timecode start.
Also, if there is a way to remove white space after commas, but keep sentences in tact, that would save heaps of time.
These transcript files are long, and are taken from videos that are 25minutes to 1 hour duration, so doing it manually would be hell. At least if there is an easy way to strip out this stuff, manually separating paragraphs would be pretty fast.
Any advice is welcomed.
thanks
Hello!
A couple of days ago my Emmet Plugin stopped working.
This might not seem like a big deal, but I love Emmet, and so do many of my
web-dev cohorts.
I traced the error down to explicit blacklisting of this plugin in TextMate.
https://github.com/textmate/textmate/commit/4b19e404403c0d237578ecac583796d…https://github.com/textmate/textmate/commit/81d2586ffcfc9385d9bb362febda7c7…
This blacklisting is intentional, and rational. Apparently users have had
the plugin installed and its been crashing for years. I’m not sure if this
is because its crashing in use, or if its because the plugin was installed,
but doesn’t support the OS and therefore it crashes in the background
without issue, or if there are other crashes.
What I do know is that the plugin isn’t really being updated, its sort of
frozen in time, but it does work if you use @pingjiang’s custom built
binary from https://github.com/emmetio/Emmet.tmplugin/issues/10. @pingjiang
Had gone in and updated the plugin, I’m not exactly sure what was required
for him to do, but it was at least partially just a recompilation on a
newer machine (updating the release targets).
Is there any way to know if this custom built plugin is causing crash
reports, or is it just the original?
Given that it takes some effort to get a working version, I totally get if
this plugin remains blacklisted *but *I’d like to see a path to Emmet
becoming easy to get working on TextMate sometime soon.
What I’ve discovered so far is that the blacklisting uses "contains" rather
than "equals" so updating the Bundle identifier to
'io.emmet.EmmetTextmate2' was not enough as it still contained the original
"io.emmet.EmmetTextmate" so in my new bundle i’m using "io.emmet.EmmetTM2"
instead. Could this be changed to equals?
My modified plugin is available here;
https://github.com/loadedsith/emmet-objc/releases/tag/v10.11.1
or more directly
https://github.com/loadedsith/emmet-objc/releases/download/v10.11.1/Emmet.t…
My change;
https://github.com/loadedsith/emmet-objc/commit/4791f1f6b5f5bc286754fed5f9b…
And the original supporting changes;
https://github.com/pingjiang/emmet-objc/commit/d58f30ce40f2a7c07f3af0d4e4b8…
Thanks,
Graham Heath
I’m working on a bundle to support YAML front matter in Markdown (see
https://github.com/noniq/Markdown-Front-Matter.tmbundle/).
The grammar for this is easy, but I also want to strip front matter
blocks (if present) from the document before processing the markdown.
And it would be really cool to have this working with whatever Markdown
bundle (standard, GitHub Markdown, …) the user is currently using.
So in principle I want to implement a preview command that just strips
the frontmatter and then delegates to whatever else preview command
would have been normally used, if this bundle would not be installed
(like calling `super` in an overridden oop method).
Is this possible?
TextMate has a nice behavior when the caret is between curly braces and you press return
{|}
turns into
{
|
}
I'd like to have the same behavior for round and square brackets. And I achieved that by replacing in the grammar the meta.brace.round.js and meta.brace.square.js scopes with pairs of punctuation.section.scope.begin.js and punctuation.section.scope.end.js, but this looks like a hack to me, so I was wondering if there's a correct way to achieve that.
Today I noticed that a bundle command using TextMate::UI.request_item is
no longer working: Instead of opening a dialog window it only gives a
warning:
tm_dialog (async_close): Window '(null)' doesn't exist
Simple command to reproduce:
```
#!/usr/bin/env ruby18 -wKU
require "#{ENV["TM_SUPPORT_PATH"]}/lib/ui"
TextMate::UI.request_item(:items => %w(foo bar baz), :title => 'Title')
```
Known bug?
I've discovered today that the "insert template" command for the LaTeX
bundle doesn't work. It fails silently. I'm using TextMate 2 beta 11.5
on OS 10.11.5.
Kyle
I'm working on adding support for autocomplete to the D bundle. I'm
using the Ruby method "TextMate::UI.complete" to display the completion
result. This UI supports displaying images in the list of the results,
first it took me a while to figure out that the images needs to be
registered using the dialog command.
Now the question is why is this necessary? I looked in the source code
for the dialog command and it looks like the register action/sub command
creates NSImages of the given paths. I was thinking that the "popup"
dialog command could automatically register the images.
