This is a from a file from Strava generated on an iPhone.
Is there a way to convert it to gpx?
I put in the beginning of the file when heart rate, hr, was 60, then later one once I was moving, and the end of the file. Obviously hr is sprinkled in from time to time. Often very close to every second, but then it drifts. The file just ends as shown here. paus is presumably pause which the program requires before stopping. I imagine if you paused and restarted it would have another strt.
I’m not yet requesting that this be added to GPSBabel, but Strava is popular. But don’t know how many people are digging out this file and want to work with it.
I would like to load it into Ascent, a good, but long unsupported program. Ascent handles gpx, but don’t know what it expects for heart rate.
strt: t:442274070.571564
hr: v:60.000000; t:1420581270.674859;
wp: lat:33.823775; long:-118.368278; hacc:1414.000000; vacc:10.000000; alt:46.013519; speed:-1.000000; course:-1.000000; t:1420581270.911244; dt:1420581270.916915, dist:0.000000
wp: lat:33.824481; long:-118.367274; hacc:1414.000000; vacc:10.000000; alt:46.013519; speed:-1.000000; course:-1.000000; t:1420581270.966093; dt:1420581270.971293, dist:0.000000
wp: lat:33.824835; long:-118.366772; hacc:1414.000000; vacc:10.000000; alt:46.013519; speed:-1.000000; course:-1.000000; t:1420581270.974278; dt:1420581270.980752, dist:0.000000
wp: lat:33.825011; long:-118.366521; hacc:1414.000000; vacc:10.000000; alt:46.013519; speed:-1.000000; course:-1.000000; t:1420581270.980927; dt:1420581270.986745, dist:0.000000
hr: v:60.000000; t:1420581271.674313;
wp: lat:33.812261; long:-118.383594; hacc:50.000000; vacc:96.000000; alt:56.578022; speed:0.000000; course:-1.000000; t:1420581272.162422; dt:1420581272.183868, dist:0.000000
…
hr: v:110.000000; t:1420581503.774007;
wp: lat:33.809755; long:-118.384701; hacc:5.000000; vacc:4.000000; alt:62.196552; speed:1.670000; course:165.937500; t:1420581504.230349; dt:1420581504.245299, dist:363.185229
hr: v:110.000000; t:1420581504.774005;
wp: lat:33.809738; long:-118.384692; hacc:5.000000; vacc:4.000000; alt:62.610554; speed:2.170000; course:161.718750; t:1420581505.294441; dt:1420581505.306045, dist:366.836077
hr: v:110.000000; t:1420581505.773943;
wp: lat:33.809721; long:-118.384684; hacc:5.000000; vacc:4.000000; alt:64.164448; speed:1.970000; course:161.718750; t:1420581506.280267; dt:1420581506.303622, dist:366.836077
hr: v:110.000000; t:1420581506.773943;
wp: lat:33.809707; long:-118.384677; hacc:5.000000; vacc:4.000000; alt:63.869831; speed:1.850000; course:159.960938; t:1420581507.223398; dt:1420581507.237045, dist:370.564706
hr: v:110.000000; t:1420581507.774318;
wp: lat:33.809692; long:-118.384670; hacc:5.000000; vacc:4.000000; alt:63.272663; speed:1.910000; course:159.960938; t:1420581508.217323; dt:1420581508.229643, dist:370.564706
hr: v:110.000000; t:1420581508.774003;
wp: lat:33.809677; long:-118.384664; hacc:5.000000; vacc:4.000000; alt:63.689411; speed:1.770000; course:164.531250; t:1420581509.230239; dt:1420581509.242228, dist:374.098707
…..
wp: lat:33.812128; long:-118.383533; hacc:5.000000; vacc:4.000000; alt:55.949909; speed:0.000000; course:351.210938; t:1420584602.268403; dt:1420584602.334073, dist:11365.188420
wp: lat:33.812123; long:-118.383530; hacc:5.000000; vacc:4.000000; alt:55.499897; speed:0.190000; course:351.210938; t:1420584603.257177; dt:1420584603.260663, dist:11365.188420
wp: lat:33.812121; long:-118.383529; hacc:5.000000; vacc:4.000000; alt:55.349751; speed:0.190000; course:351.210938; t:1420584604.268731; dt:1420584604.274758, dist:11365.188420
wp: lat:33.812121; long:-118.383529; hacc:5.000000; vacc:4.000000; alt:54.506855; speed:0.000000; course:351.210938; t:1420584605.225173; dt:1420584605.229791, dist:11365.188420
wp: lat:33.812121; long:-118.383529; hacc:5.000000; vacc:4.000000; alt:54.519428; speed:0.000000; course:351.210938; t:1420584606.223511; dt:1420584606.228382, dist:11365.188420
wp: lat:33.812121; long:-118.383529; hacc:5.000000; vacc:4.000000; alt:54.269184; speed:0.000000; course:351.210938; t:1420584607.233396; dt:1420584607.237641, dist:11365.188420
wp: lat:33.812121; long:-118.383529; hacc:5.000000; vacc:4.000000; alt:54.149799; speed:0.000000; course:351.210938; t:1420584608.406772; dt:1420584608.410853, dist:11365.188420
paus: type:0 t:442277409.220280
Greg
Dear Allan Odgaard, dear list!
