- TextMate - lists.macromates.com

by Simon Ruderich

19 years, 11 months

1
0
0 0

LaTeX configuration file

by Mark Eli Kalderon

Hi, perhaps I haven't understood the syntax correctly, but I have tried editing the LaTeX configuration file and I am getting no love. I wanted to add a quote environment. I tried the following which has no apparent effect: quote = { triggers = ( 'qu', 'quote'); }; All the best, Mark _________________ Mark Eli Kalderon Department of Philosophy University College London Gower Street London WC1E 6BT Dept webpage: http://www.ucl.ac.uk/philosophy Personal wepage: http://www.kalderon.demon.co.uk

19 years, 11 months

2
4
0 0

Complete Latex Outline

by Helge Hartmann

Hello! I found an earlier post in the archiv files, but it seems, that this command isn´t realised yet. My Latex projects contain multiple files and the Code Brwoser only shows the outline of the active one. What I need, is an outline of the whole project. Are there any solutions? Helge

19 years, 11 months

2
1
0 0

Dropdown options in snippet

by Ed Singleton

Is it possible to provide a list of options to someone in a snippet? For example at a tabstop, rather than them writing in text, you could provide a list of options that they could select from? I'm imagining something similar to the one that pops up to disambiguate shortcuts. Ed

19 years, 11 months

3
4
0 0

Repeating tabstops in snippet

by Ed Singleton

Is it possible to have a repeating tabstop in a snippet? for example it would be great to have a snippet to insert a html option list: <select> <option value="$1">$2</option> </select> You tab to $1, fill in the value, tab to $2, fill in the content, then when you press tab again, it inserts another option: <select> <option value="1">Cherry</option> <option value="$3">$4</option> </select> And carries on doing so for an arbitrarily long time. If it's possible to do this I'd be very grateful. Thanks Ed

19 years, 11 months

4
4
0 0

Re: PGP signed mails

by Heiko Witte

On 24.10.2006, at 13:27, textmate-request(a)lists.macromates.com wrote: > Heiko Witte schrieb: >> Hi, >> >> every mail from this mailing list is signed with a PGP key >> (0x7B7C623764AB61E7). Where can I get this public key ? I already >> searched the mailing lists but couldn't find any related topic. >> >> Thanks >> >> Heiko > > Every email? I just searched pgp.mit.edu for this key and came up with > my own key ;) > > http://pgp.mit.edu:11371/pks/lookup?search=0x7B7C623764AB61E7&op=index > > Regards, Horst I added your key to my gpg keychain, now everything's fine =) Thanks, Heiko

19 years, 11 months

1
0
0 0

PGP signed mails

by Heiko Witte

Hi, every mail from this mailing list is signed with a PGP key (0x7B7C623764AB61E7). Where can I get this public key ? I already searched the mailing lists but couldn't find any related topic. Thanks Heiko

19 years, 11 months

2
1
0 0

Latex.tmbundle fix for XeTeX.

by Dan Sandler

FYI for LaTeX bundle maintainers and users: I recently updated XeTeX (to v0.995, 16-Aug) and discovered that previewing in TextMate had become kind of cranky (though running xelatex from the command line still worked fine). The crankiness: using "Typeset & View (PDF)", the first page of output would be the following, in Computer Modern: [zf ]preparseRendererAAT,ICU The correct LaTeX output would appear starting on the next page. After a heap of digging around (resulting in [1], which pointed to a path problem with xkeyval.tex), I figured out that the call to kpsewhich is causing the wrong paths to get expanded (in particular, the texmf.tetex versions were taking precedence over texmf.local). This seems to fix it for me: Old: export TEXINPUTS="$TM_BUNDLE_SUPPORT/tex//:$(kpsewhich --expand- var '$TEXINPUTS')" New: export TEXINPUTS="$TM_BUNDLE_SUPPORT/tex//:$(kpsewhich -progname $TEX --expand-var '$TEXINPUTS')" HTH, as they used to say. --ds [1] http://www.tug.org/pipermail/xetex/2006-August/004700.html

19 years, 11 months

2
1
0 0

My CSS drag command contribution

by Brett Terpstra

To add on to James' nifty drag commands, here's mine for adding a complete background line in a definition. It's tab stopped a little differently than the normal background command, as I have modified mine to the way that my brain works. I'm not sure how the rest of you will feel about the newline at the end, it works for me with the way I format my code. Feel free to pull it and the -e argument out from the echo statement. File Types: png, jpeg, jpg, gif echo -ne "background:\${1: #\${2:DDD}} url('$TM_DROPPED_FILE')\${3: \$ {4:repeat/repeat-x/repeat-y/no-repeat} \${5:scroll/fixed} \${6:top/ center/bottom/x-%/x-pos} \${7:left/center/right/y-%/y-pos}};\n\$0" Scope: meta.property-list.css Brett Terpstra : Art Director Circle Six Design, Inc. 111 Riverfront Dr, Suite 204 .................................................. p: 507.459.4398 877.858.4332 f: 1.866.540.3063 e: brett(a)circlesixdesign.com http://www.circlesixdesign.com .................................................. Brett Terpstra : Art Director Circle Six Design, Inc. 111 Riverfront Dr, Suite 204 .................................................. p: 507.459.4398 877.858.4332 f: 1.866.540.3063 e: brett(a)circlesixdesign.com http://www.circlesixdesign.com ..................................................

19 years, 11 months

1
0
0 0

Scoping Question

by Brett Terpstra

Is there a way to scope a snippet in the CSS bundle to mimic the Special: Return Inside Empty Open/Close Tags in the HTML bundle? I'd like to have the same behavior between empty brackets, but they obviously behave differently and I have a very vague understanding of the language file at this point. I got the command to work the first time, but now it adds an extra line break every time I hit enter. Any pointers? Thanks, Brett Brett Terpstra : Art Director Circle Six Design, Inc. 111 Riverfront Dr, Suite 204 .................................................. p: 507.459.4398 877.858.4332 f: 1.866.540.3063 e: brett(a)circlesixdesign.com http://www.circlesixdesign.com ..................................................

19 years, 11 months

2
2
0 0

CSS Drag Actions

by James Hicks

Not sure if anyone has done these yet but here are some simple drag actions for images in CSS. The second one if for dropping between url() so you can use the background snippet for instance then drag an image between the brackets. Image as a background: File types: png, jpg, jpeg, gif Commands: echo "background-image: url(\"$TM_DROPPED_FILE\");" Scope: meta.property-list.css Image Path: File types: png, jpg, jpeg, gif Commands echo -n "\"$TM_DROPPED_FILE\"" meta.property-value.css

19 years, 11 months

2
1
0 0

Question regarding scoping

by Branko

I don't really know how to ask this question in a simple manner so here it goes: I'm doing some HTML coding and need to add JavaScript using the Prototype framework. In this early develpment phase I like to write JavaScript embedded in HTML. When I write a script tag, "source.js.embedded.html" gets added to the scope. How can I tell TextMate to use features from the Prototype & Scriptaculous bundle in addition to the JavaScript default one? Shifting languages is tedious and messes up the highlighting.

19 years, 11 months

2
1
0 0

Re: [TxMt] Wrap Text as Link with Title

by Tilman

I have a problem with Brett's "Wrap Text as Link with Title". It works fine, also gets the link from the web, but then something like this is inserted: 2006-10-23 13:38:42.367 CocoaDialog[569] InputManagersManager startup <a href="http://macromates.com/" title="TextMate — The Missing Editor for Mac OS X" >TextMate</a> the second line is perfect, but i wonder where the first line came from? i talked to brett about it but he is not able to reproduce the error. any ideas? thanks! Tilman. _______________________________________________________________ Tilman. net citizen /// designer /// teacher ____ digital homes ::: personal http://www.tint.de /// collective http://www.dkdl.de ____ analogue homes ::: germany /// nuernberg /// lauf /// heuchling ____ mailto ::: tilman(a)tint.de ::: the future is in beta.

19 years, 11 months

2
1
0 0

LaTeX errors

by Adam Hitchcock

when I attempt to compile (read: typeset and view) a LaTeX document I get the following errors: /bin/bash: line 34: require_cmd: command not found /bin/bash: line 45: latexErrWarnHtml.py: command not found Click Here to Preview I am unable to figure out which script is responsible for these errors. If anybody has had simmilar problems how did you fix them, or if you know where these might be coming from then I could start looking there. Oh, and I am using the i-installer version of tex. Further more I would like to propose using '1>&2' in scripts to pipe output to the console where it can be more easily viewed for debugging purposes. -adam Adam Hitchcock Macintosh software at InfImp.net No trees were harmed in the sending of this message, however, otaking(a)mac.com | cell - 734.769.0085 | aim - AlfredHi | pgp keys a great number of electrons were severely inconvenienced.

19 years, 11 months

3
2
0 0

flash mode for Latex bundle?

by Jenny Harrison

The Latex file I am working on is getting so long that formatting is taking a full minute, even for small changes. I realize I could input chapters as separate files and not load them all each time, but I prefer not to do this for navigation purposes. I saw on Haris' blog, "I was editing an html file, and I used the internal html preview window that it has, and then I left the window open. The miracle that occurred is that as I continued editing, the preview window was automatically updated instantly! Without me even having to save the file!" This does not seem to work for the Latex bundle. But even if it did, the TM internal preview does not respond to pdfsync. So my wishful thoughts are for a "flash mode" for the Latex bundle that is compatible with pdfsync. So many dreams are coming true with all this good energy within this list, I thought I would ask... Jenny

19 years, 11 months

3
2
0 0

Wrap Text as Link with Title: Minor Revision

by Brett Terpstra

Just a small change to the regex to handle two part url's (i.e. site.com) which I had inadvertently ignored previously. Also limits the domain to 2-3 characters because it now recognizes anything joined by a dot (conjoined.twins). I thought this was easier than trying to list every possible domain in the regex.

