TextMate

textmate@lists.macromates.com

10171 discussions

by Alistair Colling

Hi there, I remember seeing Growl notifications for when SWFs had compiled from Textmate. I'm compiling using Simon Gregory's AS3 bundle fcsh compiler. Does anybody know if this is possible to do? Thanks, Ali -------------------------------------------------------------------------- Alistair Colling Interactive Developer FPP Brand Communications (Newcastle upon Tyne) The Courtyard Dinsdale Place Sandyford Newcastle upon Tyne NE2 1BD Telephone: +44 (0)191 261 6662 Fax: +44 (0)191 233 2511 This transmission is confidential and intended solely for the person or organisation to whom it is addressed. It may contain privileged and confidential information. If you are not the intended recipient, you should not copy, distribute or take any action in reliance on it. If you have received this transmission in error, please notify the sender at the e-mail address above. FPP Design Limited. Reg. Office: The Courtyard, Dinsdale Place, Sandyford, Newcastle upon Tyne NE2 1BD. Registered Number 3775564. Registered in England and Wales. Visit our website at http://www.fpp.net/

17 years, 1 month

PHP Debugging - ZDebug Client Coming Tomorrow

by Clark Endrizzi

Hi all, About a month or so ago I asked what people did about php debugging and stuff, something I really wanted that ZDE offered (the client itself I don't like). Several people responded and it sounded like there were a lot of error_log'ing and stuff, but nothing on par with a real debugger. With this in mind, I figured it was worth mentioning this project: http://www.bluestatic.org/software/macgdbp/ It's a Cocoa based client for xdebug that code stepping and more. More info can be found here: http://www.tuaw.com/2008/06/16/macgdbp-kills-php-bugs-dead/ Hope this is helpful (and appropriate). Clark Endrizzi

17 years, 1 month

How to add Actionscript breakpoints?

by Alistair Colling

Hi there, I'm trying to figure out how to add breakpoints to my AS3 code. I'm compiling using Simon Gregory's Flex/AS3 bundle using the FCSH compiler. Also I'd like to know what's a good debugger to use that I can pause and execute my code with. I'm on a Mac so I can't use FlashDevelop and I'd rather not buy a license for the Flex IDE. Thanks guys, Alistair -------------------------------------------------------------------------- Alistair Colling Interactive Developer FPP Brand Communications (Newcastle upon Tyne) The Courtyard Dinsdale Place Sandyford Newcastle upon Tyne NE2 1BD Telephone: +44 (0)191 261 6662 Fax: +44 (0)191 233 2511 This transmission is confidential and intended solely for the person or organisation to whom it is addressed. It may contain privileged and confidential information. If you are not the intended recipient, you should not copy, distribute or take any action in reliance on it. If you have received this transmission in error, please notify the sender at the e-mail address above. FPP Design Limited. Reg. Office: The Courtyard, Dinsdale Place, Sandyford, Newcastle upon Tyne NE2 1BD. Registered Number 3775564. Registered in England and Wales. Visit our website at http://www.fpp.net/

17 years, 1 month

AS3- Textmate open my SWF when compile is finished?

by Alistair Colling

Hiya, I posted this before as part of another query though I don't know if it got missed. I'm compiling using fcsh compile from Simon Gregory's AS3 bundle which is great but I'm not sure how to open the SWF in Flashplayer without choosing the Build command. I'm guessing this is pretty simple to do, any help much appreciated. Thanks Ali -------------------------------------------------------------------------- Alistair Colling Interactive Developer FPP Brand Communications (Newcastle upon Tyne) The Courtyard Dinsdale Place Sandyford Newcastle upon Tyne NE2 1BD Telephone: +44 (0)191 261 6662 Fax: +44 (0)191 233 2511 This transmission is confidential and intended solely for the person or organisation to whom it is addressed. It may contain privileged and confidential information. If you are not the intended recipient, you should not copy, distribute or take any action in reliance on it. If you have received this transmission in error, please notify the sender at the e-mail address above. FPP Design Limited. Reg. Office: The Courtyard, Dinsdale Place, Sandyford, Newcastle upon Tyne NE2 1BD. Registered Number 3775564. Registered in England and Wales. Visit our website at http://www.fpp.net/