I'm coming here with perhaps a strange request: I'm trying to sidestep one
"feature" of NSTextView and the only application which seems to implement
similar behavior is TextMate so I was hoping you would be so kind to share
the trick.
The thing is, when a window with NSTextView contains lots of text and the
users scrolls to, say, 1/4 of text's height, places the text cursor
somewhere, say, at the top of the window and then resizes the window, the
textview does scroll so that the cursor appears the middle of the textview.
In other words, by default, the window resize triggers NSTextView scroll
which puts the cursor in the middle of the view. Which is what I'm trying
to avoid, i.e. I want the cursor to stay where it was (if possible due to
reflow).
I tried to ask at cocoadev [1] and StackOverflow [2] but got no answer so
far. I tried Dux and Fragaria editors but they seem to auto-scroll as well.
The only editor which I can resize the window of and which keeps the cursor
at the same position is TextMate. I tried to search through its source code
but I could not find the piece of code responsible for it.
Please, could you, or someone else, help me out with this? What did you do
to avoid the default behavior?
Thanks a lot in advance!
Regards,
Ecir Hana
[1] http://lists.apple.com/archives/cocoa-dev/2014/Dec/msg00210.html
[2] http://stackoverflow.com/questions/27651948/nstextview-auto-scroll
I'm running TextMate version 2.0-beta.6 on OSX 10.9.5. Skim is my
preferred viewer but every time I render a latex file I get not only the
normal operation of Skim either opening or refreshing but also TeXShop
opens and displays a blank new file. I'm not sure why this happens, Skim
is the default in my preferences and I tried editing the default viewer in
latex_watch.pl but the behavior continues. One workaround that does stop
this from happening is to just delete the TeXShop commands from
refresh_viewer.scpt. Unfortunately this is only a temporary fix, that
script keeps reverting to it's original version and then the behavior
resumes. Maybe textmate keeps updating the latex bundle after I change
it? I'm not sure.
Does anyone know what the issue is here? Or can anyone suggest a more
permanent workaround?
-Jim
Hi!
Q1: I recently updated to TM2alpha, and I'm quite fond of it! I mostly use
TM as my LaTeX editor. However, when I compile documents the log window
doesn't close when the PDF is viewed in Skim. I have made sure the "Keep log
window open" option is not checked. Actually I would like the window to show
only at errors
Q2: I would prefer to be able to chose the log window layout to be more
minimalistic, kind of terminal-like, as I find the default layout to be
unnecessary graphical and heavy. I've tried to google about a bit, but can't
seem to find if changing it is possible or not.
--
Holene
--
View this message in context: http://textmate.1073791.n5.nabble.com/Compiling-LaTeX-log-window-tp25794.ht…
Sent from the textmate users mailing list archive at Nabble.com.
Hi James
I'm not familiar with shell scripts. Where can I find some guidance on how to create and execute a shell script?
Ross Ahmed
Ecologist
--
07875533906
Twitter: @RossAhmed
LinkedIn: Ross Ahmed
The R bundle includes the following command:
R > Execute Selection/Document In R and > Show Result as Tooltip
How can I get this command to work in .Rnw files?
The tooltips disappear after a few seconds—is there anyway of showing/hiding the tooltips with a keyboard shortcut?
Ross Ahmed
twitter.com/RossAhmed
Hi
I haven't received email replies to my posts to the list for a while. Furthermore, I haven't received the password reminder email I've just requested. I've checked my junk folder and the emails are not in there.
How can I fix this?
Ross Ahmed
twitter.com/RossAhmed
I seem to have inconsistency in being able to open files in tabs.
Right now, even with a new tab, when I open a file, it opens in a
completely new window.
How do I open files in tabs?
Thanks.
> textmate-request(a)lists.macromates.com
> <mailto:textmate-request@lists.macromates.com>
> December 16, 2014 at 4:00 AM
> Send textmate mailing list submissions to
> textmate(a)lists.macromates.com
>
> To subscribe or unsubscribe via the World Wide Web, visit
> http://lists.macromates.com/listinfo/textmate
> or, via email, send a message with subject or body 'help' to
> textmate-request(a)lists.macromates.com
>
> You can reach the person managing the list at
> textmate-owner(a)lists.macromates.com
>
> When replying, please edit your Subject line so it is more specific
> than "Re: Contents of textmate digest..."