19 years, 11 months

1
0
0 0

Solution Approach for Hypersearch in TM (Find All in Document)

by Hans-Joerg Bibiko

Dear all, maybe you know the bundle 'Find All in Document'. This script lists all occurrences for a specific search pattern as an HTML page. You can click on a line and you jump to that line in the document. I rewrote the script and I renamed it to 'Hypersearch'. (see attachment) Changes/Improvements: - case insensitive search - result is shown as a table with line numbers (i.e. a better line distinction) - search result within a line is highlighted using bold and italics - there is no need to save your file in beforehand - it is 'relatively' easy to change the code - the code is 'rather' unicode save (i.e. It is not a problem to find a Japanese string. Only some regular expressions are not supported yet.) - tabs and spaces are shown like the source code (tabs are replaced by four spaces) - < and > are shown correctly - displays the number of lines which match against the search pattern Problems: - I tried to implement to jump not only to the line but also to the right column but unfortunately it works only for ASCII. If there is e.g. a utf-8 'ö' or a Japanese character within the line the column number didn't fit. I used perl's pos() function but I get only the numbers of bytes. Hints are welcomed!! - Case insensitive search works but not for accented characters like ç, ä, é etc. You have to use e.g. the pattern 'ç|Ç' instead. - You cannot search for '§¢' and '¢§'. These strings are used internally. The access key is ctrl+shift+f. Implementation is done with CocoaDialog, grep, sed, and a bit perl within bash. If someone find some bugs or have improvements etc., please don't hesitate to write me! In other words, COMMENTS ARE WELCOMED! Best, Hans-Joerg Bibiko

19 years, 11 months

6
9
0 0

Wrap Text as Link with Title

by Brett Terpstra

Okay, this is my version of the wrap text as link command. It seems to be failing elegantly now, although I need some testing on other installations as there are some inconsistencies between my two machines. It recognizes a link in the clipboard, with or without the leading protocol, and grabs the title for the page off the net to insert as the title of the link. If there is no protocol on the link it will attempt to use http://. If the link is bogus or unreachable it will insert the link that it found but put "Unknown" for the title. Both the link and the title are tab-stopped. I have it set up under CTRL- SHIFT-L so that you can choose between the original and the link with title. Even if you cut out the title grabbing part, it's still seems like a better way to recognize a link in the clipboard and utilize it. Brett

19 years, 11 months

1
0
0 0

[OT] Creating Screencasts

by Niels Kobschätzki

Hi! I just was interested how you guys create screencasts. I looked a little bit around in the net but could only find Snapz X Pro which could do the task. Any cheap or free (as in beer) possibilities? Would have needed it the last days for making some instructions. Niels

19 years, 11 months

2
1
0 0

updates won't install

by Bob Koss

When I start TextMate, it downloads the latest update. I click on Install & Relaunch and get an "Install Failed" message. This has happened every day this week. I searched the archives and found a message that said this happens on non-admin accounts, but without a fix. I am an admin account, so something else must be going on. Anyone else seeing this or any advice? Bob

19 years, 11 months

2
6
0 0

Embedding shell variables

by Todd Breiholz

Is it possible to define a shell variable by referencing another shell variable? Here's an example of what I am trying to do: (These are project variables) TM_FLEX_ROOT=$TM_PROJECT_DIRECTORY/flex TM_SERVICES=$FLEX_ROOT/config/WEB-INF/flex/services-config.xml Thanks Todd

19 years, 11 months

3
6
0 0

Improving the Erlang bundle: Start and Stop matching at different levels

by Mickael Remond

Hello, I have been playing with the existing Erlang bundle to improve it a bit and I have trouble adding code folding. Here is a simple Erlang function: start(Var) -> test(Var), %% Comment ok. The last dot marks the end of the function. I know that the end of the function is not at the same indent level that the start marker, but this is always the case in Erlang. I try to match the end marker, with any number of spaces / tabs at the beginning of the line but at best, start and stop marks are put in place but not foldable. I suppose this is because Textmate does some checks on the number of spaces or tabs but is there a way to ignore this match ? If not, is there an estimated release date for this feature ? Thank you ! -- Mickaël Rémond http://www.process-one.net/

19 years, 11 months

2
2
0 0

Adding new TODO scope across languages?

by Dan Sandler

As a recovering vimaholic, I miss special highlighting of (FIXME|TODO| XXX) in my source. (I realize that I can get a list of TODOs with C- S-t, but it's nice to have things like "XXX: broken" or "FIXME dsandler:" leap out at me as I'm skimming code.) I seem to be able to hack these rules into individual languages; for example, in Python, I changed the comment.line.number-sign.py pattern thusly: { name = 'comment.line.number-sign.py'; begin = '#'; end = '$'; patterns = ( { name = 'todo.todo'; match = '(TODO)( \S*:|:?)'; }, { name = 'todo.fixme'; match = '(FIXME)( \S*:|:?)'; }, { name = 'todo.xxx'; match = '(XXX)( \S*:|:?)'; }, { name = 'todo.changed'; match = '(CHANGED)( \S*:|:?)'; }, ); }, (This seemed to require changing Python's line-comment pattern from a 'match' to a begin/end kind of thing.) With these scopes, you can now set all TODOs to a given color, or pick different colors for each, etc. (perhaps matching the colors up with those in the "Show TODO List" command). So, is there any way to apply this kind of new scope to to (comments in) all languages at once, or do I (or the TextMate BDFL) have to go and integrate it into each one by hand? Thanks, --ds

19 years, 11 months

2
1
0 0

crtl-esc not activating - my solution

by ira cary blanco

Hello everyone, The short story is that running ARD (Apple Remote Desktop) Client is the culprit that is stealing the key sequence. I don't know why ARD steals the key sequence, but turning it off (System Preference - under Sharing) eliminates this problem for me. I'd like to run the ARD client, so if anyone knows how to have the ARD client run without it stealing the crtl-esc key sequence, I'd like to hear about it. I hope this ends the problem for others as well. peace, icb Ira Cary Blanco Marketing & Media Samson Technologies Corp. Samson | Hartke | Zoom voice: 631.784.2200 x107 fax: 631.784.2201 email: blanco(a)samsontech.com web: samsontech.com

19 years, 11 months

4
3
0 0

MODx Syntax Highlighting

by Max

Hi, I've been using TM for quite some time now and it's a great editor. The last weeks I had to write some code for a site using MODx (www.modxcms.com) MODx uses some special tags: [[Snippet]] [!Noncaching-Snippet!] {{Chunk}} [~link~] [*attribute*] I added some code to the HTML-Bundle for recognizing this which works quite good. modx = { patterns = ( { name = 'meta.tag.inline.modx.snippet'; begin = '(\[\[)(\w*)(.*?)'; end = '(\]\])'; captures = { 1 = { name = 'punctuation.modx.snippet'; }; 2 = { name = 'entity.name.tag.modx.snippet'; }; }; }, { name = 'meta.tag.inline.modx.snippet.nocache'; begin = '(\[\!)(\w*)(.*?)'; end = '(\!\])'; captures = { 1 = { name = 'punctuation.modx.nocachesnippet'; }; 2 = { name = 'entity.name.tag.modx.snippet.nocache'; }; }; }, { name = 'meta.tag.inline.modx.link'; begin = '(\[\~)(\w*)'; end = '\~\]'; captures = { 1 = { name = 'punctuation.modx.link'; }; 2 = { name = 'entity.name.tag.modx.snippet.nocache'; }; }; }, { name = 'meta.tag.inline.modx.setting'; begin = '(\[$)(\w*)'; end = '($\])'; captures = { 1 = { name = 'punctuation.modx.setting'; }; 2 = { name = 'entity.name.tag.modx.setting'; }; }; }, { name = 'meta.tag.inline.modx.chunk'; begin = '({{)(\w*)'; end = '(}})'; captures = { 1 = { name = 'punctuation.modx.chunk'; }; 2 = { name = 'entity.name.tag.modx.chunk'; }; }; }, { name = 'meta.tag.inline.modx.attribute'; begin = '(\[\*)(\w*)'; end = '(\*\])'; captures = { 1 = { name = 'punctuation.modx.attribute'; }; 2 = { name = 'entity.name.tag.modx.attribute'; }; }; }, { name = 'variable.parameter.modx'; match = '(&\w+)='; }, { name = 'string.quoted.modx'; begin = '`'; end = '`'; }, { name = 'invalid.illegal.modx.bad-snippetcall'; match = '(\[[\[\!])(\w+)(\s+)(.+?)([\!\]]\])'; }, ); }; Now my problem is: There are some Snippet-calls which take parameters: [[Snippet? &parameter=`value` &parameter2=`value2`]] I tried to define the parameters as variable.parameter.modx and the values as string.quoted.modx but TM doesn't seem to recognize this. Also when I write a MODx Tag into a html-string (e.g. <a href="[(base_url)]">...) TM will ignore it. Last I tried to highlight invalid snippet calls (e.g. [[Snippet &param... (missing ?) or [[Snippet? &param='foo' (normal quotation mark)) but this won't work either. Can you tell me what I did wrong? :) Regards Max Lohrmann

19 years, 11 months

2
3
0 0

Strange whitespace behaviour?

by Sven Fuchs

I'd be super-happy if someone could help me with the following Textmate behaviour. a. The cursor is in any line that has more characters than the previous line, like so: line 1 | ¬ line 2 | 12345¬ When the cursor is at the end (column 6) of line 2 and moved up one line then it stays in column 6, i.e. behind the ¬ end-of-line marker of line 1. Like this: line 1 | ¬ x line 2 | 12345¬ b. When now return/enter is hit so that a new line gets inserted then there are also spaces inserted (filling up the place between the end- of-line marker and the previous place of the cursor) in line 1. line 1 | ¬ line 2 | ¬ line 3 | 12345¬ Is there any reasoning behind this? It feels really strange to me and conflicts with several editing habits of mine. While editing code the insertion of whitespace in line 1 actually leads to masses of whitespace cluttered all over the place. I can't imagine that this is intentional. :) Any hints? -- sven fuchs fon: +49 (58 45) 98 89 58 artweb design fax: +49 (58 45) 98 89 57 breite straße 65 www: http://www.artweb-design.de de-29468 bergen mail: svenfuchs(a)artweb-design.de -- This message has been scanned for viruses and dangerous content by MailScanner, and is believed to be clean.

