TextMate December 2008

textmate@lists.macromates.com

88 participants
87 discussions

bibtex in textmate problem and tentative solution

by Peeter Sällström Randsalu

Hi! I had the same problem as described in a post from Sebastian on 2007-11-11 (http://thread.gmane.org/gmane.editors.textmate.general/ 23160). Here is my error output: Running bibtex on Exjobb (ny).tex Traceback (most recent call last): File "/Users/peeter/Peeterprogram/ TextMate.app/Contents/SharedSupport/Bundles/Latex.tmbundle/Support/bin/ texMate.py", line 457, in texStatus, isFatal, numErrs, numWarns = run_bibtex(texfile=fileName) File "/Users/peeter/Peeterprogram/ TextMate.app/Contents/SharedSupport/Bundles/Latex.tmbundle/Support/bin/ texMate.py", line 71, in run_bibtex return stat,fatal,err,warn UnboundLocalError: local variable 'stat' referenced before assignment It seems that it had to do with the parentheses in my filename messing up the regexes. My solution was to change lines 71 and 72 in Textmate.app/Contents/ SharedSupport/Bundles/Latex.tmbundle/Support/bin/texMate.py as follows: # auxfiles = [f for f in os.listdir('.') if re.search('.aux $',f) > 0] # auxfiles = [f for f in auxfiles if re.match(r'('+ basename + r'\.aux|bu\d+\.aux)',f)] auxfiles = [f for f in os.listdir('.') if re.search('.aux$',f) > 0 and (f.startswith(basename) or re.match(r'bu\d+\.aux', f))] This works, at least for me. Or have I messed something else up in the process? /Peeter

12 years, 2 months

How do I vary the C indentation?

by Berk Geveci

Hi folks, I work on several open-source projects (VTK, ParaView, CMake...) that follow a somewhat unusual indentation style. Instead of if (foo) { bar(); } bar(); they require if (foo) { bar; } bar() Getting the first curly indent right was trivial but I can't figure out how to reduce the indentation _after_ the closing curly. When the pattern matches decreaseIndentPattern, the current line's indentation is reduced. What I need is for the following line to be unindented. Is there any way to do this? Thanks, -berk

13 years, 8 months

LaTeX Watch and Master Files

by Evan Berkowitz

Is there a way to get the ``Watch Document'' option to be master-file aware? It seems to me that watching the master file doesn't work, because it only re-compiles when the master changes, and watching the included files doesn't work because it's not a whole latex file---I get the error Error: No \begin{document} found I couldn't find the command \begin{document} in your file. Help is much appreciated, as always. Evan -------------------------------------------------- Prediction is difficult, especially the future. Niels Bohr

15 years, 1 month

Lua Bundle patch

by Gaspard Bucher

This is a patch to enable text indentation in the Lua bundle. Please include it with the current bundle version. Gaspard

15 years, 3 months

TextMate hangs on large files...

by Jim Leask

I have just discovered TextMate, and am so far very happy with it, but I think I just hit a glitch... I am trying to edit a SQL load file that is about 5M, which shouldn't be a problem. However, some of the lines are very long, as a complete website contents is in a single line. I have no idea how many characters are in this line, but I suspect about 2M worth. Anyway, TextMate hangs while trying to work with this file. I can't do much at all. Even a simple act of scrolling hangs. TextEdit does a reasonably good job with the file though... Actually, I don't think it is hanging, as it eventually responds (about 30 seconds later), but it is so slow that it is completely unusable. Is this a known problem? For me, it is weird files like this that we need an editor like TextMate to be able to easily handle. Thanks... Jim Leask

15 years, 4 months

Quoting Pattern in Latex-Bundle shown as invalid

by Niels Kobschätzki

Hi! I'm just working on some Tex-Document which uses several dialogues which I want to enclose in "< "> (the result are those << >>-enclosures in the document). Would be cool if that could be added to the language grammar. Thanks in advance Niels

15 years, 4 months

How to clear flashlog.txt on compile?

by Alistair Colling

Hey there, I've got my Textmate Flex compiling working great with the AS3 bundle, I'm just wondering if there's a way I can clear flashlog.txt everytime I compile so I don't have to keep doing this manually? Cheers :) Ali -------------------------------------------------------------------------- Alistair Colling Interactive Developer FPP Brand Communications (Newcastle upon Tyne) The Courtyard Dinsdale Place Sandyford Newcastle upon Tyne NE2 1BD Telephone: +44 (0)191 261 6662 Fax: +44 (0)191 233 2511 This transmission is confidential and intended solely for the person or organisation to whom it is addressed. It may contain privileged and confidential information. If you are not the intended recipient, you should not copy, distribute or take any action in reliance on it. If you have received this transmission in error, please notify the sender at the e-mail address above. FPP Design Limited. Reg. Office: The Courtyard, Dinsdale Place, Sandyford, Newcastle upon Tyne NE2 1BD. Registered Number 3775564. Registered in England and Wales. Visit our website at http://www.fpp.net/

15 years, 10 months

Latex bundle troubleshooting II

by Achilleas Lazarides

Hello again, Seems I am still having some trouble with the latex bundle. Basically, the first time I attempt to typeset after launching textmate, I get: ================================================== The current PATH is: /usr/bin /bin /usr/sbin /sbin Please add the directory containing “kpsewhich” to PATH in TextMate's Shell Variables preferences. Alternatively, the PATH can be retrieved from Terminal but this requires a relaunch: (button to perform this operation) ================================================== Now as a matter of fact the correct path is present in my shell variables in textmate's preferences (in "shell variables" under "advanced"), as opposed to just /usr/bin, /bin and sbin as mentioned in the message; furthermore, it is already in my usual PATH. If I do click on the button, it quits and restarts and everything is ok. Checking the preferences, a new PATH var has been added, containing my shell path. This addition occurs even if the exact same path variable is already present in textmate's preferences. If I now quit and restart textmate, the same process is repeated, and a new path variable added to the preferences before I can typeset (identical to the other ones already there), and everything works after that, until I quit again, and so on. This did not happen before I updated my latex and support bundles. Maybe I'm just being thick, but I can't see what is going on, and this is starting to get annoying. Any ideas?

15 years, 11 months

disable new behavior in contextual menu for snippet selection - possible?

by minimal design

The new way of selecting snippets with "command + #" (when for instance there's more than one assigned to a tab trigger) forcing you to use "command" key instead of just number is really annoying... to me. Is it possible to cancel this new behavior somehow? And if not, what's the reason behind the change? I might be better able to get used to it if I can understand the benefits. ;) Thanks!

15 years, 11 months

Sorting in Project Drawer

by Alexander Deruwe

Hey everyone, Recent TextMate convert here and boy do I love it - trial expiring within the week, so will be a paying customer from then on. ;) Have a question, though, with regards to sorting in the Project Drawer. Is it possible to have entries sorted by type, and only then by name? I'd like to keep directories together. (At the top, preferably. ;) I found the following reference (and its references) in the mailing list archives: http://comox.textdrive.com/pipermail/textmate/2004-December/001971.html This message seems to imply the sorting is hard-coded. Alexander Deruwe

15 years, 11 months

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

TextMate December 2008