- TextMate - lists.macromates.com

by Christoph Held

Hi rather than piggybacking on my other thread, I wanted to ask another question, namely which version control system to take for collaborative writing projects. I am basically starting afresh, so there is no code-base already in a certain repository format to be taken into account, and I am planning to use it for (collaborative) writing of text, mostly MultiMarkdown and maybe Latex if I get the hang of it. Most people advocating Subversion emphasize that it is widely used and rather easy to learn. As I am not planning to maintain source code in it anyway, these points may not be very important. It seems to me, the alternatives (Bazaar, Git, Mercurial to name a few I have read about) have matured quite a bit and I would not want to learn a specific system only to find out that previous users are migrating away from it for good reasons (that I may not see right now). So: if the requirements were: 1) up-to-date versioning 2) easy install 3) idiot friendly 4) collaboration friendly (merging of textfiles having been altered by several authors independently should be doable; see point 3 above) 5) offline work happens (branching and merging) 6) perhaps OS-independent (in case I can convince those other co-authors) 7) existence of a bundle providing integration into Textmate would be a huge plus (but consider that I may be satisfied with a very limited subset of what every versioning system offers already) 8) not sure if applicable: if a visualization tool such as Changes.app for diffing said textfiles be callable to compare versions that would be great, too. My experience with Filemerge et al, is limited because it does not seem to like UTF-8 very much (which I require). what would you choose? Thanks Christoph

18 years

13
22
0 0

PracTex journal tips, revision control and academic workflow

by Christoph Held

Hello all, perhaps this is a bit off-topic so please bear with me. Some regulars on this forum were instrumental in developing these thougths though which is what encouraed me to post here. I am a researcher doing some of my writing in Multimarkdown text files and put my work on a portable harddrive which I carry home after work, synchronize to my home computer and carry on working there. Ditto for the reverse. After reading a series of inspiring articles about how to use subversion repositories for academic writers over on Practex journal I am beginning to think that I could make better use of my resources. Here is what I plan to do: Go to work, read, write, take notes etc. Some of this takes place in textfiles, some will reside XML files (Tinderbox), and some also in binary files at the end of the day. I have access to a server that I would like to push all my changes and new data to and then go home. From home, I would like to pull all changes to my home computer and carry on. 1) Will the version control systems compare whole lines or do some kind of document comparison trying to find identical blocks regardless of (soft) line breaks? 2) what I don't know is how well this system will work for binary files, e.g. Aperture libraries, Word files from colleagues etc. Ideally, I'd like to just send the changed bits of files, not all files that have changed to save bandwith and time. If something went wrong I would want to go back in time. I am working on a localized system (meaning non-US) in case that is presenting a problem. I am not afraid of the command line but I have no experience with version control whatsoever because I was left with the impression that it was of little use outside source code development. Although I do some reading about subversion, git, mercurial, bazaar etc I need some guidance if I am barking up the right tree in the first place. I would greatly appreaciate your thoughts Prion

18 years

4
8
0 0

ExpanDrive for remote projects over SSH: snappy (at last)

by Jonathan Ragan-Kelley

Hello all, As a long-time TextMate user I'm well aware of the issues working with projects on remote filesystems -- I have been doing it day in and day out for just over three years now, using different combinations of tools. Like many of you, I've used Transmit for quick single-file edits and MacFusion/sshfs for heavier remote work for the past year or more, and they work well enough to be productive, but with well-known frustrations (latency, connection resilience). Lately I'm using ExpanDrive (http://www.magnetk.com/expandrive), which just launched officially. Same transport (SSH/SFTP), but with very aggressive caching and intelligent connection management under the hood. Together, they make it *way* snappier than sshfs on even high-latency links, and allow your mounts to stay live on finicky or intermittent connections, even as you sleep your laptop one place and wake it hours later on an entirely different network. It's a from-scratch new filesystem, not just a GUI for sshfs (though it does use the MacFUSE core), so its performance and stability are quite unlike what you may be used to. Of particular note (and this was a goal in development), the caching works well enough to largely eliminate the TextMate project focus lag problems we're all so familiar with by now, even over long-distance connections. (Full disclosure: I am tangentially connected with this project.) I think some of you will quite like it. -jrk

18 years

4
3
0 0

"Find" doesn't work when searching Java API docs

by Armon Dadgar

Does anyone else experience problems when searching the java api? Here is an example of what happens: 1. Press Control-H to open API 2. Apple-F to open find window 3. Type "String" 4. Goes to "AttributedString" in the side panel 5. Pressing the next button or Apple-G does nothing. I have tried the Regular Expressions option, Ignore Case, and Wrap Around. None of them seem to work. Very frustrating to need to continuously scroll down. Anyone have a solution, or experience the same thing?

