There's an odd behaviour with project windows disappearing when clicking the Zoom (+) button. When TM2 first opens, it reopens any preexisting windows. Then when I click on the Zoom button the window zoom shrinks and ultimately disappears. I cannot bring it back from hidden status after that.
Anyone else experience this behaviour? It only started happening recently, maybe within the last 2 or 3 builds.
Ed Wong
On 14 Oct 2014, at 16:29, Ed Wong scampy@me.com wrote:
There's an odd behaviour with project windows disappearing when clicking the Zoom (+) button. When TM2 first opens, it reopens any preexisting windows. Then when I click on the Zoom button the window zoom shrinks and ultimately disappears. I cannot bring it back from hidden status after that.
Anyone else experience this behaviour? It only started happening recently, maybe within the last 2 or 3 builds.
Ed Wong
I’ve seen something similar happen today as well. What happened to me was that the tab bar became corrupted (like showing several half tabs over each other, causing gibberish titles). When I closed tab after tab, after closing the last tab the project closed (like it used to do in TM1). After that I totally quit Textmate and restarted it. When I opened the project again (via the Open Recent menu) the window opened in the bottom of another screen at minimum size (around 1 line high and 80 chars width or so).
Might be related to what you saw…
Best regards, Bas
Yes, sounds similar. I found that after the window disappears, if I quit and restart TM2, then the window reappears but shows only the title bar and a few tabs with maybe 5 or 6 pixels height of content. The window shows up on the bottom left of the current screen in a really shrunken state.
Ed
On Oct 14, 2014, at 4:03 PM, Bas Van Klinkenberg txmt@vanklinkenbergsoftware.nl wrote:
On 14 Oct 2014, at 16:29, Ed Wong scampy@me.com wrote:
There's an odd behaviour with project windows disappearing when clicking the Zoom (+) button. When TM2 first opens, it reopens any preexisting windows. Then when I click on the Zoom button the window zoom shrinks and ultimately disappears. I cannot bring it back from hidden status after that.
Anyone else experience this behaviour? It only started happening recently, maybe within the last 2 or 3 builds.
Ed Wong
I’ve seen something similar happen today as well. What happened to me was that the tab bar became corrupted (like showing several half tabs over each other, causing gibberish titles). When I closed tab after tab, after closing the last tab the project closed (like it used to do in TM1). After that I totally quit Textmate and restarted it. When I opened the project again (via the Open Recent menu) the window opened in the bottom of another screen at minimum size (around 1 line high and 80 chars width or so).
Might be related to what you saw…
Best regards, Bas
textmate mailing list textmate@lists.macromates.com http://lists.macromates.com/listinfo/textmate
On 14 Oct 2014, at 22:03, Bas Van Klinkenberg wrote:
I’ve seen something similar happen today as well. What happened to me was that the tab bar became corrupted (like showing several half tabs over each other, causing gibberish titles). When I closed tab after tab, after closing the last tab the project closed (like it used to do in TM1). After that I totally quit Textmate and restarted it. When I opened the project again (via the Open Recent menu) the window opened in the bottom of another screen at minimum size (around 1 line high and 80 chars width or so).
I assume this did not involve clicking the zoom button (like Ed Wong)?
What version of TextMate? What version of the OS?
Can you check console for exceptions (might be too late now though)?
On 15 Oct 2014, at 08:55, Allan Odgaard mailinglist@textmate.org wrote:
On 14 Oct 2014, at 22:03, Bas Van Klinkenberg wrote:
I’ve seen something similar happen today as well. What happened to me was that the tab bar became corrupted (like showing several half tabs over each other, causing gibberish titles). When I closed tab after tab, after closing the last tab the project closed (like it used to do in TM1). After that I totally quit Textmate and restarted it. When I opened the project again (via the Open Recent menu) the window opened in the bottom of another screen at minimum size (around 1 line high and 80 chars width or so).
I assume this did not involve clicking the zoom button (like Ed Wong)?
Well it might have involved it (I’m sorry this is of no help) because I might at one point have moved the Textmate window to another screen and used the zoom button (actually I have a keyboard shortcut for it) to get it to fit on the other screen. This would have been a lot earlier than when I saw the weird tab bar behaviour. I can reproduce the behaviour described by Ed Wong though, clicking the zoom button while the window has screen size will resize it to a tiny thin minimum sized window. Clicking it again will bring back full window size. So at some point it registered a minimum window size as being the ‘previous’ window size.
What version of TextMate? What version of the OS?
TM: 2.0-alpha.9573 OSX: Mavericks 10.9.5
Can you check console for exceptions (might be too late now though)?
Yep too late, although I did a quick scan through a couple of system.logs but didn’t see anything that might be related to this… Anything you want me to grep for?