As far as I know it's not possible to automatically execute a bundle
command ones, so the completion command needs to register the images
every time because it doesn't know if the images have already been
registered.
--
/Jacob Carlborg
Since a recent update (maybe since
[60180f7](https://link.nylas.com/link/33wd9n5m5l3cdcz4d1oikbwcz/local-
2f068e83-2834/0?redirect=https%3A%2F%2Fgithub.com%2Ftextmate%2Ftextmate%2Fcommit%2F60180f77ec16a4c058c8845ebb9eb41ab6ef227e&r=dGV4dG1hdGVAbGlzdHMubWFjcm9tYXRlcy5jb20=)
?) callback.document.will-save isn't working anymore when used as semantic
class in a bundle.
Has this been changed?
Koen
Sent from [Nylas N1](https://link.nylas.com/link/33wd9n5m5l3cdcz4d1oikbwcz
/local-
2f068e83-2834/1?redirect=https%3A%2F%2Fnylas.com%2Fn1%3Fref%3Dn1&r=dGV4dG1hdGVAbGlzdHMubWFjcm9tYXRlcy5jb20=),
the extensible, open source mail client.
Is there some mechanism that is suppressing keyboard events in the
browser that pops up when showing HTML in a new window? Pressing the
tab key does not focus links in the window. When I listen for `keyup`
events on `document`, tabbing is trapped to the body element.
Ryan
Since templates were discontinued I've been using this AppleScript to
make a quick HTML doc:
#!/usr/bin/osascript
tell application "System Events"
keystroke "p"
using {control down, option down, shift down}
keystroke "4"
"<!DOCTYPE html> <html lang=\"da\"> <head> <meta charset=\"utf-8\">
<title>$1</title> <meta name=\"description\" content=\"\"> <style
type=\"text/css\" media=\"screen\"> *{margin:0;padding:0;} $2 </style>
</head> <body> $0 </body> </html>"
end tell
It’s been working fine until now. I’m on beta.11.8, and I’m very sorry,
but I don’t know if the problem arose with this update or one of the
ones from last week.
The problem is rather unusual. It appears that System Events is
reversing the order of the commands.
Instead of simulating the keyboard shortcut for selecting PHP, all of
the template is inserted via keyboard simulation, then 4 for PHP is
pressed and only THEN the shortcut is pressed. But it doesn’t go back to
working, if I reverse the sequence in the command code.
This is what it looks like:
Resultat
Here are the settings for the command:
Settings
Rasmus
Hi,
I really love the simple yet effective autocompletion using [ESC].
However, I just began to dig into Scheme, and it seems the autocompletion doesn't work with functions whose name has dashes.
For example, with the following code :
(define (a-b x) (* x x))
(define c-d 2)
If I try and type a and press [ESC], nothing happens. However, when I try with c, then the completion works.
It might be a problem of the grammar.
How can I fix it ? I don't know how the grammar influences the autocompletion.
Best regards,
Louis
I was on Mavericks this morning, attempting to compile TextMate (latest git
HEAD)
But I suspect its no longer possible since it appears to require a more
recent version of XCode - error in one function due to 'forced copy in
constructor'. It was related to a parents = {} parameter, I didn't dig too
deeply.
Not to worry, it gave me a good reason to upgrade to El Capitan.
So I've done that, and updated all the homebrew packages, aswell as Xcode
The github states that hg (mercurial) is optional, but I installed it
anyway to allow the unit tests to run.
Unfortunately I'm still having problems
----- environment
[carpii@imac:~/dev/textmate]$ clang++ --version
Apple LLVM version 7.3.0 (clang-703.0.31)
Target: x86_64-apple-darwin15.5.0
Thread model: posix
InstalledDir:
/Applications/Xcode.app/Contents/Developer/Toolchains/XcodeDefault.xctoolchain/usr/bin
[carpii@imac:~/dev/textmate]$ clang --version
Apple LLVM version 7.3.0 (clang-703.0.31)
Target: x86_64-apple-darwin15.5.0
Thread model: posix
InstalledDir:
/Applications/Xcode.app/Contents/Developer/Toolchains/XcodeDefault.xctoolchain/usr/bin
[carpii@imac:~/dev/textmate]$ xcodebuild -version
Xcode 7.3.1
Build version 7D1014
[carpii@imac:~/dev/textmate]$ sw_vers -productVersion
10.11.5
------- compilation
[carpii@imac:~/dev/textmate]$ ninja -t clean
Cleaning... 515 files.
