- TextMate - lists.macromates.com

by Venkatesh K

Hi, I am new to wonderful textmate and facing a problem. I am not sure where I am going wrong. When I try to "undo" using keyboard shortcut (command + z) I get something like this on screen. ---------------------------------------------------------------------------------------------------------------- File: /Users/venkatesh/Documents/test.php Word: </title Selection: ------------------------------------------------------------------------------------------------------------------ Any suggestions? Thanks, -- Venkatesh. K

18 years, 1 month

3
8
0 0

Re: [TxMt] Question/Suggestion: move selected file name into project tab?

by Dougal

I don't know a way to solve your problem, but one trick that'll make your current behavior a little nicer is Control + Option + W, which closes all open tabs, rather than jamming on Command + W. On Thu, Feb 14, 2008 at 1:13 PM, Steven Rowat <Steven_Rowat(a)sunshine.net> wrote: > Hi, > > > Daniel wrote: > > >Unless I'm living in a parallel dimension, the name of the currently viewed file is always at the very top of the window, next to the file icon above the tab bar. Is this not the case? > > > >Command + T (Go To File) is also your friend, as is Command + Option + (L/R) Arrow (Go to Previous/Next Tab, respectively). > > > Thank you; the Command+T I knew, the second I didn't. > > They will be useful, but don't solve the issue I tried to describe. > > Again: what I want is to be able to make a file display in the tabs at the top, when the tab list is already full, and the file is further down in the drop-down list. > > The only way I can do this at present, that I know of, is to hit Command-W twenty or more times and unload everything so I have a blank project, and then reload the files I want to have as tabs at the top. > > I find working with visible tabs, when I'm passing data between four or five files repeatedly (ie., several includes and a main php file) to be much faster and easier than finding them in the drop-down list over and over as I switch back and forth between them. So I'd like to put them at the top each time, before I begin editing them. I'm currently working with hundreds of files that often have only a single digit or number different, and it's very easy to get them confused unless all my ducks are in a row (in this case, literally, a row across the top). > > And sometimes there's only *one* that I'm missing from the top - but still, if it's way down the list, then there's no way to get it up there without unloading everything else before it (if I'm right about this). > > It's not a big deal; I can just unload and reload and it's quick. But still I think it would be cleaner if the file listing gave this option - to have a file tab become visible when this is preferred, so that the chosen file would change its position in the file listing and become the final visible tab. > > steven rowat > > > > ______________________________________________________________________ > For new threads USE THIS: textmate(a)lists.macromates.com > (threading gets destroyed and the universe will collapse if you don't) > http://lists.macromates.com/mailman/listinfo/textmate >

18 years, 1 month

3
2
0 0

Re: [TxMt] Keybinding change question: should Interface Builder show Bundle Menu items?

by Paul McCann

Hi Steven, it's much easier than that for Bundle items! Just open the bundle editor (control-option-command-b) and then find the item whose shortcut you wish to change. In this case just look in the HTML bundle (filter on "Command" using the pull down at the top left if you like) and it's there. There's a field at the bottom right for setting the key equivalent. Cheers, Paul

18 years, 1 month

2
1
0 0

Changing language for a specific file

by Nate Cavanaugh

Hi there, This may be a bit of a newbish question, but hopefully someone can answer it for me. I have quite a few JSP files, but a couple of them contain almost solely CSS information (with some serverside info sprinkled in). So, of course, I'd like those couple of files to be highlighted as CSS files, with the CSS bundle to be active for those files. However, the issue I am running into is that whenever I select the language for that file, it sticks for all JSPs. So what would be the best way to get those few files to be read as CSS, but keeping their same file names, etc? Thanks in advance for all of your help, -- View this message in context: http://www.nabble.com/Changing-language-for-a-specific-file-tp14630274p1463… Sent from the textmate users mailing list archive at Nabble.com.

