- TextMate - lists.macromates.com

Latex Watch previewers' strange behavior on Leopard

by Gildas Hamel

I installed os-x 10.5 last weekend. Since then, when using TextMate 1436 and LatexWatch, I observe the following behavior: the pdf preview window, in TeXShop, doesn't gain focus and refresh until I click on it: it then refreshes . If I switch to Skim as previewer, no refresh even with clicking on the Skim window to give it focus. I had been using both for several months, without any problem whatsoever. Here is the console line I get regarding TeXShop as previewer: 10/29/07 10:03:11 AM TextMate[177] loadPlugIn: Dialog plug-in with same bundle identifier (com.macromates.dialog_plug-in) already loaded With Skim, I get the following window message: Unable to read notes for ~/Documents/Work/Writing/Journal/2007/July.pdf, but a Skim notes file with the same name was found. Do you want Skim to read the notes from this file? I click OK, but Skim doesn't refresh, though I have "check for file change" preference on (and have restarted everything). Here is the console reading concerning Skim: 10/29/07 10:24:14 AM TextMate[888] loadPlugIn: Dialog plug-in with same bundle identifier (com.macromates.dialog_plug-in) already loaded 10/29/07 10:24:26 AM Skim[926] .sdef error: Operation could not be completed. (NSXMLParserErrorDomain error 1549.) 10/29/07 10:24:26 AM Skim[926] line number: 2 I have sent as detailed a description I could to Apple Software/Support but thought I could get some help from the LateX people on TextMate. --Gildas Hamel

18 years, 3 months

1
0
0 0

Can't get Textmate to use Skim as a PDF viewer

by Bill McNeill

My Mac Mini is configured to use Skim as the PDF viewer called from Textmate's LaTeX bundle, however I still view compiled .PDF files inside Textmate. I need help configuring Textmate so that it will automatically launch Skim. Intel Mac Mini OS X: 10.4.10 Textmate version: 1.5.7 (1436) I have the following Textmate environment variables set in Preferences->Advanced->Shell Variables: TM_LATEX_ERRLVL 1 TM_LATEX_COMPILER latexmk.pl TM_LATEX_VIEWER Skim Skim Version: 0.9.3 (v15) Skim has Prefereces->Sync "Check for file changes" checked and the Preset set to "Textmate". I am using fink's LaTeX distribution. Skim works. It is my default .PDF viewer in Finder. I can use it to open and view .PDF files. If I successfully compile a LaTeX document in Textmate using apple-R, the compiled .PDF file appears in the "Typeset and View" window owned by Textmate instead of a Skim process. I have another computer, a Mac Book, that as far as I can tell is configured identically. On this machine, Textmate launches Skim as its .PDF viewer as expected. I'm out of ideas on how to debug this. Any suggestions? Thanks for any help. -- Bill McNeill http://staff.washington.edu/billmcn/index.shtml

18 years, 3 months

3
5
0 0

Bug in Ruby Bundle ctrl-{ snippet? (was Re: [TxMt] Ctrl key and shortcuts cease working)

by Rick DeNatale

I've noticed some ctrl-key snippet wierdness in the Ruby Bundle. Until the latest update, the ctrl-{ snippet to toggle blocks between {} and do;end forms either didn't work at all, or worked intermittently. I believe that this broke with the previous cutting-edge update some weeks ago. I just checked for updates, and I'm running 1436 as well, although the latest version mentioned when I view the release notes is 1435. Since Matt reported the problem with version 1436, I tried the snippet just now, and here is how this line of ruby code: a.each { | f| f } evolves after a sequence of pressing ctrl-{ with the cursor after either the { or do as appropriate. a.each do | f| f end a.each { |; f| f } a.each do |; f| f end a.each { |;; f| f } On 10/29/07, Matt Freels <matt(a)furtherin.net> wrote: > I just ran into a problem where after the recent update (version > 1436), all of TM's shortcuts involving the ctrl key broke. > > All of the emacs-like keybindings seem to still work, though. > > I've tried resetting all of the preferences i could think of > including a new user account. -- Rick DeNatale My blog on Ruby http://talklikeaduck.denhaven2.com/