>
>
> Today's Topics:
>
> 1. Re: Committing to git submodule (Allan Odgaard)
>
>
> ----------------------------------------------------------------------
>
> Message: 1
> Date: Tue, 16 Dec 2014 14:32:07 +0700
> From: "Allan Odgaard" <mailinglist(a)textmate.org>
> To: "TextMate users" <textmate(a)lists.macromates.com>
> Subject: [TxMt] Re: Committing to git submodule
> Message-ID: <AD99A230-5449-4EED-90A0-32AD799576B4(a)textmate.org>
> Content-Type: text/plain; charset=utf-8; format=flowed
>
>
> Do you select the files in the file browser prior to comitting?
>
> For me, selecting files from a submodule and then running Git ? Commit
> works.
>
> The alternative would be to change the project folder first, as Ronald
> suggested. Both actions serve the purpose of directing the commit to the
> submodule. Without doing any of this, I don?t see my submodule?s
> files in the commit dialog (since we?ve initiated a commit in the
> parent repository).
>
>
> ------------------------------
>
> _______________________________________________
> textmate mailing list
> textmate(a)lists.macromates.com
> http://lists.macromates.com/listinfo/textmate
>
> End of textmate Digest, Vol 79, Issue 14
> ****************************************
--
Sent with Postbox <http://www.getpostbox.com>
I made a simple shell script and a similar system service via automator to turn .txt files into .pdf via xelatex. They work well but require a couple steps outside TextMate. It would be a great convenience to have a command in the markdown bundle that would add this capacity. I tried it but failed even when giving full path to pandoc and pandoc-citeproc which are in /usr/local/bin, or to xelatex. I have little knowledge in these matters and would appreciate any help.
Here is my little shell script:
#!/bin/sh
pandoc -S --filter pandoc-citeproc --latex-engine=xelatex "${1}" -o "${1}".pdf
My similar automator service:
PATH=$HOME/.cabal/bin:/usr/local/bin:/usr/texbin:$PATH
for file in "$@"
do
output=${file%%.*}.pdf
pandoc -S --filter pandoc-citeproc --latex-engine=xelatex "$file" -o "$output"
done
The metadata at the head of my .md or .txt files give extra info, such as title, font, bibliography, as in:
---
title: My title
author: My Name
date: \today
mainfont: Hoefler Text
bibliography: /Users/me/Library/texmf/bibtex/bib/data.bib
---
Any pointers towards making a markdown bundle command that accomplishes what the scripts above do would be great.
--Gildas
Is it possible to set a keyboard shortcut/menu selection that open a specific set of files as tabs.
For example:
Keyboard shortcut 1 will open files x1, x2 and 3
Keyboard shortcut 2 will open files y1 and y2
Ross
Twitter: @RossAhmed
Is committing to git submodules supposed to work? I have a project which
uses a git submodule. I open the project in TM, make some changes in the
submodule and then commit. It looks like everything went fine but in the
result window I get "Changes not staged for commit" and "no changes
added to commit". Running "git status" in the submodule I see that the
changes are not committed.
--
/Jacob Carlborg
Latest textmate changed the CMD+T dialog to a 'view based' list
I'd really love a slightly more compact view personally (smaller icon size)
but I'm gradually getting accustomed to it
One thing I've noticed is the list selection resets sometimes while the
list is filling..
1) Type a substring which matches lots of entries
2) TM auto selects the first entry as expected
3) Now arrow down to the next item in the list
Now, if the search is still chugging away, as soon as it finds a new entry,
the new match is appended to the list, but this also resets the selection
to the top item
The net result is that quite often I am typing a filename, arrow down, and
in between that and hitting enter, its very quickly reselecting the first
item, and Im opening the file I didn't intend to.
I'm hoping this is something you can reproduce and fix please?
Thanks
I recently upgraded to Yosemite and these two commands do not work. I change
the key to Command+D
and type it when i have \ref{|}. In mavericks this would give me a list of
all the labels. However now I get
the following
/Users/stef/Downloads/TextMate.app/Contents/SharedSupport/Bundles/LaTeX.tmbundle/Support/lib/LaTeXUtils.rb:204:in
`recursive_scan': undefined method `each_with_index' for
#<String:0x007fd96b06fcb0> (NoMethodError)
from
/Users/stef/Downloads/TextMate.app/Contents/SharedSupport/Bundles/LaTeX.tmbundle/Support/lib/LaTeXUtils.rb:234:in
`label_scan'
from
/Users/stef/Downloads/TextMate.app/Contents/SharedSupport/Bundles/LaTeX.tmbundle/Support/lib/LaTeXUtils.rb:57:in
`get_labels'
from /tmp/temp_textmate.Jyk2v5:8:in `<main>'
Has anyone encountered something similar?