18 years, 1 month

8
13
0 0

Including values of static variables in others?

by Daryl Spitzer

When defining "static variables" in Preferences->Advanced->Shell Variables, is it possible to include the values of static variables in the values of others? For example, I tried defining: P1 /some/path P2 $P1/subdir But the value of P2 is "$P1/subdir", not "/some/path/subdir" as I wish. -- Daryl Spitzer

18 years, 1 month

2
3
0 0

Re: Keybinding change question: should Interface Builder show Bundle Menu items?

by Steven Rowat

Hi, One additional note: as recommended in the TM Help, I tried downloading MenuMaster but still no joy. Even though it easily allows me to add a key binding for "Strip HTML Tags from Selection", using the keycommand still does nothing. Other (core) commands can be changed and work afterwards, so I suspect it's a bundle communcation issue. Another test seems to confirm this: when I change the "Insert Close Tag" command (in the HTML bundle), it visually shows a change, but the keyboard continues to work with the original default command. Restart TM, the change persists in the menu, but still uses the default from the keyboard. So I'm stuck, I think. Is there a way around this, that anyone knows of? steven rowat

18 years, 1 month

1
0
0 0

Keybinding change question: should Interface Builder show Bundle Menu items?

by Steven Rowat

Hi, I attempted to assign a key-binding to "Strip HTML Tags from Selection". A command installed via System Preferences doesn't work, and I assume this is as explained in the TM help: "Dynamic menu items i.e. those which change title depending on the programs state (like Fold Current Block / Selection) should be specified with their initial title. The initial title can be found by opening the MainMenu.nib file in Interface Builder (use Show Package Contents on TextMate and navigate to Contents ? Resources ? English.lproj)." So I have installed Interface Builder, found the MainMenu in the TM package, double-clicked it to open it in IB, and then double-clicked the MainMenu icon, which opens. However, the Bundle Menu item only drops down the first four global items; none of the Bundles show up. (Also, a small yellow tooltip opens on hover over the MainMenu icon, saying "One of the children has a bad/missing connection".) Is there a way to find out what name I should be using to bind "Strip HTML Tags from Selection"? Apparently the bundles aren't connected in IB - ? - or is there another way to access them? steven rowat

18 years, 1 month

1
0
0 0

Re: [TxMt] Problems with Rails Bundle and RakeMate

by schulty

timetrap-2 wrote: > > > On 2008-01-26 14:27:39 -0600, Sebastian said: > And just to confirm that the reverse is actually true, could somebody > confirm if you are running RakeMate tasks in the Rails bundle with 2.0 > projects without any trouble? Thanks. > I have the same setup as you do, Rails 2.0.2, Rake 0.8.1 and RakeMate r6193 and it works fine. A colleague has the same setup on his mac and he gets the error you do. Go figure... -- View this message in context: http://www.nabble.com/Problems-with-Rails-Bundle-and-RakeMate-tp15112223p15… Sent from the textmate users mailing list archive at Nabble.com.

18 years, 1 month

2
1
0 0

perl syntax choking

by Ilia Lobsanov

The perl syntax coloring is choking at this line: (split(/ /, `md5sum /tftpboot/$filename`, 2))[0];

18 years, 1 month

1
0
0 0

GetBundle won't install or update

by Erik Jones

Hi, A couple weeks ago GetBundle stopped both Installing and Updating bundles. I can list installed bundles and view the bundles in the repository but when I try to install or update I see the dialogue come up that say "This may take a while..." which then just disappears with no error whatsoever. I've tried removing all of the bundles that I'd previously installed via GetBundle as well as removing and reinstalling GetBundle itself. Any ideas? Erik Jones DBA | Emma® erik(a)myemma.com 800.595.4401 or 615.292.5888 615.292.0777 (fax) Emma helps organizations everywhere communicate & market in style. Visit us online at http://www.myemma.com

18 years, 1 month

3
5
0 0

Question/Suggestion: move selected file name into project tab?