[carpii@imac:~/dev/textmate]$ ninja io
[1/1] Generate ‘build.ninja’…
[109/109] Run test ‘/Users/carpii/build/TextMate/Frameworks/io/test_io’…
[carpii@imac:~/dev/textmate]$ ninja TextMate
[229/1107] Run test ‘/Users/carpii/build/TextMate/Frameworks/scm/test_scm’…
FAILED: /Users/carpii/build/TextMate/Frameworks/scm/test_scm && touch
/Users/carpii/build/TextMate/Frameworks/scm/test_scm.run
/bin/sh: line 1: 7210 Segmentation fault: 11
/Users/carpii/build/TextMate/Frameworks/scm/test_scm
[229/1107] Compile ‘Frameworks/file/src/open.cc’…
ninja: build stopped: subcommand failed.
Any ideas please?
I've created a bundle for ESLint and I'd like to find out the requirements for submission to Textmate's bundle list in the preferences pane.
https://github.com/ryanfitzer/eslint.tmbundle
Thanks,
Ryan
I was playing around with the new 'theme' setting in ./.tm_properties.
Given the file: ./webapp/WEB-INF/web.xml
this works:
[ "text.xml" ]
theme = 71D40D9D-AE48-11D9-920A-000D93589AF6
this does not:
[ "*.xml" ]
theme = 71D40D9D-AE48-11D9-920A-000D93589AF6
this works:
[ "webapp/**" ]
theme = 71D40D9D-AE48-11D9-920A-000D93589AF6
this does not:
[ "webapp/WEB-INF/**"]
theme = 71D40D9D-AE48-11D9-920A-000D93589AF6
It was my understanding that all of these selectors should apply the
setting to this file? What am missing?
While testing out per-type themes, I noticed all `.txt` files came up as
Python. I’m sure I did this to myself at some point, but I couldn’t
get it to go back.
It should be just a matter of opening a `.txt` file and selecting
“Plain Text”, right?
I was able to fix it manually by editing `Global.tmProperties`, but
thought I’d report it in case it’s a bug introduced with the new
automatic type detection or something.
On a related note, changing the type of an open document doesn’t
change the theme, but it’s a brand new feature. That’ll work
eventually, right?
--
Rob McBroom
http://www.skurfer.com/
I’m not able to drag tabs to a different position within the same window. I found a workaround where I could drag it to another window and then back to reorder. Anyone else having this problem?
Latest nightly build.
Ed
Posted this in the github bugs repo
(https://github.com/textmate/bugs/issues/21), but was directed here for follow
up.
Anyway, for some reason "Go to Related File" with a custom relatedFilePath
worked in beta 10, but not thereafter.
I've setup a test project, uploaded here:
https://github.com/textmate/bugs/files/349542/textmate-related-file.zip
When you open the project with beta 10, and open the `test.rb` file, `Go to
Related File` will take you to `test_spec.rb` and from there `Go to Related
File` will take you back to `test.rb`.
In any version after that, eg the latest beta, 11.4, this won't work.
Has something changed with the format of `relatedFilePath`?
Thanks,
Koen
Sent from [Nylas N1](https://nylas.com/n1?ref=n1), the extensible, open source
mail client.
Hi all,
On this Monday morning I want to thank all the folks that contribute to the
constantly improvements of TextMate, and its bundles!
As a TM-user I really appreciate all your work!
Regards,
Feek
--
View this message in context: http://textmate.1073791.n5.nabble.com/Just-want-to-thank-tp30144.html
Sent from the textmate users mailing list archive at Nabble.com.
Has anyone else noticed that if you do a project search and get matches in
files (e.g. minified JS) that have very long lines, when you scroll past
those lines the app gets super bogged down, sometimes to the point of
needing to be force-closed?
I would have figured this would have been fixed by now but maybe it's
something peculiar to my setup. Please advise.
Thanks.
--
Tom Smyth
Worker-Owner, Sassafras Tech Collective
Specializing in innovative, usable tech for social change
sassafras.coop *·* @sassafrastech
Resident, Touchstone Cohousing
touchstonecohousing.org
Is there a 'defaults' option to disable atomic saves in TM2?
I host all my code on linux VM's on an ESXI server
Usually I mount them via AFP, but Im ditching this now in favour of Samba
Since moving to SMB/CIFS, I'm finding TM2 is now frequently complaining
that it cannot save a file due to 'Resource Busy'
When this happens, even restarting TM2 doesn't fix it, I have to restart
the Samba service on the server (which isn't a great solution)
I think it may be somehow related to atomic saves, so Id like to disable
those (given that I still have git to protect any aborted writes)
Thanks