19 years, 11 months

2
2
0 0

Markdown with Textmate and Spotlight: What file extension is best?

by Tom Offermann

(This isn't specifically a Textmate question, but I know a lot of Textmate users use Markdown, so I was hoping someone could help.) How do I name Markdown files so that they are: 1) Recognized automatically by Textmate as Markdown files when you open them, 2) Indexed automatically by Spotlight, 3) Use a unique extension (like .markdown) rather than a generic .txt extension? Right now, if I use the default .markdown extension, the file isn't indexed by Spotlight. If I save a Markdown file without any extension, it's neither indexed by Spotlight, nor is it recognized by Textmate as a Markdown file. A .txt extension is recognized by Textmate and indexed by Spotlight, but I was hoping to use a different file extension--one that could distinguish Markdown files from other text files. How do other people solve this problem? Thanks, Tom **

19 years, 11 months

4
3
0 0

Insert Color Revised (help needed)

by Brett Terpstra

Okay, I'm trying to keep this one simple and meet my own needs at the same time. First of all, the insert color command didn't recognize abbreviated (3 character) RGB color codes. This had 2 drawbacks: The tab stop inserted by any of the CSS commands, when used in combination with Insert Color, would add an extra # sign and it wouldn't properly set the default color when it loaded the color picker. This revised command is my usual unskilled kludge, but it recognizes both 3 and 6 character rgb strings, strips the # sign if unnecessary, and if the resulting hex code is a series of double repeating characters it will abbreviate (BBAADD becomes BAD). I wanted to use squeeze to do this in Ruby, but had trouble with colors like 0000FF, where it would just give back 0F. So I made a mess of it. It works, but I'd really like to see it cleaned up (I know Haris could do this in about 4 lines of code). So if anyone has the time... It'd be great to learn a new algorithm to handle this. As a side note, I've been using Color Schemer Studio to create websmart palettes. I can drag directly from the current color selection into textmate, but it was less convenient than the color picker. So I've been creating the palettes, and then importing them into the color picker. That's where this command came from... Thanks, Brett

19 years, 11 months

2
7
0 0

Bundle for Ruby RSpec

by Christopher Petrilli

I've become quite a fan of the Rspec BDD framework, and so I whipped up a bunch of snippets to make my life easier. If anyone wants them, they're here: http://blog.amber.org/2006/10/16/textmate-bundle-for-rspec/ Chris -- | Christopher Petrilli | petrilli(a)gmail.com

19 years, 11 months

1
0
0 0

scoping issue in html/php ??

by David Clark

Suppose I am in the html grammar with a php block, like: <?php echo 'my insertion point is here'; ?> my expectation is to have ctrl-return produce <br /> rather than the \n given that I am within the '". am I wrong on this ? -- dc ----- David Clark Web Specialist Institute for Community Inclusion (http://www.communityinclusion.org/) david.clark(a)umb.edu (617) 287-4318

19 years, 11 months

4
3
0 0

Latex: completion with esc not working

by Christopher Brewster

For a few days now, completion with esc has not been working. What could be the cause? Conflict with other modules? or what? It does not work with ref{} or cite{}. Any suggestions appreciated. Christopher Brewster ***************************************************** Natural Language Processing Group, Department of Computer Science, University of Sheffield

19 years, 11 months

4
18
0 0

Re: Executing command on all files in a project AND using TM variables in a search and replace

by James Fishwick

Awesome, apreciate it Allan. Very impressed you're on here answering questions. Consider me a an "offical" textmate user now! -J > From: Allan Odgaard <throw-away-1(a)macromates.com> > Date: October 20, 2006 1:42:15 AM EDT > To: TextMate users <textmate(a)lists.macromates.com> > Subject: Re: [TxMt] Executing command on all files in a project AND > using TM variables in a search and replace > Reply-To: TextMate users <textmate(a)lists.macromates.com> > > > On 19. Oct 2006, at 22:12, J Fishwick wrote: > >> Command: >> eval arr=("$TM_SELECTED_FILES") >> for (( i = 0; i < ${#arr[@]}; i++ )); do >> perl -pe 'while ($string =~ m/mc\d+(.*\n.*True)/g) {$string =~ >> s/mc\d+/tf$TM_FILENAME/g;}'; >> done >> >> Input: Entire Doc >> Output: Replace selected text > > You need to set input/output to none/discard (or show tool tip, or > maybe show as HTML and make your command output some progress info). > > Then your actual command needs to load the file itself, it already > iterators over the selected files, it just doesn’t tell perl to > load/overwrite each of them. > > So a simple example would instead be: > > eval arr=("$TM_SELECTED_FILES") > for f in "${arr[@]}"; do > perl -i.bak -pe 's/bar/bar/' "$f" > done > rescan_project # do this after you make changes to files, so TM > will rescan > > This will replace foo with bar in all selected files (and create > a .bak file with the old contents). > > Two other things: 1) inside single quoted strings, shell variables > are not expanded, so if you want to use $TM_… then you need to use > double quotes, and 2) TM_FILENAME is the filename of the file open > when you called the file, it won’t update inside the loop. Here you > would instead use the current file given by the loop (in my example > $f). > On Oct 20, 2006, at 7:43 AM, textmate-request(a)lists.macromates.com wrote: > Send textmate mailing list submissions to > textmate(a)lists.macromates.com > > To subscribe or unsubscribe via the World Wide Web, visit > http://lists.macromates.com/mailman/listinfo/textmate > or, via email, send a message with subject or body 'help' to > textmate-request(a)lists.macromates.com > > You can reach the person managing the list at > textmate-owner(a)lists.macromates.com > > When replying, please edit your Subject line so it is more specific > than "Re: Contents of textmate digest..." > Today's Topics: > > 1. Re: Executing command on all files in a project AND using TM > variables in a search and replace (Allan Odgaard) > 2. Re: Latex: completion with esc not working (Christopher > Brewster) > 3. Re: TODO problem (Jasper van der Meulen) > > From: Allan Odgaard <throw-away-1(a)macromates.com> > Date: October 20, 2006 1:42:15 AM EDT > To: TextMate users <textmate(a)lists.macromates.com> > Subject: Re: [TxMt] Executing command on all files in a project AND > using TM variables in a search and replace > Reply-To: TextMate users <textmate(a)lists.macromates.com> > > > On 19. Oct 2006, at 22:12, J Fishwick wrote: > >> Command: >> eval arr=("$TM_SELECTED_FILES") >> for (( i = 0; i < ${#arr[@]}; i++ )); do >> perl -pe 'while ($string =~ m/mc\d+(.*\n.*True)/g) {$string =~ >> s/mc\d+/tf$TM_FILENAME/g;}'; >> done >> >> Input: Entire Doc >> Output: Replace selected text > > You need to set input/output to none/discard (or show tool tip, or > maybe show as HTML and make your command output some progress info). > > Then your actual command needs to load the file itself, it already > iterators over the selected files, it just doesn’t tell perl to > load/overwrite each of them. > > So a simple example would instead be: > > eval arr=("$TM_SELECTED_FILES") > for f in "${arr[@]}"; do > perl -i.bak -pe 's/bar/bar/' "$f" > done > rescan_project # do this after you make changes to files, so TM > will rescan > > This will replace foo with bar in all selected files (and create > a .bak file with the old contents). > > Two other things: 1) inside single quoted strings, shell variables > are not expanded, so if you want to use $TM_… then you need to use > double quotes, and 2) TM_FILENAME is the filename of the file open > when you called the file, it won’t update inside the loop. Here you > would instead use the current file given by the loop (in my example > $f). > > > > > > > > From: Christopher Brewster <C.Brewster(a)dcs.shef.ac.uk> > Date: October 20, 2006 6:35:06 AM EDT > To: TextMate users <textmate(a)lists.macromates.com> > Subject: Re: [TxMt] Latex: completion with esc not working > Reply-To: TextMate users <textmate(a)lists.macromates.com> > > > >> On 19 Oct 2006, at 23:13, Charilaos Skiadas wrote: >> >>> Is this what they should be? >>> >> That looks right. Is this a saved file? Try it with both saved >> files as well as untitled documents. > > The problem is specific to that project I am afraid. There is no > problem with other latex files in other folders. > >> Is it part of a project, via TM_LATEX_MASTER? > > yes it is >> Are you setting TM_LATEX_BIB? (You don't have to, just checking >> your settings) > > Checking this I realised for Bibtex the path had changed. So the > \cite{} case is solved. > But the \ref{} case is still not working (in this project). > >> How are you testing that it is not working? > > for \ref{} > put cursor in braces and press esc > >> Does the other completion command work, the one via opt-esc? > This does nothing. > >> Make sure that you are up to date, I recently fixed a problem >> someone else had that sounds possibly similar, though his was with >> the Command Completion command. > I am up to date. > > Thanks, > > Christopher > > > ______________________________________________________________________ > For new threads USE THIS: textmate(a)lists.macromates.com > (threading gets destroyed and the universe will collapse if you don't) > http://lists.macromates.com/mailman/listinfo/textmate > > > > > From: Jasper van der Meulen <jasper(a)logt.nu> > Date: October 20, 2006 7:43:02 AM EDT > To: TextMate users <textmate(a)lists.macromates.com> > Subject: Re: [TxMt] TODO problem > Reply-To: TextMate users <textmate(a)lists.macromates.com> > > > I don't think you understand what i mean... > > I've got it in a picture now .. > > <screenshot 2.png> > however > Regards J. > > > On 20-okt-2006, at 7:26, Allan Odgaard wrote: > >> On 20. Oct 2006, at 00:02, Jasper van der Meulen wrote: >> >>> Could it be that a project is different for the TODO ? >> >> It visits all files found under TM_PROJECT_DIRECTORY (using the >> globally configured folder reference patterns for what to skip). >> >> >> >> >> _____________________________________________________________________ >> _ >> For new threads USE THIS: textmate(a)lists.macromates.com >> (threading gets destroyed and the universe will collapse if you >> don't) >> http://lists.macromates.com/mailman/listinfo/textmate > > > _______________________________________________ > textmate mailing list > textmate(a)lists.macromates.com > http://lists.macromates.com/mailman/listinfo/textmate

19 years, 11 months

1
0
0 0

How to use XeLaTeX

by Alain Matthes

hello:) In Typeset & View (PDF) i don't understand that : # Set up TeX compiler, fallback to xelatex if document indicates it if grep -Esq '\\usepackage{.*(xunicode|fontspec)|program=xelatex' "$M" then DEF_TEX=xelatex else DEF_TEX=pdflatex What is the exact syntax to use XeLaTeX ? Thanks Greetings Alain

19 years, 11 months

2
1
0 0

GTD vs GTD2 vs GTDalt?

by Alan Schmitt

Hello, I'm currently using kGTD as my tool of choice, but a pure text-based solution looks very attracting. I see there are several bundles mentioning GTD and I was wondering what were their differences and if they were all maintained. Additionally, is someone using one of these bundles and somehow synchronizing their GTD setup to a Palm? If so, I'd be delighted to hear about it. Thanks a lot, Alan -- Alan Schmitt <http://alan.petitepomme.net/> The hacker: someone who figured things out and made something cool happen. .O. ..O OOO

19 years, 12 months

5
14
0 0

SQL Problems

by Mark Lacas

Hello, I'm trying to get the MySQL bundle working so I can browse tables. I get this on my MacBook Pro: Traceback (most recent call last): File "/Applications/Document/ TextMate.app/Contents/SharedSupport/Bundles/SQL.tmbundle/Support/bin/ tableBrowser.py", line 284, in ? sys.exit(main()) File "/Applications/ Document/TextMate.app/Contents/SharedSupport/Bundles/SQL.tmbundle/ Support/bin/tableBrowser.py", line 109, in main listTables (dbName,dbHost,dbPort,serverType,passwd,dbUser) File "/Applications/ Document/TextMate.app/Contents/SharedSupport/Bundles/SQL.tmbundle/ Support/bin/tableBrowser.py", line 130, in listTables mycon = MySQLdb.connect(db=dbName,host=dbHost,port=int (dbPort),user=dbUser,passwd=passwd) NameError: global name 'MySQLdb' is not defined I tried using tablebrowser.py standalone and it failed due to no MySQLdb module for Python. Downloaded and installed MySQLdb and now Python works properly with the module and MySQL. Alas, TextMate still can't find MySQLdb and fails with the same error. I note that the first line of tablebrowser.py is: #!/usr/bin/env python My python is at: /usr/bin/python Is TextMate using some other Python than my native one? If not, why can I interactively use Python with MySQL, but TextMate won't work. I have all the TM environment variables set so I don't think that is it. Thoughts? Thanks, ml