by Steven Rowat

Greetings, I'm working in a TM project with dozens of files, and there are only room for about 5 or 6 names in the tabs across the top of the project window. This is creating an interface problem for me - if I select one of the files that's not across the top, by using the ">>" symbol to get to the list, I'm expecting it to move into the tab window (as the last item), but it doesn't. It stays invisible (i.e., no tab). So I'm working on a file that doesn't have its tab at the top. It's a small issue, but I've repeatedly found it confusing and/or frustrating to have to go to the ">>" window to see which file I'm currently working in, rather than just looking at the top and seeing which one is the 'clear white' tab. Is there any way around this? Or if not, can it be added as a future feature (that selecting a file would automatically make it visible as the last tab to the right, replacing whichever one is there)? Thanks Steven Rowat

18 years, 1 month

2
2
0 0

TextMate crashes within the Find Dialog after pressing TAB

by Hans-Joerg Bibiko

Hi, OK, this is a very tricky crash. I try to describe it as precise as possible: -TM runs for hours -I open the Find Dialog; regular expression is checked -I type something into the search textfield containing among others '\t' -I selected something '(.*?)' within the search textfield -I copy the selection apple+C -I move the caret to an other position within the search textfield -I paste the pasteboard content apple+V -I type something else and then I press TAB to move the focus to the replace textfield. TM crashes immediately. I tried several times to reproduce the crash but without success. It happens very sporadically and VERY VERY infrequently (up to now three four times). As attachment I send the crash report. Hopefully this report can help. G5 ppc, Mac OS 10.4.11, US keyboard, English environment, Input Method 'U.S.', TM 1.5.7 rev1455 Thanks, Hans

18 years, 1 month

4
5
0 0

Bug with comments and indentation in C++

by Chris Jefferson

A 'pattern' I use frequently seems to be confusing textmate's indentation of C++ code. The problem comes from writing things like: { // Comment If you simply write into textmate, you get something like: { { // Comment foo(); } } If I try to select and indent the code, I end up with: { { // Comment foo(); } } Now the problem is the other way! I tried looking at the how the indentation works, but it was some way beyond me I'm afraid. Any suggestions? Chris

18 years, 1 month

1
0
0 0

Question on tm_dialog: NIB as table editor

by Hans-Joerg Bibiko

Hi, I have a general question. Would it be possible to create a single NIB (without external Xcode) as a table editor? Given is a file containing TAB delimited data. These data should be sent to a tm_dialog NIB as plist. In principal this should work but the number of columns and rows can differ(?) The NIB file should contain an editable NSTableView and two buttons 'Cancel' and 'Save'. By pressing the button 'Save' the current content of the NSTableView should be outputted as plist. Is this possible? Many thanks for any hint in advance. Hans

18 years, 1 month

3
4
0 0

Blogging Bundle and WordPress 2.3.3

by Takashi Yoshida

Hi all, I'm using a TextMate to post to my blog based on WordPress 2.3.3. Before I upgraded to WordPress 2.3.3, I was able to upload my post using Blogging Bundle. But after updating to the WordPress 2.3.3, I cannot do so. Whenever I try to upload a post, I get the following message at the top. Received exception:HTTP-Error: 412 Precondition Failed Type: Blog Post (Markdown) Is anyone having the same issue? I know I can try downgrading my WordPress installation, but since it fixes some XML-RPC related security issue, I'd like to keep it. Are there any workaround for this issue? Thank you and regards, -- Takashi Yoshida tyoshida [at] mac [dot] com