18 years, 3 months

1
0
0 0

Theme colors messed up in last update

by Yann B

Since the last update, my HTML colors are messed up if I have some php at the top of the page, everything else after that is treated as "embedded source" from the "fonts & color" pref pan. If I just put: <?php ?> on top, it's fine, but if I put something like: <?php require_once('_php/some_file.php'); ?> The everything under is just a big chunk of the same color... Anyone else got that? And found a way to fix it... Any suggestion much appreciated. Thanks! - Yann ......................................... Yann Bettremieux minimal design LLC 244 Fifth Avenue Suite P233 New York, NY 10001-7604 USA tel / fax: 212.931.8525 email: yann(a)minimaldesign.net site: http://minimaldesign.net The information in this email may be confidential and/or legally privileged. This email is intended to be reviewed by only the individual or organization named above. If you are not the intended recipient or an authorized representative of the intended recipient, you are hereby notified that any review, dissemination or copying of this email and its attachments, if any, or the information contained herein is prohibited. If you have received this email in error, please immediately notify the sender by return email and delete this email from your system.

18 years, 3 months

2
1
0 0

Re: turning off auto formatting

by dushanm＠spinn.net

dvlogic wrote: > You can use the matlab bundle from the SVN repository. Octave is > mostly compatible with the matlab syntax. I didn't know there was such a bundle. Thanks for telling me. But where do I find it? I did find one from a few months ago (June) by kjosmoen, but this didn't seem to be on SVN - whereever that is located - and I don't know if it's the most recent. Regarding your other questions, I don't know the answers unfortunately. - Dushan

18 years, 3 months

2
1
0 0

Re: turning off auto formatting

by dushanm＠spinn.net

On 26 Oct 2007, at 01:07, DushanM wrote: >> I'm using TextMate to write some script files for the computational >> program Octave. These are text files, but TextMate insists on ad- >> ding formatting that I don't want. How do I turn this automatic >> formatting off? Ciarn Walsh wrote: > What kind of formatting are you talking about? Perhaps you mean > indentation? You should make sure you have the language set to Plain > Text by using the popup menu on the bottom of the window. Thank you, that's just what I needed. I didn't know where the switch was :) > Even better, of course, would be to write a grammar for Octave ;) Yes, that sounds like a good idea, but I'm too new to TextMate, and to Octave, to know how to do that. Maybe later as I learn more... - Dushan

18 years, 3 months

1
0
0 0

Re: [TxMt] Leopard Spaces

by Dave Winzler

Hi Steve, > Anyway, that's just a long way of saying that I don't think it's TM's > fault, but rather a design flaw in Spaces that I hope Apple will soon fix. Thanks for the quick reply and for explaining that, I'm glad it's not TextMate. I've used 3rd party virtual desktops for a few years, and I've never seen that behavior before. As you say, I hope Apple fixes it soon. Cheers, - d

18 years, 3 months

3
3
0 0

TmCodeBrowser Leopard update

by Gerd Knops

TmCodeBrowser needed a small fix to be compatible with Leopard. Version 1.09 is now available at http://www.cocoabits.com/TmCodeBrowser/ Gerd

18 years, 3 months

1
0
0 0

turning off auto formatting

by dushanm＠spinn.net

I'm using TextMate to write some script files for the computational program Octave. These are text files, but TextMate insists on adding formatting that I don't want. How do I turn this automatic formatting off? - Dushan PS, I had sent this same msg almost a week ago, but never saw it appear in the digest. But in the 'From:' I had forgotten to switch it from <not.for(a)public.display> to my real email address. Could this be the explanation?