19 years, 12 months

7
21
0 0

Executing command on all files in a project AND using TM variables in a search and replace

by J Fishwick

In all the files in my project, where a certain string of characters is present, I'm trying to replace a string with the a part of the file name containing said string. For example, files are called ace[1-12].xml, and for everytime there is a the block: "mc\d+(.*\n.*True)" I want to replace mc\d+ with tf0(number prefix from filename). I know this hits on a couple more adavanced concepts I don't have a full grasp on yet, but this editor is goading me on to learn regex and basic command line skills... The command I have now is: Save: nothing Command: eval arr=("$TM_SELECTED_FILES") for (( i = 0; i < ${#arr[@]}; i++ )); do perl -pe 'while ($string =~ m/mc\d+(.*\n.*True)/g) {$string =~ s/mc\d+/tf$TM_FILENAME/g;}'; done Input: Entire Doc Output: Replace selected text It's choking big time... any pointers to the numerous places I'm screwing up? Thanks~

19 years, 12 months

2
1
0 0

TM_SUPPORT_PATH is incorrect??

by Hans-Joerg Bibiko

Hi, I just built up a Command as BASH which calls a perl script via TM_BUNDLE_SUPPORT. The perl script is calling CocoaDialog via $ENV{'TM_SUPPORT_PATH'} and so forth. Everything works fine. Then I installed the same tmBundle at an other Mac. Same OS and TM version. The funny thing now is that the perl script cannot call CocoaDialog via TM_SUPPORT_PATH because TM_SUPPORT_PATH is set to /Users/Bibiko/Library/Application Support/TextMate/Support. I promise that I didn't set this variable to that path. On the other hand I tried the bundle command 'Find In all Document' which is a ruby script. Here it works with the variable TM_SUPPORT_PATH. !!??!! The only difference is that this ruby script is not written as a separate file. Please, help is needed. If I use the command 'Show all TM.*' the TM_SUPPORT_PATH is also set to this weird path. Thanks in advance Hans ---------------------------------------------------------------- This message was sent using IMP, the Internet Messaging Program.

19 years, 12 months

3
3
0 0

Close All Tabs

by Dave Grijalva

Is there a way to close all open tabs in a project without closing the project? Is there some way I could create this? As a macro maybe? I'd like to be able to map this to something like cmd+shift+W. -dave

19 years, 12 months

2
2
0 0

TM variable substitution across all project files

by James Fishwick

In all the files in my project, where a certain string of characters is present, I'm trying to replace a string with the a part of the file name containing said string. For example, files are called ace[1-12].xml, and for everytime there is a the block: "mc\d+(.*\n.*True)" I want to replace mc\d+ with tf0(number prefix from filename). I know this hits on a couple more adavanced concepts I don't have a full grasp on yet, but this editor is goading me on to learn regex and basic command line skills... The command I have now is: Save: nothing Command: eval arr=("$TM_SELECTED_FILES") for (( i = 0; i < ${#arr[ <at> ]}; i++ )); do perl -pe 'while ($string =~ m/mc\d+(.*\n.*True)/g) {$string =~ s/mc\d+/tf$TM_FILENAME/g;}'; done Input: Entire Doc Output: Replace selected text It's choking big time... any pointers to the numerous places I'm screwing up? Thanks~

19 years, 12 months

1
0
0 0

Drag problem with LaTeX bundle

by Alain Matthes

hello if i create a new file with Latex bundle and if i drag a .pdf file, the result is correct \begin{figure}[htbp] \begin{center} \includegraphics[height=3in]{/Users/ego/Desktop/ AmeriqueNordES2005.pdf} \end{center} \caption{caption} \label{fig:label} \end{figure} but if i save the .tex file and i want to drag again a .pdf file : the result is /usr/lib/ruby/1.8/pathname.rb:529:in ??? strange Thanks for a solution Alain Matthes TextMate Version 1.5.3 (1292)

19 years, 12 months

4
10
0 0

help needed switching to HTML mode

by Yariv Sadan

Hi, Sorry for this basic question, but I'm a textmate newbie and I just couldn't find a way to do this. I was editing a HTML file and then I accidentally pressed some key combination and now the syntax highlighting is messed up. I tried finding a way of going back to HTML highlighting mode to no avail. How do I do this? Thanks, Yariv

19 years, 12 months

2
2
0 0

Kinda “etags” for Fortran…

by guerom00

Hi there, One thing I miss from my XEmacs days, was the “etags” command which is very useful when you have a directory full of Fortran files… If, in a fortran file, you had call foobar(blah blah) It would automatically open the file in which the function foobar was defined. So I made a shell script which mimic that. http://guerom00.free.fr/clutter/Fortran_Tags.sh Just create a new command which reads : Wherever_you_put_the_script/Fortran_Tags.sh "$TM_DIRECTORY"\\ "$TM_CURRENT_WORD" &>/dev/null & It will create a tags file named “.tags” in the current directory. I know it's rather ugly and not perfect but seems to work OK… Hopefully one person or two will find this usefull :-D

19 years, 12 months

1
0
0 0

Fortran, compile, make, closeWindow…

by guerom00

Hi there, I made myself a simple script to compile Fortran programs using the “make” command. I wanted the compilation window to automatically close on successful compilation, so this script basically reads : htmlHeader "Compiling current programs using Make" echo "<h1>Starting Fortran Compile</h1>" echo cd "$TM_DIRECTORY" make|pre status=$? echo "status = "${status} if [[ "${status}" -ne "0" ]]; then echo "<h1>Compilation Failed</h1>" else echo "<h1>Compilation Successful</h1>" # closeWindow fi htmlFooter The problem is that, even when the compilation fails, the $status is equal to 0… http://img220.imageshack.us/img220/8341/image1po1.jpg What did I do wrong ? How do I fix this ? Thanks in advance. PS : I don't know if I'm the only one, but using Safari for the RSS feed for this mailing list, I receive EVERY message twice… Rather annoying…

19 years, 12 months

4
4
0 0

emacs feature missed (or dont know it exists in textmate)

by Arman Garakani

Emacs keeps a stack of your "yanks" or cut/copies. Allowing you to re paste an earlier copy/cut again.

19 years, 12 months

2
1
0 0

Re: [TxMt] Fortran, compile, make, closeWindow?

by Jay Soffian

>> [...] >> make|pre >> [...] >> The problem is that, even when the compilation >> fails, the $status is equal to 0 >> > > The problem is that when you do ‘foo|bar’ then the result of the > entire command is that of the last command in the chain. You can use the bash PIPESTATUS array. j.

19 years, 12 months

1
0
0 0

UTF-8 line breaks

by Jeremy Bernstein

I've come across this a couple of times now: a file which looks fine in TextEdit or BBEdit loses its line breaks when opened in TextMate. Looking at the problem file in HexEdit, the following Hex is being used for linebreaks: E2 80 A8, which appears to be a UTF-8 linebreak, based on some preliminary googling. Saving a short UTF-8 file in TM, the linebreaks are: 0A (\n). Would it be possible for TM to support this format of linebreaks, at least on read? jb

19 years, 12 months

3
2
0 0

A new "Join Line With Next" macro

by Ciarán Walsh

I work with a lot of code which has 'dropped' braces, such as if () { } else { } I personally prefer the K&R style, such as if () { } else { } I made this new macro to make conversions easier - it simply keeps a space before/after the brace when joining lines - otherwise joining the lines would result in if (){ }else{ } I added it as a second macro with a scope of just "source", so text files won't be affected. Thoughts? Cheers, Ciarán

19 years, 12 months

2
2
0 0

TextMate still holding onto Volumes

by John Tsombakos

Hi, I had written about this before, but I am still seeing this. If I have a mounted volume (Either AFP, or in the latest case NFS), and I've opened some files from that volume (and have subsequently closed them), when I go to dismount that volume, I get an error in the Finder stating that the volume is in use. It always end up being Textmate. Using the terminal, I can see: john$ lsof | grep TextMate TextMate 376 john cwd VDIR 26,9 4096 343647 /Volumes/10.1.1.104/public_html (The volume that is mounted is just /Volumes/10.1.1.104/, public_html is the directory I happened to open a file from.) The only way around this is to quit TextMate. Any ideas why TM in holding onto the volume like that? Thanks, jt

19 years, 12 months

5
13
0 0

Re: textmate Digest, Vol 25, Issue 58

by Claus Haslauer

Hi Allan, thanks for your help! this is a follow up to a newsgroup post from yesterday. I am having problems with the blogging bundle. I turned the xmlrpc logging on - see below. On 16-Oct-06, at 11:58 PM, textmate-request(a)lists.macromates.com wrote: > On the server, you need to create a writable (by your apache user) > directory for the uploads and set that in the WordPress preferences. "the uploads" meaning for example jpg files that I would upload with a blog post? I can create a directory on my server (that is not my own apache server, but a hosted one) and I can probably find the corresponding setting in wordpress... but I guess the following issue should be resolved first. > > Is this a 100% untampered WordPress 2.0 install? > > In your install of WP is a xmlrpc.php file, set $xmlrpc_logging = > 1; in that file and check what the XML-RPC log says when you post, > i.e. if TM provides the post in two chunks. If it does, it is your > WP install which needs fixing. The xmlrpc.log looks like this. With "two chunks" - do you mean the part highlighted in red? 2006-10-17 23:05:49 Input: <?xml version="1.0" ? ><methodCall><methodName>metaWeblog.editPost</ methodName><params><param><value><string>50</string></value></ param><param><value><string>Claus</string></value></ param><param><value><string>Butterfly2010</string></value></ param><param><value><struct><member><name>mt_allow_pings</ name><value><string>open</string></value></ member><member><name>mt_allow_comments</name><value><string>open</ string></value></member><member><name>title</ name><value><string>Blogging via TM</string></value></ member><member><name>categories</ name><value><array><data><value><string>water in the media</string></ value></data></array></value></member><member><name>description</ name><value><string>This is a blog entry written from TM Holladrihia</string></value></member></struct></value></ param><param><value><boolean>1</boolean></value></param></params></ methodCall> 2006-10-17 23:05:49 Output: (MW) Edited ! ID: 50 2006-10-17 23:05:50 Input: <?xml version="1.0" ? ><methodCall><methodName>metaWeblog.getPost</ methodName><params><param><value><string>50</string></value></ param><param><value><string>Claus</string></value></ param><param><value><string>Butterfly2010</string></value></param></ params></methodCall> 2006-10-17 23:06:38 Input: <?xml version="1.0" ? ><methodCall><methodName>metaWeblog.editPost</ methodName><params><param><value><string>50</string></value></ param><param><value><string>Claus</string></value></ param><param><value><string>Butterfly2010</string></value></ param><param><value><struct><member><name>mt_allow_pings</ name><value><string>open</string></value></ member><member><name>mt_allow_comments</name><value><string>open</ string></value></member><member><name>title</ name><value><string>Blogging via TM</string></value></ member><member><name>categories</ name><value><array><data><value><string>water in the media</string></ value></data></array></value></member><member><name>description</ name><value><string>This is a blog entry written from TM Holladrihia </string></value></member><member><name>mt_text_more</ name><value><string> This now should be below the cut! It better damn be!</string></ value></member></struct></value></param><param><value><boolean>1</ boolean></value></param></params></methodCall> 2006-10-17 23:06:38 Output: (MW) Edited ! ID: 50 Thanks again, Claus