18 years, 1 month

2
2
0 0

Subversion Hangs When I Try to Commit

by Steve Chanin

When I do a Status using the Subversion Bundle, it correctly shows what has changed. However, when I try to do a commit from the subversion popup page, the spinning dial starts up and never stops. After waiting a while, I killed the svn process at the command line. Once I did that, TM poped up a window asking for my SVN password. I have used svn at the command line for months to check in/out code and it works perfectly. My username on the svn repository is different from my username on my mac, but the first time I used svn from the command line, it failed and then I was able to put in the correct username and password. Since then (months ago), svn from the command line has worked perfectly. I think when svn is started by TM it must be using my mac user name rather than the cached name. Is there any way I can control this? After I type my comments and hit commit, in the status window the following appears: Authentication realm: PAC but I can’t see any place that I can type to supply my credentials. I don't think it's a problem with our subversion repository because the developer sitting next to me is able to commit from TextMate with no problems. Thanks, Steve _____________________ Steven Chanin steven_chanin at alum.mit.edu (415) 377-7503

18 years, 1 month

2
1
0 0

how to scroll down the page/log when "compiling"?

by Mojca Miklavec

Hello, I'm using a ConTeXt bundle (similar to LaTeX) from http://wiki.contextgarden.net/TextMate http://dl.contextgarden.net/support/context-tmbundle.dmg When "building" with ⌘+R an extra window with "html" content opens with a long log of the run. My question is: is it possible to scroll down to the bottom of that window automatically as the log is written to it? The command which creates that window looks approximately like that: ############################################## #!/usr/bin/env ruby $:.unshift "#{ENV['TM_SUPPORT_PATH']}/lib" $:.unshift File.join(File.dirname(__FILE__), "..", "lib") require 'scriptmate' require "parse_texexec_output" @file=File.basename(ENV['TM_FILEPATH']) @dir=File.dirname(ENV['TM_FILEPATH']) $cmd="texmfstart texexec #{xetex} --pass=\\'-halt-on-error -file-line-error\\' #{@file}" class CommandMate def emit_header puts html_head(:window_title=>"texexec", :page_title=>"typeset" , :sub_title=>"#{$cmd}") puts "<pre>" end end cmd_mate($cmd) ############################################## Thanks a lot, Mojca

18 years, 1 month

2
3
0 0

Multimarkdown preview a bit flakey

by John Laudun

To be honest, I can't tell if the failure to apply a style sheet is something odd in my TM set up or something flakey going on with my hosted set up. Would someone mind reminding how to make the call to a local style sheet so that I can test what's going on? Is it "file:///path/to/file.css" or is it "http://localhost/path/to/file.css " -- and with the latter I assume I have to have the built in web server running, yes? john

18 years, 1 month

2
2
0 0

[ANN] Ant Bundle

by Simon Gregory

I uploaded an Ant bundle to the review's section of the bundle repository a couple of months ago. There have been a few tweaks but it's now stable. I'm looking to getting it bumped up to the main repository so am canvasing here for some feedback. <http://macromates.com/svn/Bundles/trunk/Review/Bundles/Ant.tmbundle/> On top of the obvious build and run commands it's main features are integrated help, auto completion, document validation, and - the handiest for me - build target selection from a dialog pop-up, bound to ⇧⌘B. As Ant's a build system, and therefore language independent, you will have to configure the commands by adding the scope/s of your languages of choice, alongside possibly setting up an environmental variable to target your build.xml file of choice. Anything that helps/improves/patches, is more than welcome. Cheers, Simon

18 years, 1 month

2
2
0 0

punctuation.whitespace.function-call.leading.c

by Gerd Knops

I take exception to the C syntax gobbling up whitespace at the beginning of a line. It screws up my tab guides, as seen in the example below (before EXCEPTION). Gerd

18 years, 1 month

4
9
0 0

[YAML] tabs -> spaces

by Xavier Cambar

Hello everyone, I have a probably silly question for you concerning tabulations: Yaml can't stand tabulations, it says it requires spaces instead. How can I get TextMate to insert spaces instead of tabs? Regards, Xavier

18 years, 1 month

6
6
0 0

Xdebug bundle

by Steve Finkelstein

Hi all, Would anyone happen to be working on an Xdebug bundle? I'm thirsty for a PHP debugging environment as an extension in TextMate. Was just curious if something is available or if someone is in progress with this effort before I attempt to reinvent the wheel. Cheers! /sf