18 years, 3 months

3
2
0 0

Leopard Spaces

by Dave Winzler

I'm wondering if anyone else is using TextMate with Leopard Spaces and seeing weird behavior. If I open up a document window in TextMate in Space 1 and leave it there, all is well and there's no problem. If I move the window to Space 2, when I Save the document stays on Space 2 (like it should), but the view switches back to Space 1. The same thing happens when hit Command-F to find: the document stays on Space 2 while the view switches back to Space 1. If I close TextMate, switch to Space 2, then open a document, everything stays on Space 2 and all is well. If I then move the document window to Space 1, I get the same problems with switching Spaces. Is this a quirk with my setup or is anyone else seeing this? - d

18 years, 3 months

4
3
0 0

rake files not working properly.

by Boysenberry Payne

When I try to run a rake file that's not on the top level of my project directories it refuses with this error: RakeMate v2.0.0 running on Ruby v1.8.6 (/usr/local/bin/ruby) >>> /Users/boysie/habitat/as/Rakefile Could not locate a Rakefile in /Users/boysie/habitat/as. my rake file is actually called rakefile.rb and is in /Users/boysie/ habitat/as/sprouts/HabitatClient/project. But I benefit from having access to the files outside of the project subdirectory so I made the project bigger than just the sprout project folder. Anyway to get it to find the rake file properly? thanks, Boysenberry

18 years, 3 months

1
0
0 0

Textmate update and Latex command error

by Ben Wooliscroft

As a recent adopter of Textmate I've had a great time improving productivity. But, today I was asked to update and relaunch. Dutifully, I closed my files and clicked yes. The program reopened and I opened my latex document, updated some text and hit apple R to run latex. This is the error I've received: /bin/bash: line 80: latexErrWarnHtml.py: command not found Error: PDF file not written to disk Apologies, but I have no idea what's happened here. Can someone help me get Latex back (okay the file, and everything else, still runs fine on Texshop, but I don't want to go back to editing there)? Thanks in advance Ben -- Dr. Ben Wooliscroft Senior Lecturer and Marketing Department Masters of Commerce director Marketing Department University of Otago PO Box 56 Dunedin New Zealand Ph. 64(3) 479 8445 Fax. 64(3) 479 8172

18 years, 3 months

3
2
0 0

Mailing lists and Bacn

by Jeremy Sachs

Hello. This is mostly unrelated, but I know you can all offer advice on this matter. I've been on this list for ten days, and since then I've received ~275 messages. The majority of them are unimportant to me, but some of them are. I need to figure out how to filter incoming messages, soon. What methods do you people use to sort TextMate mail? -Jeremy S.

18 years, 3 months

10
10
0 0

Python: SQL in triple " strings scope

by Alexey Blinov

Hi! I have something like this: cur.execute(""" select svc.post.id_post, svc.post.id_post_zone, svc.post.post_name as post_name, svc.post_zone.zone_name as zone_name, svc.post.id_post_type, svc.post_type.post_type_name, svc.post_type.post_color from svc.post inner join svc.post_zone on svc.post.id_post_zone = svc.post_zone.id_post_zone inner join svc.post_type on svc.post_type.id_post_type = svc.post.id_post_type where svc.post.id_post = :id """, {'id':post} ) And want to do something with that sql text if its sql (colorize or Command-R it via SQLDeveloper etc.). But scope for that string is "source.python ... string.quoted.double.block.python" Is it possible to fine tune scope selector? Any advice?

18 years, 3 months

7
18
0 0

"interpreter failed: No such file or directory" when using commands

by Chris Yates

I'm getting the message "interpreter failed: No such file or directory" when I try to use bundle commands that are written in Ruby, including commenting, HTML's "Convert selection to entities" and so on. I've verified that /usr/bin/env and /usr/bin/ruby are functioning properly outside of Textmate, and that the paths within the bundle scripts are correct (mostly using /usr/bin/env ruby). I've also tried adding a ~/.MacOSX/environment.plist file with my PATH information, but that doesn't seem to have any effect either (did make sure to log out. I also deleted the Textmate.app package and downloaded the latest version; no joy. Any other ideas on how to get this working again? It just stopped sometime yesterday morning and it's driving me nuts! -chris -- Chris Yates The Island Packet/The Beaufort Gazette

18 years, 3 months

3
12
0 0

Default "Save As..." filename...