19 years, 12 months

2
1
0 0

how to disable spell checking

by Francois

Hello all, I am just installing TextMate on my new iMac and I face la little problem : by default, spell checking is activated. My question : how can I disable spell checking ? Thanks G ___________________________________________________________________________ Découvrez une nouvelle façon d'obtenir des réponses à toutes vos questions ! Demandez à ceux qui savent sur Yahoo! Questions/Réponses http://fr.answers.yahoo.com

19 years, 12 months

3
3
0 0

Tcl grammar patch

by Oscar Bonilla

Hi folks, Tcl's comment syntax is such that it allows comments to extend to multiple lines by escaping the new-line. E.g. # this is a \ two line comment The current Tcl grammar does not catch this and does not apply the comment tag to the second line. The following Patch fixes that, and it also fixes something having to do with single quotes... I can't remember. Now that differences in preferences are stored as tmDeltas, what's a good way to see diffs between what I have and what is in the grammar? I assume that if I attach my tmDelta for Tcl that's enough, right? Thanks, -Oscar -- pgp fingerprint: BC64 2E7A CAEF 39E1 9544 80CA F7D5 784D FB46 16C1

19 years, 12 months

2
1
0 0

AUtomatic line break with textmate ?

by Erwan David

How can I get a real automatic line break in with textmate ? ie. a mode where at end of line a line break is REALLY inserted in the text, not just a presentation trick. -- Erwan David

19 years, 12 months

4
14
0 0

Re: crtl-esc not activating - my solution

by ira cary blanco

You might need to logout/restart/fast-user-switch after ARD sharing turning it off before you regain control of crtl-esc NOTE, I've also found out that the ARD administrator application ALSO grabs/blocks this keystroke. So if you're ARD sharing is off, but you're running the ARD administrator application, crtl-esc will not work in TextMate. I'm not an Apple Developer, nor am I sure this is a bug with ARD (it may be intentional), so I'm not comfortable submitting a bug report. If you would like to submit it if you have the same results, be my guest. - Ira On Oct 16, 2006, at 5:48 AM, textmate-request(a)lists.macromates.com wrote: > From: Caius Durling <nemo8686(a)mac.com> > Date: October 16, 2006 2:25:59 AM EDT > To: TextMate users <textmate(a)lists.macromates.com> > Subject: Re: [TxMt] crtl-esc not activating - my solution > Reply-To: TextMate users <textmate(a)lists.macromates.com> > > >> The short story is that running ARD (Apple Remote Desktop) Client >> is the culprit that is stealing the key sequence. >> >> I don't know why ARD steals the key sequence, but turning it off >> (System Preference - under Sharing) eliminates this problem for me. > > I open System Preferences, untick ARD sharing in the sharing > prefpane, quit System Preferences, Relaunch TextMate, and it still > doesn't work when I hit ⌃⎋. > > Have you rebooted/logged out after turning it off or anything? > >> I'd like to run the ARD client, so if anyone knows how to have the >> ARD client run without it stealing the crtl-esc key sequence, I'd >> like to hear about it. > > Possibly submit this as a bug to apple: http://developer.apple.com/ > bugreporter/ > > Caius

19 years, 12 months

1
0
0 0

blogging bundle problems

by Claus Haslauer

Hi, I just started to try out the blogging bundle. My blog runs under wordpress 2.0 I watched the screencast. Fetching blog entries works. Editing and posting them works. However, two things (so far) don't work" 1) When I drag a picture into the message in TextMate, this error message occurs: Error uploading image. Check your configuration and try again. 2) When I use cut and the tab trigger, this line gets inserted, but it doesn't fold in the posted blog entry like it should. The result is like the cut line wasn't there... Any ideas why those two issues arise? I'm not exactly sure what an API endpoint is... (this is where some comments in http://macromates.com/blog/archives/2006/06/19/blogging-from-textmate/ lead to) right now I set my blog adress in com.macromates.textmate.blogging.txt to http://<USERNAME>/<abc.net>/xmlrpc.php where <USERNAME> is the username I use in wordpress <abc.net> is the domain name, where the blog is. using http://<USERNAME>/www.<abc.net>/xmlrpc.php or http://<USERNAME>/<abc.net>/wordpress/xmlrpc.php make things worse Thanks, Claus

19 years, 12 months

3
2
0 0

Re: [TxMt] remote editing with textmate

by Bill Duenskie

I would definately need write and create ability, that stinks. Is there a program that can be purchased that would allow me to mount an FTP with read, write and create? Thanks! ----- Original Message ---- From: Helge Hartmann <helge.hartmann(a)gmx.de> To: TextMate users <textmate(a)lists.macromates.com> Sent: Tuesday, October 10, 2006 4:03:13 AM Subject: Re: [TxMt] remote editing with textmate The problem is, that the finder only mounts ftp server read-only. Helge Am 10.10.2006 um 06:11 schrieb Dave Grijalva: the mac can do this natively. in finder, choose Go > Connect to Server... (cmd+K). You can mount NFS, SMB, and FTP. Sadly, there is no SFTP or FTPS support. -dave On 10/9/06, Bill Duenskie <bduenskie(a)yahoo.com> wrote: I know Textmate doesn't have remote editing built in, but is there a program that is similar to www.webdrive.com on a mac? Basically webdrive allowed you to connect to a FTP server and map the connection to a drive. Can anyone recommend a similar program on a mac? ______________________________________________________________________ For new threads USE THIS: textmate(a)lists.macromates.com (threading gets destroyed and the universe will collapse if you don't) http://lists.macromates.com/mailman/listinfo/textmate ______________________________________________________________________ For new threads USE THIS: textmate(a)lists.macromates.com (threading gets destroyed and the universe will collapse if you don't) http://lists.macromates.com/mailman/listinfo/textmate ______________________________________________________________________ For new threads USE THIS: textmate(a)lists.macromates.com (threading gets destroyed and the universe will collapse if you don't) http://lists.macromates.com/mailman/listinfo/textmate

19 years, 12 months

3
2
0 0

Re: Re: [TxMt] blogging bundle problems

by Claus Haslauer

Hello Brett, hello list, sorry, the @ symbol was actually there. I accidentally must have deleted it while writing the message. The cut tab trigger still does not work. Where am I supposed to put it (I am resorting to really weired questions... but I really have no idea why it doesn't work... something must be right, because it fetches the posts ok)? So far I do this: blah blah <retun> cut <tab> [inserts curser into a new line] <return> blah blah After I tell textmate to post to the blog, the post shows up. Both in the blog itself and in the individual post it shows up as if I had written blah blah <return> blah blah In textmate after posting, the scissors symbols are gone, and there are 4 empty lines instead. Thanks for your help, Claus On 16-Oct-06, at 8:00 AM, textmate-request(a)lists.macromates.com wrote: > From: Brett Terpstra <brett(a)circlesixdesign.com> > Date: October 16, 2006 5:53:47 AM EDT (CA) > To: TextMate users <textmate(a)lists.macromates.com> > Subject: Re: [TxMt] blogging bundle problems > Reply-To: TextMate users <textmate(a)lists.macromates.com> > > > > On Oct 15, 2006, at 9:00 PM, Claus Haslauer wrote: > > [...] >> right now I set my blog adress in >> com.macromates.textmate.blogging.txt to >> http://<USERNAME>/<abc.net>/xmlrpc.php >> where >> <USERNAME>is the username I use in wordpress >> <abc.net>is the domain name, where the blog is. > [...] > > You want to replace the slash with an @ symbol after the USERNAME. > > That should work for you. > > Brett > Claus Haslauer: Groundwater Resources Management, University of Waterloo chaslaue(a)scimail.uwaterloo.ca | +1 (519) 888 4567 x.37232 | icq - 126499030

19 years, 12 months

1
0
0 0

Re : [TxMt] how to disable spell checking

by Francois

OK thanks a lot F ----- Message d'origine ---- De : Michael Reece <mreece(a)vinq.com> À : TextMate users <textmate(a)lists.macromates.com> Envoyé le : Lundi, 16 Octobre 2006, 21h21mn 14s Objet : Re: [TxMt] how to disable spell checking Edit -> Spelling -> Check Spelling -> Never On Oct 16, 2006, at 12:03 PM, Francois wrote: Hello all, I am just installing TextMate on my new iMac and I face la little problem : by default, spell checking is activated. My question : how can I disable spell checking ? Thanks G ___________________________________________________________________________ Découvrez une nouvelle façon d'obtenir des réponses à toutes vos questions ! Demandez à ceux qui savent sur Yahoo! Questions/Réponses http://fr.answers.yahoo.com ______________________________________________________________________ For new threads USE THIS: textmate(a)lists.macromates.com (threading gets destroyed and the universe will collapse if you don't) http://lists.macromates.com/mailman/listinfo/textmate --- michael reece :: software engineer :: mreece(a)vinq.com ______________________________________________________________________ For new threads USE THIS: textmate(a)lists.macromates.com (threading gets destroyed and the universe will collapse if you don't) http://lists.macromates.com/mailman/listinfo/textmate ___________________________________________________________________________ Découvrez une nouvelle façon d'obtenir des réponses à toutes vos questions ! Demandez à ceux qui savent sur Yahoo! Questions/Réponses http://fr.answers.yahoo.com

19 years, 12 months

1
0
0 0

Find in document: list all lines for a pattern and jump to one by clicking?

by Hans-Joerg Bibiko

Hi, many times I have the following task. list all lines for a specific search pattern within my document and navigate to some/all lines in order to do something OK. I do this with 'Filter Through Command' : grep -ni PATTERN ; Input: Document; Output New Document I get a list of lines containing my PATTERN with the line number as prefix. My question is now: Is there an elegant way to click on one line, get the leading line number, and go to that line in my main document? If clicking would be a problem drag'n'drop would also work. I looked for a command like 'go to line' but I didn't find it. Even with a macro I didn't come to grips it. Many thanks in advance Hans PS Maybe it would be worth to implement this search option in TM(?)