On a side note: I was debugging a misbehaving WebGL program in Safari at the moment I saw the problems, so I might have been starving the system for resources which maybe caused this issue… Or maybe it’s not related all.
On 14 Oct 2014, at 16:29, Ed Wong wrote:
There's an odd behaviour with project windows disappearing when clicking the Zoom (+) button. When TM2 first opens, it reopens any preexisting windows. Then when I click on the Zoom button the window zoom shrinks and ultimately disappears. I cannot bring it back from hidden status after that.
Anyone else experience this behaviour? It only started happening recently, maybe within the last 2 or 3 builds.
What version of the OS? Perhaps what changed was an update to Yosemite.
Is it 100% reproducible?
Any exceptions in console?
Do you click the zoom button after opening a project (which opens in the non-zoomed size)?
On Oct 15, 2014, at 2:59 AM, Allan Odgaard mailinglist@textmate.org wrote:
On 14 Oct 2014, at 16:29, Ed Wong wrote:
There's an odd behaviour with project windows disappearing when clicking the Zoom (+) button. When TM2 first opens, it reopens any preexisting windows. Then when I click on the Zoom button the window zoom shrinks and ultimately disappears. I cannot bring it back from hidden status after that.
Anyone else experience this behaviour? It only started happening recently, maybe within the last 2 or 3 builds.
What version of the OS? Perhaps what changed was an update to Yosemite.
Mavericks 10.9.5 and latest nightly build of TM2 2.0-alpha.9573
Is it 100% reproducible?
I found a sequence this morning that is 100% reproducible.
1. I have 3 project windows open with multiple files in each (I'm not sure this matters but I'll record it anyways). 2. All project windows are minimized except the first one that you see under the Window list in the menu. 3. Start with the visible window at smaller than screen size and aligned to the left of the screen a) Add some text and Cmd-S b) Drag the right border to widen the window a bit c) Repeat a-b d) Click Zoom button to expand the window to fill the screen e) Add some text and Cmd-S f) Quit TM g) Start TM h) Click on Zoom and shrinkamadoodle (see attachment on how it looks)
Any exceptions in console?
No exceptions. I do get these that's not related to this issue though.
2014-10-14 10:50:23.207 PM TextMate[759]: CGContextScaleCTM: invalid context 0x0. This is a serious error. This application, or a library it uses, is using an invalid context and is thereby contributing to an overall degradation of system stability and reliability. This notice is a courtesy: please fix this problem. It will become a fatal error in an upcoming update. 2014-10-15 10:16:17.049 AM WindowServer[302]: disable_update_timeout: UI updates were forcibly disabled by application "TextMate" for over 1.00 seconds. Server has re-enabled them. 2014-10-15 10:16:23.704 AM WindowServer[302]: common_reenable_update: UI updates were finally reenabled by application "TextMate" after 7.66 seconds (server forcibly re-enabled them after 1.00 seconds) 2014-10-15 10:16:49.004 AM TextMate[400]: Couldn't contact spell checker for Canadian English
Do you click the zoom button after opening a project (which opens in the non-zoomed size)?
The longer sequence listed above provides more detail.
Thanks, Ed
On 16 Oct 2014, at 23:39, Allan Odgaard mailinglist@textmate.org wrote:
On 15 Oct 2014, at 17:22, Ed Wong wrote:
[…] I found a sequence this morning that is 100% reproducible.
Thanks, the issue should be fixed in TextMate 2.0-beta.1 (that’s right, I dropped the alpha label! :) )
Congrats on the beta :-) I guess this bug was the last drop in the alpha bucket :-)
Best regards, Bas
On Oct 16, 2014, at 5:39 PM, Allan Odgaard mailinglist@textmate.org wrote:
On 15 Oct 2014, at 17:22, Ed Wong wrote:
[…] I found a sequence this morning that is 100% reproducible.
Thanks, the issue should be fixed in TextMate 2.0-beta.1 (that’s right, I dropped the alpha label! :) )
Bingo! Tested and works as expected now. Virtual Champagne cork popped for the beta.
Thanks, Ed
I saw odd sizes at times, like shrunk to the point that only the top bar was visible
Elia
📢 twitter/elia☕️ github/elia
On Tue, Oct 14, 2014 at 4:29 PM, Ed Wong scampy@me.com wrote:
There's an odd behaviour with project windows disappearing when clicking the Zoom (+) button. When TM2 first opens, it reopens any preexisting windows. Then when I click on the Zoom button the window zoom shrinks and ultimately disappears. I cannot bring it back from hidden status after that. Anyone else experience this behaviour? It only started happening recently, maybe within the last 2 or 3 builds. Ed Wong _______________________________________________ textmate mailing list textmate@lists.macromates.com http://lists.macromates.com/listinfo/textmate