by Brian Huddleston

Minor question/request, When working with templates or new files to have Textmate automatically adjust the default file name used when hitting SAVE to something other than "untitled"? For example, if I create a BASH template, and one of my fields is the file/program name, I wanted to be able to either: 1) hit "apple-s" and have Textmate pull a possible default filename from the area/field I had defined. or 2) select text; hit "apple-s"; and have the text selection become the default filename ##################################################################### # Program: ${1:filename.sh} <---THIS IS WHAT IM TRYING TO AUTO- CAPTURE TO THE SAVE DIALOG ##################################################################### # Version: ${2:0.1} # Date: ${3:`date`} # Author: ${4:John Doe (jdoe(a)email.com) # # Notes: # $5 # # ##################################################################### ... <insert lots of code here> ... ---- Brian H binarynomad(a)gmail.com http://www.binarynomad.com

18 years, 3 months

4
8
0 0

TeXniscope help

by Keith Penrod

I had TextMate set up to download "Cutting edge" and it just downloaded a new upgrade the other day. Before the download, I had everything working just fine with TeXniscope, but after I installed the upgrade, whenever I compile a LaTeX file in TextMate, it doesn't open TeXniscope. TeXniscope does update the PDF file (or open it if it's not already open) but it doesn't bring that file into focus like it did before. Even if I type Cmd-Opt-Ctrl-O nothing happens. In the typesetting dialog that comes up, there's a button that says "Preferences" and I have the "Show pdf automatically" option enabled, but it still doesn't bring TeXniscope into focus. Any ideas? Keith

18 years, 3 months

6
14
0 0

Snippet and regex

by Alain Matthes

hello:) I would like in this snippet ${TM_SELECTED_TEXT/(\s*).*/$1/m}\begin{${1:environment}} ${TM_SELECTED_TEXT/(.+)|\n\z/(?1:\t$0)/g} ${TM_SELECTED_TEXT/(\s*).*/$1/m}\end{${1:environment}} remove the \t and instead use white space, How to do that? Regards Alain

18 years, 3 months

3
4
0 0

Folder opening behavior

by Mike Brodhead

Sorry if this is well-trod ground, but I couldn't find anything in the archives... I'd like to see TextMate automatically detect the presence of a project file inside a folder which is being opened and use the project file instead of making a fresh, unsaved project from the folder. This is especially problematic when opening items from the command line. If I cd into a parent directory and see a directory which I'd like to open in TM, I must type "mate <dirname>" if there is no project file available, but if there is a project file, I must type "open <dirname>/<projname>". That is, I must use a different command depending on whether a project file is present or not. Furthermore, I must either remember whether I have created a project for a given directory, or take the time to manually check for one via ls. I'd much rather be able to take the same action every time and let TextMate do the right thing. Of course, the matter gets complicated if there is more than one project file in a particular folder. Perhaps in that case TM can prefer the one named to match the enclosing folder, ask the user, or just fall back to existing behavior. Does anybody have other thoughts on this? Thanks! --mkb

18 years, 3 months

2
1
0 0

Leopard TextMate 2 Pre-Alpha?

by Thomas Aylott

Ahoy Allan. I know you get bugged about this plenty, but… Now that Leopard is going to be out on Friday, when do you think you'll be releasing the first pre-alpha build of TextMate 2? I think you've talked about tm2 stuff before, but I'm not sure if there has ever been anything concrete mentioned about timing. I made a quick wiki page where we can collect all TM2 info. http://macromates.com/wiki/Main/TextMate2 —Thomas Aylott – subtleGradient—

18 years, 3 months

4
5
0 0

markdown_to_help.rb: tiny bug in JavaScript function goTo(id)

by Hans-Joerg Bibiko

Hi, I just saw that there is a tiny bug in the JavaScript function goTo (id) in markdown_to_help.rb. If you click at an item in the TOC it jumps to that anker but with a wrong offset, meaning the beginning of the anker is hidden caused by the TextMate header image. To solve that problem easily I would suggest to do the following if one predicts that the first image in the html source code is "header.png": markdown_to_help.rb: old: 68: function goTo (id) { 69: document.body.scrollTop = document.getElementById(id).offsetTop + 8; 70: } new: old: 68: function goTo (id) { 69: document.body.scrollTop = document.getElementById(id).offsetTop - document.images[0].height - 1; 70: } Cheers, --Hans