19 years, 12 months

2
2
0 0

Makefile bundle syntax enhancement

by Jan Lehnardt

The attached patch adds support for the ?= operator in the Makefile bundle. I'm not sure about the procedure of submitting patches and getting them committed to svn, so I hope somebody can pick it up from here or point me to the proper place. Thanks, Jan --

19 years, 12 months

2
1
0 0

exporting/saving a bundle

by Bill Duenskie

How do you save or export a bundle? I just created a new one and want to make sure I don't lose it. Thanks, Bill

19 years, 12 months

2
1
0 0

NDA bug reports?

by Fritz Anderson

Some instinct tells me that the email address Allan exposes to this list is a throwaway. It's therefore possible he doesn't read mail sent to that address. How might I report bugs that are not for publication, because they involve proprietary or nondisclosed software? Neither this list nor the public bug-tracking DB are appropriate. Maybe in my usual fatheadedness (and I take it as an insult that the Mac spelling checker includes "fatheadedness") I've missed a way to submit a bug to the DB without publishing it? — F

19 years, 12 months

4
3
0 0

Blogging Bundle: Blog command

by Caius Durling

When I create a blog markdown document and then type `blog⇥' it pops up the dialog to allow me to choose my blog. (If I have more than one blog defined.) If I hit cancel in the dialog it pops up a tooltip about how I need to setup my blogs as none are defined. This should probably be corrected. Expected behaviour: Dialog cancels and leaves me with the text `blog' after typing `blog⇥' Actual behaviour: When you hit cancel it pops up a tooltip saying that no blogs are setup and that I need to set them up. Fix: catch a cancel and return nothing? Caius ____________________________________ Caius Durling UK Student tel: +44 (0) 7746 746039 email: inemo(a)mac.com nemo8686(a)mac.com web: http://caius.name/ http://qwert.us/ ____________________________________

19 years, 12 months

1
0
0 0

Latex: Drag'n'drop from pdf to TextMate

by Niels Kobschätzki

Hi! I tried to Drag'n'Drop an image from the Finder (or the Project Drawer) to the Textmate. On my iBook its working w/out any problem, on my new iMac I get the folllowing error (and nothing else): /usr/lib/ruby/1.8/pathname.rb:529:in I tried to shorten the filename, I tried to remove the space from the folder-name where the project is in and nothing helped (and I don't know ruby that well for having an idea what's up with the file from above) Both TextMates are at Version 1.5.3(1269) and I checked out the actual svn-version. Any help appreciated :) Niels

19 years, 12 months

2
2
0 0

run script with args

by matt＠tidbits.com

Sorry for the newbie question, but how do I run the script I'm looking at, with arguments? For example I'm editing a Ruby script and I want to run it, supplying a filename that the script is to pick up as ARGV[0] and read. I can't believe that the answer is "use the Terminal"; surely I can stay in TextMate and do this, in some way that I'm just failing to see. Thx - m. -- matt neuburg, phd = matt(a)tidbits.com, http://www.tidbits.com/matt/ pantes anthropoi tou eidenai oregontai phusei AppleScript: the Definitive Guide - Second Edition!

20 years

5
6
0 0

open all files in group/folder?

by Xavier Noria

Is there a way to open all the files in a given group/folder, or all selected files perhaps? -- fxn PS: The motivation is I am using TM to give a talk (inspired by DHH's keynote at RailsConf Europe). All the files/slides live in a group and to start the presentation it would be handy to have them opened in one shot, and in their relative order. PS2: I just discovered you can use a remote to do a presentation with TM since Mira and friends let you map buttons in Apple Remote to ⌥⌘←/→. There's order in the Universe.

20 years

2
1
0 0

drag commands

by marios

I have the following drag command for zip files to be inserted as snippet: echo -n "<a href=\"http://$TM_REMOTE_URL/file_download/\${1:file_id}\" title=\"\${2:"$TM_DROPPED_FILE"}\">\${3:"$TM_DROPPED_FILE"}</a>" This will insert a download snippet for a default URL on a live server. However, I would like to strip the path somehow from the variable. Does anyone know how to do this,through a substitution reg ex maybe ? Additionally a variable named $TM_FILE_NAME (That would just insert the name of the file instead of $TM_DROPPED_FILE would make much sense here for such a drag command, where you don't care so much about the path. regards, marios

20 years

3
18
0 0

Problem with insert open/close

by marios

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi, again Can any Ruby Guru tell me, what is wrong with this code. http://pastie.caboo.se/17615 It gives me a syntax error. The Ruby version is 1.8.2 It has been working before, and ceased to do so , after removing one tag item from the txp_single array. It is a slight modification of the html version. regards, marios -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.1 (Darwin) Comment: This might change in the future Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org iD8DBQFFMIYv8tSzPOYuZvQRAgdYAJ47wnqk9T8O++jYPDuqp0Ls7PyWJACgu8AE Ks+KAlpVY4bwEYdC58NAgfY= =6SzG -----END PGP SIGNATURE-----

20 years

2
2
0 0

Feature Request: Search within Directory/Group

by Dave Grijalva

Search within project is great, but as projects grow, it becomes slower to perform a search within the project. I would be fantastic to be able to search within a selected Folder or Group. Is this in there somewhere an I'm missing it? -dave

20 years

2
1
0 0

Project Bundle

by Dave Grijalva

Is it possible to create a bundle that exists only within a project? I often have instances of commands, snippets, or scripts that I only need/want within the context of a certain project. It would be fantastic if I could have a bundle that only existed for a certain project. -dave

20 years

2
1
0 0

Smooth Scrolling

by Tommaso Passi

Hello, seems that Smoot Scrolling doesn't work in TM like in any other cocoa app (e.g. colloquy). Someone experienced this? (I have asked for this in irc today, without answer)

20 years

4
6
0 0

How to type Chinese or Japanese with TextMate?

by Hans-Joerg Bibiko

How to type Chinese or Japanese with TextMate? Sometimes I have to write scripts, html pages, etc. with Chinese, Japanese, Korean, etc. strings. The problem is that within TextMate I cannot use e.g. Kotoeri (the Japanese Input Editor) because I don't see what I'm typing. In order to avoid to change to an other program I wrote a very easy code snippet with CocoaDialog's textbox feature. Here is one way to use my suggestion: - open the Bundle Editor - Show all - go to the folder 'TextMate' (or whatever) - add a new command 'inputCJK' (or whatever) Command data - Save: nothing - Command(s): # open CocoaDialog's textbox res=$(CocoaDialog textbox \ --title "Input CJK" \ --informative-text "Write up here..." \ --selected \ --scroll-top top \ --editable \ --no-newline \ --button1 "Insert" \ --button2 "Cancel") # If user canceled exit. [[ $( (tail -r <<<"$res") | tail -n1) == "2" ]] && \ exit_discard # delete first line res=$(sed '1,1d' <<<"$res") # print the content of the textbox echo -n "$res" Input: None Output: Insert as Snippet Activation: Key Equivalent shift+option+i (or whatever) Scope: leave it empty With the help of this script you are able to use Kotoeri or other IME within TM indirectly. I know that isn't the most elegant way but for writing small scripts using some Japanese, Chinese strings is quite good. Of course, TM has some problems to display Chinese characaters but, as I mentioned before, for smaller things it is sufficient. ;) Hopefully the very tiny script is useful for others as well. Feedback is highly welcomed. Many greetings, Hans-Jörg Bibiko ---------------------------------------------------------------- This message was sent using IMP, the Internet Messaging Program.

20 years

2
1
0 0

How to open an encoded file with TextMate?

by Hans-Joerg Bibiko

Many users mentioned that there is sometimes the need to open a file which is encoded in e.g. Chinese Big5 or in Japanese Shift-JIS. The TextMate manual recommends in respect to that topic to use the UNIX command 'iconv'. It works perfectly, but if you have to open many files of different encodings the typing of such commands will become a bit uncomfortable. To make it a bit easier I wrote with the Bundle Editor a new template called openEncodedFile based on CocoaDialog's features. Here is one way to use my suggestion: - open the Bundle Editor - Show all - go to the folder 'TextMate' (or whatever) - add a new template 'openEncodedFile' (or whatever) Template data - Extension: leave it empty - Command(s): # open CocoaDialog's file select menu file=$(CocoaDialog fileselect \ --title "Open an encoded file" \ --with-directory $HOME/ \ ) # check for valid file if [ -n "$file" ]; then # open CocoaDialog's dropdown menu # for more encodings add them to '--items' # to list all possibile encodings use the Terminal with 'iconv -l' res=$(CocoaDialog dropdown \ --title "Open an encoded file" \ --text "Choose the encoding:" \ ??exit?onchange \ --button1 "Open" \ --button2 "Cancel" \ --items "BIG5" "EUC-TW" "GB2312" "SJIS" "EUC-JP" "KOI8-R" \ ) # if user canceled exit [[ $( (tail -r <<<"$res") | tail -n1) == "2" ]] && \ exit_discard res=$(tail -n1 <<<"$res") # add more 'elif' according to '--items' if needed if [ "$res" == 0 ]; then ENC="BIG5" elif [ "$res" == 1 ]; then ENC="EUC-TW" elif [ "$res" == 2 ]; then ENC="GB2312" elif [ "$res" == 3 ]; then ENC="SJIS" elif [ "$res" == 4 ]; then ENC="EUC-JP" elif [ "$res" == 5 ]; then ENC="KOI8-R" fi # start conversion to UTF-8 and send the result as a new file back to TM iconv -f "$ENC" -t utf-8 "$file" > "$TM_NEW_FILE" fi - Output: Insert as Text - Activation: Key Equivalent shift+option+o (my suggestion) - Scope: leave it empty I've chosen a new template because the used keyboard short-cut is also available if no document is open. As you can see in the script you can add/edit encodings very easily. (More details within the code) If you start that bundle (shift+option+o) you will see a file choose menu. Select your file and press ENTER or 'Open'. Then you will be asked to input the right encoding. The available encodings are listed in a drop-down menu. Select one encoding and press ENTER or 'Open'. The script will convert your file according to the selected encoding to utf-8. The result will be shown in a new document. Hopefully the very tiny script is useful for others as well. Feedback is highly welcomed. Many greetings, Hans-Jörg Bibiko PS TODO: Include an automatical encoding detection. Hopefully coming soon ;) ---------------------------------------------------------------- This message was sent using IMP, the Internet Messaging Program.