17 years, 1 month

How to target my AS3 class library when compiling from Textmate?

by Alistair Colling

Hello, I would like to be able to target my class library so I can re- use AS3 classes I have written. In the Flash IDE I set this in the Preferences though I am not sure where I set this when compiling using fcsh through the AS3 bundle. I am guessing it's in the flex- config.xml file or maybe the project specific project-config.xml file? Also, do I need to manually copy over classes I have used from my library into my project folder in order to share the project with other developers or is there an automated way of exporting the source files in this way? Thanks guys, Alistair -------------------------------------------------------------------------- Alistair Colling Interactive Developer FPP Brand Communications (Newcastle upon Tyne) The Courtyard Dinsdale Place Sandyford Newcastle upon Tyne NE2 1BD Telephone: +44 (0)191 261 6662 Fax: +44 (0)191 233 2511 This transmission is confidential and intended solely for the person or organisation to whom it is addressed. It may contain privileged and confidential information. If you are not the intended recipient, you should not copy, distribute or take any action in reliance on it. If you have received this transmission in error, please notify the sender at the e-mail address above. FPP Design Limited. Reg. Office: The Courtyard, Dinsdale Place, Sandyford, Newcastle upon Tyne NE2 1BD. Registered Number 3775564. Registered in England and Wales. Visit our website at http://www.fpp.net/

17 years, 1 month

Find Current Selection?

by Scott Spain

Howdy. I'm new here. So far, I really like what I see in TextMate. In other text editors I've worked in, when you select some text and launch the find/replace dialog, the "find" field automatically gets populated with the selected text. Is it possible to set TextMate behave this way? Thanks.

17 years, 1 month

Create Sub-menu In Bundle Editor?

by Scott Spain

I know this one can be done. I've been digging, but can't seem to figure it out. I'm using the bundle editor to create a bunch of snippets. Because I have to create so many of them, I like them categorized. I'm looking to do something similar to what I see in the CSS > Background bundle. That is, a top-level category of snippets, plus sub-menus that contain other snippets. How does one go about setting this up? Thanks. - Scott

17 years, 1 month

Page Setup

by Richard Dyce

Embarrassingly simple question - how do I change the page set-up in TextMate? I need to print landscape rather than portrait from an HTML preview, and can't seem to see how to do it. Running 10.5.3. TIA R -- Richard Dyce MA (Cantab.) MBCS MIET

17 years, 1 month

highlight current line

by chad gulley

i've been searching around, and i can't seem to figure out how to have textmate highlight the current line of the cursor. i see the "Line Highlight" in the preferences of the theme, but i can't seem to make it work. i know i'm probably missing the obvious, but how can i accomplish this? thanks. --- chad gulley

17 years, 1 month

Setting up syntax highlighting for python scripts embedded in xml files

by Pedja

Hi, The project I am currently working on requires me to write xml configuration files for a custom application for experience sampling. The files contain embedded python scripts, contained in the following regions: <script event="OnLoad"> <![CDATA[ python script ]]> </script> I know that TextMate is able to deal with embedded regions that have a different language deffinition than the main file (like php and javascript sections in HTML) so I was trying to set this up for XML so I can have proper syntax highlighting for python. So far, though, I have not had any luck with this. I tried adding the following in the xml language definition, both right after the section for embedded java and, when that didn't work, right after the section for CDATA comments, but it doesn't seem to work: { name = 'source.python.embedded.xml'; begin = '<script.*?}>\s*?<!\[CDATA\['; end = ']]>\s*?<script/>'; beginCaptures = { 0 = { name = 'punctuation.section.embedded.begin.xml'; }; }; endCaptures = { 0 = { name = 'punctuation.section.embedded.end.xml'; }; }; patterns = ( { include = 'source.python'; } ); }, This was based on the example for embedded java, but obviously I either didn't understand what the java example does, or I didn't specify the begin and end strings correctly. I also suspect that since there is already a definition for CDATA comments, this needs to be in a specific place to override that definition. Any help with getting this to work would be greatly appreciated. The scripts can be quite long, so having proper syntax highlighting would make things much easier. Thanks so much, Pedja -- http://www.fastmail.fm - Faster than the air-speed velocity of an unladen european swallow

17 years, 1 month

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

TextMate