18 years, 1 month

3
3
0 0

highlight all instances under cursor

by Jamal Johnson

Something like Autotext is def what I'm looking for. I have a problem and a question however. Question: is there a way to integrate this so it's globally accessible so I don't have to change the language of a Java or Javascript file in order to use it? My problem is I'm receiving an error and it's not working. I've attached a screenshot. I looked through the files for Autotext and don't see where (or even what) the problem might be, maybe someone can help? Thanks again for all your ideas and help... On Feb 1, 2008 11:49 AM, Hans-Jörg Bibiko <bibiko(a)eva.mpg.de> wrote: > > On 01.02.2008, at 18:59, Daniel Stockman wrote: > > > On Feb 1, 2008, at 9:42 AM, Jamal Johnson wrote: > >> I'd like to be able to put my cursor on a word (in a JS file let's > >> say) and have that word highlighted _everywhere_ else in the > >> document making it very easy to find / see where it is. [...] Is > >> this possible? > > > > I dislike the idea of making the mouse cursor integral to a > > function of a text editor, so here's how you could approximate the > > behaviour via the keyboard (with menu path parenthesized): > > > > 1. With the caret inside or bordering the target word, press > > Control + W (Edit > Select > Word). Alternately, double-click the > > word itself. > > > > 2. Command + E (Edit > Find > Use Selection for Find) > > > > 3. Command + G (Edit > Find > Find Next) > > > > Your selection will now jump to each instance of the desired word > > on each subsequent Command + G. It's not as whizbang as Aptana, but > > I often feel IDEs do a lot more than necessary for certain tasks. > > I agree with Daniel. > > > But as a short note: By using TMTOOLS (an 'unofficial' hacker tool ;) > one could do this. > see my mail: http://comox.textdrive.com/pipermail/textmate/2007- > October/022827.html > > Cheers, > > Hans > > > ______________________________________________________________________ > For new threads USE THIS: textmate(a)lists.macromates.com > (threading gets destroyed and the universe will collapse if you don't) > http://lists.macromates.com/mailman/listinfo/textmate > -- --------------- .: Jamal :.

18 years, 1 month

2
1
0 0

Re[TxMt] mote editing of projects

by dakarp

I am currently a user of BBEdit. I'd like to be able to use TextMate if I could find a combination of an SFTP client and TextMate that would allow me to edit multiple files remotely as a project (grouped in the same window, with the drawer). Is there a combination of programs that will allow this? Working locally is not an option because the dev environment includes a huge MySQL database, among other things. But if I could work locally in a way that immediately and automatically updated remotely, that might be OK. -- View this message in context: http://www.nabble.com/Remote-editing-of-projects-tp15053548p15053548.html Sent from the textmate users mailing list archive at Nabble.com.

18 years, 1 month

7
9
0 0

bug - TM's Web Preview won't update from linked Css stylesheet

by Steven Rowat

Greetings, I've been using TextMate for several months, and I'm now starting my first multi-file project using the TextMate project interface. I've encountered what appears to me as a substantial bug (see title). I opened a ticket with a full description last week, but have received no reply so far. Here's the "Summary" from the start of that ticket: "Summary: At first, TM's Web Preview reads linked css stylesheet in the HTML header correctly, but then will not update when the stylesheet is changed. Browsers don't have this problem and show the new data as expected. (TM Web Preview seems to get 'stuck' using its original cached value, even when those values no longer exist in the css file. ) " Here's the full description, including my Troubleshooting attempts and exact steps to reproduce the bug: http://macromates.com/ticket/show?ticket_id=79950679 In addition I'm puzzled by the fact that I've found an exact description of the bug reported in this list in 2006. And there are no replies to that report either! Strange. Doesn't anyone besides me need to use the (wonderful) Live Web Preview with linked external style sheets? Or am I missing some hidden command or path configuration that will allow this to work? Best Regards, Steven Rowat

18 years, 1 month

4
4
0 0

2026

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

TextMate