20 years

1
0
0 0

Emacs and TextMate

by Kai von Fintel

Interesting blog post: http://blog.nicksieger.com/articles/2006/10/13/emacs-to-textmate-part-1 Some of the features sound like snippets could do them. I'd be interested to see what experienced TextMate hackers have to say. -- Kai von Fintel http://semantics-online.org

20 years

2
1
0 0

Strange inconsistent behavior

by Michael Gregoire

Well, I've been having quite a time of it with tab-triggered commands. From looking through the many existing bundles, I'm not surprised it took me this long to notice this bug(?), there are very very few commands that use tab triggers. The problem is that a tab-triggered command will empty the line that I use the tab-trigger within when in fact the command is supposed to replace or alter the line in some way, not delete it. I first noticed the behavior when using Mike Mellor's GTD2 bundle and at first thought that it was his scripts that weren't working on my system. After some back and forth communication between Mike and I, I was able to see that this problem happens with MOST commands that are tab-triggered.... MOST but not ALL. I could understand all of them not working, but most of the few that exist in the bundles I have active don't work while one does. Here's a list of the commands and their bundles: GTD2: delegate (python script) wait (python script) undo state change (python script) done (python script) Objective-C: alloc (ruby script) super (doesn't seem to, but haven't the time to layout test code) (python script) The one example that does work is... Ruby: word_wrap() (ruby script) The only common thread I can see is the path to the executable at the top of the shell script. The ones that fail all are shell scripts in which they define the path to the exec file at the top: #!/usr/bin/env python #!/usr/bin/env ruby But then, there are other scripts that AREN'T tab-triggered and also use shell scripts with the defined path that work. I'm using TextMate Version 1.5.3 (1269) on OSX 10.4.8 on a 1GHz PowerPC G4 powerbook. Any help narrowing this problem down would be greatly appreciated. Thanks Mike

20 years

2
8
0 0

Web preview disappears?

by Brett Terpstra

I know it's probably something obvious I'm not doing, but I'd really like to be able to preview an HTML document in a project while editing a linked CSS file. Every time I open a preview on the HTML document and switch to the CSS file in my project, the web preview closes. Is this normal? I've been doing fine with using the "Refresh open browsers" command and split off commands to shift-refresh firefox and exclusively refresh Xylescope, but having the instant feedback in the web preview would be great, especially when combined with the current ability to pipe through your PHP installation. Thanks, Brett

20 years

2
2
0 0

GTD 2 URLS?

by Bill Bumgarner

OK -- I'm diving into the GTD2 bundle's way of doing GTD. Cool enough. The URLs for the GTD Active View List seem broken. At least, clicking 'em does not bring up the file/line as I would expect. The URLs produced are of the form: txmt://open/?url=file://personal&line=7 Clearly, the file path is incorrect. b.bum

20 years

2
3
0 0

Mail quotation levels scope

by Fred B

When editing a mail, double quoted blocks have this scope: text.mail.markdown text.html.markdown meta.block-level.markdown markup.quote.markdown markup.quote.markdown Shouldn't it be "markup.quote.double.markdown" or something? Or is it possible to apply different colors to different quotation levels like that? Thanks -- FredB

20 years

2
2
0 0

Re: [TxMt] Slow Find in Project

by Andrew Jaffe

Hi all, [apologies if this appears more than once; been having posting trouble] guerom00 wrote: > Hi there, > > This a feature request : I would like to be able > to cancel a “Find in Project”. > Because while TM searches, it basically freezes > for any other actions... > > TIA :) More generally, this brings up the question of why the system (not just TM!) becomes unresponsive, and why the search is so slow (at least for projects that include whole directory trees). Yours, Andrew

20 years

3
3
0 0

Project file persistently reincludes folders

by Fritz Anderson

Version 1.5.3 (1215). I have an Xcode project directory, which a TextMate project file encompasses. The directory contains a "build" subdirectory. It would be very undesirable to include that directory (and a couple of others, such as .xclassmodels, also some binaries like a Stuffit archive) in the TextMate project, as project-wide searches take much, much longer when (I assume) the search interrogates all the files in the build tree. So I select the build folder in the project list and press backspace. TextMate asks if I want a remove-from-project or a delete-file. Remove, please. Shortly thereafter (it may be related to deactivating and reselecting TextMate), the build folder appears in the list again. Grz. I have double-checked that I am dealing with a TextMate project file, and not a directory window. Some of the re-added files and folders have been modified while TextMate is running; most have not. I had used a directory window before switching to a project. I originally populated the project by dragging the Xcode project directory into the file list. What am I missing? Or what is TextMate missing? It may be my problem, as searching for "project file reincludes folders" turns up nothing in a list-archive search. — F

20 years

2
1
0 0

list (ul/ol) HTML snippet question

by Adam Stacoviak

Thanks Allan. The code works perfectly! I've tried to insert a variable inside... <${1:ul}> ${TM_SELECTED_TEXT/(.+)(?:\n(.+))?/ <li class="${3:odd}">$1<\/li>(?2: \n <li>$2<\/li>)/g} </$1> ...and this is the result... <ul> <li class="${3:odd}">dfadfadfadfadfad</li> <li>fadfadfadfdaf</li> <li class="${3:odd}">afdfadfdafd</li> </ul> How can we adjust the class to be the next tab stop with a default? I also adjusted your code to allow for a clean indentation of the li elsments. Thanks for the help. :)

20 years

2
1
0 0

extra break after every line for html files

by Bill Duenskie

Whenever I open any of my html files it adds an extra line break after each line. Is there an easy way stop this?

20 years

2
1
0 0

Clean Macros

by Marshall Beddoe

Hello, Forgive me if this question has been asked, I searched but found no answer. I am working on a bundle that is a subset of the ruby bundle and I would like to have some macros similar to the ones in the ruby bundle, namely the macros that automatically insert the requires. Looking at the macros in the ruby bundle, they are very clean: - moveToBeginningOfDocumentAndModifySelection: - executeCommandWithOptions: { command = "insert_requires.rb yaml"; input = selection; output = insertAsSnippet; } - insertSnippetWithOptions etc. Since, there is no real bundle editor, I am trying to replicate this process for macros under my bundle. If I were to get to the step of executing the command, I hit the key equivalent for this insert_requires.rb command, but instead of getting a clean looking macro recording like the one above, I get one who's command is filled with the exact ruby source code being executed: { beforeRunningCommand = nop; command = "#!/usr/bin/env ruby\n$: << \"#{ENV ['TM_SUPPORT_PATH']}/lib\"\n\nrequire \"escape\"\nrequire \"open3\"\n \nCURSOR = [0xFFFC].pack(\"U\").freeze\nline, col = ENV [\"TM_LINE_NUMBER\"].to_i - 1, ENV[\"TM_LINE_INDEX\"].to_i\n\nstdin, stdout, stderr = Open3.popen3(\"/usr/bin/env\", \"ruby\", \"#{ENV ['TM_BUNDLE_SUPPORT']}/bin/insert_requires.rb\")\nThread.new do\n code = STDIN.read.to_a\n code[line][col...col] = CURSOR unless ENV.has_key?('TM_SELECTED_TEXT')\n stdin.write code.join\n stdin.close\nend\n\nprint stdout.read.split(CURSOR).join('${0}')\n"; fallbackInput = document; input = selection; keyEquivalent = "^#"; name = "Insert Missing Requires"; output = insertAsSnippet; scope = "source.ruby"; uuid = "9FB64639-F776-499B-BA6F-BB45F86F80FD"; } Can someone please let me know what I am doing wrong here? Do I have to hand hack the plist file or what? Thanks in Advance, Marshall

20 years

2
1
0 0

Where's my Meta-Slash?

by Guyren Howe

Did a reasonable amount of searching, but can't find it (this product doesn't have the world's greatest documentation). So: how do I get the equivalent of emacs-style meta-slash autocompletion? Guyren G Howe Relevant Logic LLC guyren-at-relevantlogic.com ~ http://relevantlogic.com REALbasic, PHP, Python programming PostgreSQL, MySQL database design and consulting Technical writing and training

20 years

3
2
0 0

Command woes [solved?]

by Brett Terpstra

I was distressed by the fact that my Ruby appeared broken when the Open Projects commands were distributed and they wouldn't work for me. I tried a plethora of solutions, including removing my svn installations and reverting Ruby installations. Ultimately, the solution ended up being copying the text out of the bundle editor, pasting it into a text window, and copying it back into the command window. Then it worked. No changes to the code... weird, right? Is there an explanation for this? Did all of my other fiddling around do something? I toggle off and back on a command every time I make an edit, so it's not a question of whether I was activating any changes or not. I just thought I'd throw it out there and see if it had an explanation, or perhaps solved anyone else's problems (none of which I've heard about ;-)). Thanks, Brett

20 years

3
2
0 0

bug? command tab and cursor position

by Dave Grijalva

I'm experiencing an issue where, if my cursor is in the middle of a line, and i use cmd+] to indent the line, my cursor position is shifted one character to the left. not a huge deal, but a bit annoying. anybody else experience this? -dave

20 years

3
2
0 0

Columnar selection shortcut inconvenience

by porneL

TM is very sensitive about order in which Alt and mouse button are released. I often end up with regular selection when I try to select columns. I've checked XCode and Word - both requre Alt to be pressed only when clicking mouse button, not when relasing. I find that much easier to work with - it's fail-safe and I don't have to hold Alt when selecting. Is there a reason why TM has selection implemented like this? Can this be changed or made configurable? -- regards, porneL

20 years

2
3
0 0

Using a command and waiting for stdout

by logista

Hello everybody, First, the caveats and the waffling: I'm new to TextMate, I'm not a programmer, I hope I'm not missing something obvious, I've never posted to a mailing list before. There, now that's out of the way, here's my problem: I process a lot of texts for Project Gutenberg. PG has a homemade C program (GutCheck -- http://gutcheck.sourceforge.net) which checks for various features in the text to make sure it's in good shape for posting to PG. I normally run it from Terminal and thought I could easily make a Command to do it from TextMate. I made my command, and as long as I don't add any arguments, I get back the "usage" information for GutCheck. So far, so good. However, when I put in my file name (e.g. gutcheck "$TM_FILEPATH"), I don't get anything other than a new empty untitled document and short-lived beach-ball. If I make the command pipe into another (specific) document (e.g. gutcheck "$TM_FILEPATH" > mynewfile.out), I get one line of response from gutcheck, and then the rest of the information is stored in the other document. I then have to open it separately; so it's not much different from running the command in Terminal which is what I'm trying to avoid. I thought it had something to do with GutCheck reporting to stderr instead of stdout, but there's a switch available to turn that off. It didn't make any difference. The _weird_ thing though, is that when I have in my command "Output: Show as HTML" (instead of Create New Document), everything is there in the HTML window (but unreadable because there are no line breaks). What am I missing or doing incorrectly? Ah, another clue, perhaps: when I run the command on a short file (like this message), it works as I expect (Command: gutcheck "$TM_FILEPATH" Output: Create New Document). But few ebooks are 17 lines long. How do I make it work for real texts (600 to 6000 or more lines)? Thanks in advance for any advice, Barbara