18 years, 3 months

2
1
0 0

Textmate Inserts strange '0]; 0];' string

by Sam Goldstein

I've been using TextMate for Rails development for several months now, and am a big fan. I have recently noticed one annoying bug, which is effecting my TextMate, and my collegue's who is working on the same projects. When I use the RoR bundle functions for Database migrations to, for example, rename/rename column Textmate inserts this strange string into the document. ]0; ]0; ]0; ]0; ]0; ]0; ]0; ]0; ]0; ]0; ]0; ]0; ]0; ]0; rename_column :table_name, :column_name, :new_column_name I've noticed this string popping up in other places (like at the top of a printout), but the migration issue is the most annoying. Also this problem is recent. I have done the same operations without encountering the bug in the past. Has anyone else encountered this problem? I can't find any reference to it online. Thanks Sam

18 years, 3 months

2
4
0 0

Leopard and TM 1.5.6

by Alain Matthes

hello :) I'm waiting for the Leopard DVD ( 2 days ) and I would like to know if Leopard changes some characteristics of TM 1.5.6 like speed in some actions Regards Alain

18 years, 3 months

1
0
0 0

Easy Generating of Scratch Snippets with the new TMTOOLS plug-in

by Hans-Joerg Bibiko

Hi, I just uploaded the new version 0.903 Download: http://email.eva.mpg.de/~bibiko/downloads/textmate/TMTools.tmplugin.zip Help: http://email.eva.mpg.de/~bibiko/downloads/textmate/tmtoolshelp.html "$TMTOOLS" help me Changes: added: get contentOfWindow added: get/set smartTyping added: get allBundles added: get uuidFor added: get defaultBundle added: get allBundleItems added: do checkUUID added: get bundlePathsForUUID Regarding to the issue of generating dynamic commands (esp. snippets) I attached an example bundle "SCRATCH SNIPPETS" which contains one command: "Create New Scratch Snippet". This command takes a selection which contains the snippet (last line := tab trigger = name of the new snippet) and installs a new snippet into the "SCRATCH SNIPPETS" bundle (scope is set to the current one automatically, but this can be changed easily). After doing that the new snippet is ready for usage. Of course, one can also create commands, macros, etc. dynamically ;) [This bundle requires TMTOOLS release 0903!] A demo movie is here: http://www.bibiko.de/TMscratchSnippet.mov (1.2MB) Have fun, Hans

18 years, 3 months

3
2
0 0

Markdown bundle unicode problem?

by Piero D'Ancona

Today I tried to use the nice Markdown Bundle, I drag-and-dropped an html file on an open window and here is what I got: Traceback (most recent call last): File "/Library/Application Support/TextMate/Bundles/Markdown.tmbundle /Support/bin/html2text.py", line 395, in <module> html2text_file(data) File "/Library/Application Support/TextMate/Bundles/Markdown.tmbundle /Support/bin/html2text.py", line 379, in html2text_file h.feed(html) File "/Library/Frameworks/Python.framework/Versions/2.5/lib /python2.5/sgmllib.py", line 99, in feed self.goahead(0) File "/Library/Frameworks/Python.framework/Versions/2.5/lib /python2.5/sgmllib.py", line 188, in goahead self.handle_entityref(name) File "/Library/Application Support/TextMate/Bundles/Markdown.tmbundle/Support/bin/html2text.py", line 168, in handle_entityref self.o(entityref(c)) File "/Library/Application Support/TextMate/Bundles/Markdown.tmbundle/Support/bin/html2text.py", line 368, in o self.out(data) UnicodeEncodeError: 'ascii' codec can't encode character u'\xc0' in position 0: ordinal not in range(128) Regards, Piero

18 years, 3 months

3
2
0 0

2026

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

TextMate