--
View this message in context: http://textmate.1073791.n5.nabble.com/Label-and-Citation-Based-on-current-w…
Sent from the textmate users mailing list archive at Nabble.com.
I’m not sure this is the proper place to ask this, but:
SCM Diff Gutter bundle doesn’t show anything to me in the gutter.
I'm on the 2.0-beta.6.5, installed the bundle in Preferences, working on a project versioned with Git.
Is there anything else I should have done?
Caio
I have a suspicion this can’t be done, but perhaps I’ve just missed something.
I’m trying to write a snippet to insert operator declarations in Swift. The basic syntax is
(postfix|infix|prefix) operator <name> { }
But, if we are declaring an infix operator, we may also add
precedence <level>
associativity (left|right|none)
inside the curly brackets.
This is what I’ve got, based on the example at the end of section 6.8 in the manual.
${1|infix,prefix,postfix|} operator ${2:name} { ${1/(infix)|prefix|postfix/${1:+\n\tassociativity ${3|left,right, none|}\n\tprecedence${4:level}\n}/}}
As you can see if you can read that lot, I’m trying to use $3 and $4 as placeholders within the conditional insertion.
It doesn’t work of course. I assume this is because in that context $3 and $4 refer to captures from the regular expression. Is that so? Is there any way round this?
Thanks to anyone who can help
Nigel Chapman
There’s a neat feature in Find dialog. When you hold down ⌘ the file icon
for each file in results window changes to a number that you can press
to get to it.
Implementing something in similar fashion for file tabs would be
a great addition as it’s hard to guess the number when there’s
more than 5 tabs open.
Thanks.
In TM2, when a <script …> tag is prepended by any whitespace, the scope changes from `meta.tag.any.html` to `source.js.embedded.html`. This causes problems with the Comment Line command, as with the latter scope it prepends JS comments instead of HTML comments.
This problem exists when either HTML or PHP language is set for the document.
I don't think I've modified these language bundles. Any ideas for a fix?
Quinn
Hi,
I need to type special characters (ä, ü, ö, ß) quite often.
Normally on MacOS applications this is done by press-and-hold a key and
then select the special character. For applications where this gets in the
way (e.g. MacVim) this can be disabled.
TextMate 2 seems to have this feature disabled by default. I can't figure
out how to enable it. The command 'defaults write
com.macromates.TextMate.preview ApplePressAndHoldEnabled -bool true' does
not work.
Any tips?
I'm using TextMate 2.0-beta.6.3 on MacOS 10.10.1.
Best regards,
Markus
When I write javascript (in a .js file, bundle set to javascript) the behaviour when typing return after a curly bracket is different than when I write a shader (OpenGL bundle chosen) (the difference is the insertion of an extra line before the closing bracket). I see similar differences with indentation and where the cursor ends up after new line between bundles.
Is this behaviour something I can set or program myself? If so, how?
Kind Regards,
Bas
Hi,
I am finding that the Find in Project window stops responding (I cannot
type in the Find: field, though I can click checkboxes, etc.). This started
happening quite recently, I currently have Textmate v2 beta 6.
Thanks,
Anand
Running TM 2.0-beta.6.2 under Yosemite 10.10.1, if I open a file or project and click on the green button in the top left of the window, it switches to full-screen mode, as it should. However, if I have a window in normal mode, or no open file and I invoke the bundle editor, I still get the old pre-Yosemite behaviour, with the green button causing the window to toggle between the size I set it to, and some other size that is supposed to be the smallest that can enclose the content. If I’m already in full-screen mode and bring up the bundle editor, it opens at the full size of the screen, but the window title and traffic light buttons are visible, so it isn’t really full-screen. Also, the bundle editor is in the same space as the full-screen editing window, whereas if I open a new project from a full-screen window, it opens in its own space, also in full-screen, as I would expect.
Hardly a huge issue and I don’t know how far back it goes – I only just discovered it when I wanted more space to see a language grammar – but something doesn’t seem to be quite right.
Best wishes
Nigel Chapman
Using ⌃⌥⌘P to preview markdown text does nothing. To see the preview, I
must pull down from bundles to Markdown and select preview. That works
fine, but is slow. I am using 2.0-beta.6.3 on OS X 10.9.5. Can I get
some help?
--Lewis Overton