20 years

4
5
0 0

list (ul/ol) HTML snippet question

by Adam Stacoviak

How could we alter this. <${1:ul}> ${TM_SELECTED_TEXT/.+/ <li>$0<\/li>/g} </$1> ...to add a class option to the li tag, but only every other instance of the li tag? Thanks Sune for setting up this snippet, it saves me a ton of time when creating ul/ol lists!!!! Adam Stacoviak Image202 Entertainment www.image202.com -- houston. 713.4291456 toronto. 416.9075496 fax. 713.4562013

20 years

2
1
0 0

Command-R ctr-shft-A suddenly very slow

by Jamie Orchard-Hays

I use TextMate all day for Ruby on Rails apps. Today, my command-R and command-shift-R commands have suddenly started taking a very long time to execute and return. Using them for unit tests and the tests indicate they've run in under a second. It's taking minutes for the window to finish. When I run this on the comman line the tests run instantly. I've noticed the same problem with Ctrl-Shft-A as well. (I updgraded to ruby 1.8.5 via MacPorts today.) Thanks, Jamie

20 years

2
3
0 0

Pristine Copy Double click behavior

by marios

Hi again, I am trying to figure out, how I can update a Language Grammar of a Pristine Copy, by double clicking a Previous pristine Copy, that is derived from the same UUID, by Dragging it out from the Bundle Editor. I tried both double clicking The Language Grammar in the Syntaxes Folder, or the Bundle altogether from a Finder Window. What is the expected Behavior in those cases? The CoCoa Dialog tells me to confirm the Update of the previous Bundle, with the message that customizations will be retained, however, a Grammar for instance reflows, but the changes do not seem to be applied. I can't remember, if that was the case for previous TM revisions, but I was just wondering what was the Expected behavior in those cases. (cutting Edge r1269) regards, marios

20 years

2
4
0 0

Attribute links to file command

by marios

Hi to all, Suppose, I have a document with HTML like tags, where each unique tag attribute of a specific tag corresponds to a file not in the same Folder, but a sibling folder of the documents window parents folder. I'm trying to make a command, that when triggered via key equivalent will open that correspondent file, if the caret is on that scope. I've managed just to filter the filename. eg.: if I do: find "$TM_DIRECTORY/.." -name "$TM_CURRENT_WORD*article.txfml" -exec basename "{}" \;|sort then this will give me the desired filename which is mrs_promo.article.txfml. My question is, how can I make this command, so that it will open this file inside my project, even if it is not open as a project tab. Or, alternatively to open an Html window, with a link, when clicked on, will take me to the file. I've looked around a bit, if I can find an example in other Bundles, but only saw Ruby examples. (Sorry, for bothering again, I promise, this will be the last question for the next 2 weeks) regards, marios

20 years

2
2
0 0

New Version of the GTD Bundle

by Mike Mellor

I have added a new version of the GTD bundle to the repository, called (for now) GTD2. It is based on a syntax described at <http:// patrickrhone.com/journal/archives/2006/05/175.html>. Also, I have done a quick write-up of the new system at <http://panalaska.org/geek/ >. It uses a new contexts.gtd file, which I have added to the Support folder in the bundle. Based on user feedback, I will merge the GTD and GTD2 bundles in a week or so. Please let me know if there is any interest in this bundle. Thanks! Mike

20 years

2
8
0 0

'Documentation for word' command in ruby broken?

by Dave Baldwin

When I try and use the 'Documentation for word' command (control h) I now get the error message: .../lib/web_preview.rb:6 in 'html_header' : undefined method url_encode for ERB::Util:Module (No Method Error) from tmp/ temp_textmate_Qp8b1:19 This has worked in the past and the only thing that I believe has changed since it was working is the version of Textmate (now at 1.5.3 (1258)). Nothing in the svn bundle logs on the RSS feed looked like it related to this. I have removed all my customization by getting rid of the Bundles folder in ~/Library/Application Support/TextMate with no effect and there is no TextMate folder in /Library/ Application Support. Dave.

20 years

2
6
0 0

Re: [TxMt] coldfusion bundle

by Bill Duenskie

That'd be great Daniel, I'd use the heck out of it. I know a bunch of other people who'd probably use it as well. Bill ----- Original Message ---- From: Daniel Stockman <daniel(a)evocateur.org> To: TextMate users <textmate(a)lists.macromates.com> Sent: Tuesday, October 10, 2006 4:48:43 PM Subject: Re: [TxMt] coldfusion bundle Bill Duenskie wrote: > Is there an Adobe ColdFusion for Textmate? I can't seem to find one. Indeed, I use Textmate for CF all the time. I basically hacked up a copy of the HTML Bundle, adding in a new grammar with various bits and bobs lifted from the Javascript bundle (for the CFscript parts). I'll look at cleaning it up and packaging it for distribution, it's a bit rickety at the moment. ~ Daniel ______________________________________________________________________ For new threads USE THIS: textmate(a)lists.macromates.com (threading gets destroyed and the universe will collapse if you don't) http://lists.macromates.com/mailman/listinfo/textmate

20 years

1
0
0 0

coldfusion bundle

by Bill Duenskie

Is there an Adobe ColdFusion for Textmate? I can't seem to find one.

20 years

3
2
0 0

Re: [TxMt] remote editing with textmate

by Bill Duenskie

Charley, Thanks for the info. Unfortunately I'm on a shared hosting environment and my host doesn't support WebDav. It's FTP or nothing for me. Bill ----- Original Message ---- From: Charley Tiggs <lists(a)tiggs.net> To: TextMate users <textmate(a)lists.macromates.com> Sent: Tuesday, October 10, 2006 3:16:05 PM Subject: Re: [TxMt] remote editing with textmate Actually, why don't you look in to WebDAV? Is WebDAV not available to you? If so, you can mount the WebDAV point and it'll behave like a drive. Depending on configured permissions, you'll have the ability to read and write. Charley Bill Duenskie wrote: > I would definately need write and create ability, that stinks. > > Is there a program that can be purchased that would allow me to mount an FTP with read, write and create? > > Thanks! > > ----- Original Message ---- > From: Helge Hartmann <helge.hartmann(a)gmx.de> > To: TextMate users <textmate(a)lists.macromates.com> > Sent: Tuesday, October 10, 2006 4:03:13 AM > Subject: Re: [TxMt] remote editing with textmate > > The problem is, that the finder only mounts ftp server read-only. > > Helge > > Am 10.10.2006 um 06:11 schrieb Dave Grijalva: > > the mac can do this natively. in finder, choose Go > Connect to Server... (cmd+K). You can mount NFS, SMB, and FTP. Sadly, there is no SFTP or FTPS support. > > -dave > > On 10/9/06, Bill Duenskie <bduenskie(a)yahoo.com> wrote: I know Textmate doesn't have remote editing built in, but is there a program that is similar to www.webdrive.com on a mac? Basically webdrive allowed you to connect to a FTP server and map the connection to a drive. Can anyone recommend a similar program on a mac? > > > > > > > ______________________________________________________________________ > For new threads USE THIS: textmate(a)lists.macromates.com > (threading gets destroyed and the universe will collapse if you don't) > http://lists.macromates.com/mailman/listinfo/textmate > > > > > > ______________________________________________________________________ > For new threads USE THIS: textmate(a)lists.macromates.com > (threading gets destroyed and the universe will collapse if you don't) > http://lists.macromates.com/mailman/listinfo/textmate > > > > > ______________________________________________________________________ > For new threads USE THIS: textmate(a)lists.macromates.com > (threading gets destroyed and the universe will collapse if you don't) > http://lists.macromates.com/mailman/listinfo/textmate > > > > > > > > > ------------------------------------------------------------------------ > > > ______________________________________________________________________ > For new threads USE THIS: textmate(a)lists.macromates.com > (threading gets destroyed and the universe will collapse if you don't) > http://lists.macromates.com/mailman/listinfo/textmate ______________________________________________________________________ For new threads USE THIS: textmate(a)lists.macromates.com (threading gets destroyed and the universe will collapse if you don't) http://lists.macromates.com/mailman/listinfo/textmate

20 years

1
0
0 0

wish: Open Recent... list should keep projects longer

by porneL

I'd like Open Recent... list to keep something like minimum 3 last tmproj files, no matter how many other files were open. The point is that if I open lots of non-project files my projects get kicked out of the list, but it's more likely that I'll need to re-open my projects than any other files. -- regards, porneL

20 years

1
0
0 0

Re: Problem with blogging bundle (Jens Wetzl)

by Laudun John

Jen, TextMate does not do the conversion of MarkDown "marked up" text: WordPress does that. You will need to install the MarkDown plug-in, which can be found on the WordPress site. I'm not sure if Smarty Pants is rolled into it or not, but if you like the look of print typography, then you might consider that plug-in as well. (SmartyPants does things like "smart quotes" and em dashes.) john On Oct 10, 2006, at 10:01 AM, textmate-request(a)lists.macromates.com wrote: >> However, the markdown problem persists! Is there something I need >> to install on the server so markdown is translated? I thought >> TextMate was supposed to translate it to HTML before sending it to >> the blog...

20 years

1
0
0 0

[OT] R/W-FTP-Mount in Finder (was Re: [TxMt] remote editing with textmate)

by Niels Kobschaetzki

On Oct 10, 2006, at 4:36 PM, Bill Duenskie wrote: > I would definately need write and create ability, that stinks. > > Is there a program that can be purchased that would allow me to > mount an FTP with read, write and create? Maybe this one - but I didn't tried it yet: http://jm.marino.free.fr/Software/Mac/AutomountMaker/introduction.html Niels -- Linux is only free if your time has no value -- Jamie Zawinski

20 years

1
0
0 0

Problem with blogging bundle

by Jens Wetzl

Hello there, I tried using the Blogging bundle (according to the instructions of the screencast) with my WordPress Blog (version 2.0.4). Preview works, but when trying to send a post to the blog I eventually get a tooltip with some ruby code and the message "time out". Now the weird thing is that the blog actually shows the new blog post, but markdown isn't converted to html. Posting directly in html works, but also with the time out error and textmate doesn't update the document with post id, category, ... and the rest of the headers that should normally appear according to the screencast. Any idea what I did wrong? Thanks in advance Jens

20 years

2
2
0 0

2026

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

TextMate