18 years, 1 month

2
4
0 0

TM tokenizer is taking 100% CPU for long while using 100-200KB text files with single line

by Adam Strzelecki

Hello, I've sent a mail to Allan regarding the problem, but I want to share also this problem with all of you subscribed to the TM list. Maybe you have also encountered this? I'm working with few auto-generated FO (XML) files that have no line- breaks. You can reproduce such dummy file with: $ cd /tmp $ perl -e '{print "<html></html>" x 20000}' > test.html $ mate test.html As you see TM gonna take 100% CPU for a really long-long while until you get syntax highlight. Also any modification (line-break) causes TM to take again 100% CPU for a while. I'm aware it is rare case to work with such files, but is there any remedy for this problem? I have soft-wrap turned on, also using System Monitor I can see that it is tokenizer thread that is taking the whole CPU. Regards, -- Adam Strzelecki |: nanoant.com :|

18 years, 1 month

5
6
0 0

Simple query...

by Richard Dyce

... am I missing something? Can't seem to find a bundle for handling XSLT tags. Is there one? Thought I'd ask before I started to knock one up. R Richard Dyce MA (Cantab.) MBCS MIET | Director Richard Dyce Consultants Ltd. Business Consultancy | Training | Systems | Bespoke Applications Programming MySQL, PHP, JavaScript, FileMaker, AppleScript Studio Contact: Add me to your address book Web: http://dyce.com Bio: http://www.linkedin.com/in/rjdyce Registered Number: 4890568 VAT Number: 825 3090 44 Registered Office 9 Friary Gardens Winchester SO23 9AF Incorporated in England and Wales. Confidentiality Notice The contents of this e-mail and any attachments are intended for the named addressee only and may be confidential. Unless you are the named addressee or authorised to receive the e-mail of the named addressee you may not disclose, use or copy the contents of the e-mail. If you received the e-mail in error, please contact the sender immediately and then delete the e-mail. Richard Dyce Consultants Ltd. does not accept responsibility for this message and any views or opinions contained in this e-mail are solely those of the author unless expressly stated otherwise.

18 years, 1 month

4
5
0 0

User authentication when pushing in Mercurial bundle

by S. Moon

While switching from the terminal version of Mercurial to the Mercurial bundle, I have found out that it doesn't seem to support user authentication. While many repos do not use authentication, the one I am working on uses authentication when pushing to the central repo. Am I missing something, or is it simply something that isn't supported? Your very best, Sangwhan

18 years, 1 month

3
4
0 0

Find not responding the mouse

by Steve Kickert

I am hoping that this has been reported a work around available... We often have the Textmate 'Find in Project' results become unresponsive to mouse clicks. The only way to fix it is to restart Textmate. This also occurs occasionally with the 'Go to Symbol' window as well. Has anyone else had this happen. We have it on three different machines. -- Steve Kickert CEO Riverock Technologies www.riverocktech.com 952-232-5280 (direct) 612-965-1909 (mobile)

18 years, 1 month

2
1
0 0

Re: [TxMt] Blogging Bundle Timeout::Error in Leopard

by Tony Pelaez

I finally figured out what was giving me the timeout error in Leopard, when trying to do anything with the blogging bundle. It was an issue related to my router (an actiontec GT704WG supplied by Verizon) that only had problems with Leopard and not 10.4. Here is the solution (I stumbled upon this when trying to troubleshoot an issue connecting with adium as well): 1. Visit the router's configuration page and make note of the DNS server IP's (there should be 2 or three of them). Each router will be different on how you need to access the info, so use google if you don't know. 2. Open network preferences, click on the connection you are using and select advanced. 3. Click on the DNS tab and add the DNS entries that you got from your router. (Your router's IP should already be listed there.) 4. You should now be able to connect. http://forums.cocoaforge.com/viewtopic.php?t=16614&highlight=visit+routers+… Once I followed those steps the problem was solved. What a relief! I look forward to using the blogging bundle now! Thanks again for all your help. Tony On Jan 18, 2008, at 3:51 AM, Tony Pelaez wrote: > Though I have been successful at getting the blogging bundle to work > in Tiger, when I try to run it in Leopard and fetch a post I get the > following error: > > > /System/Library/Frameworks/Ruby.framework/Versions/1.8/usr/lib/ruby/ > 1.8/timeout.rb:54:in `open': execution expired (Timeout::Error) > from /System/Library/Frameworks/Ruby.framework/Versions/1.8/usr/lib/ > ruby/1.8/net/http.rb:564:in `connect' > from /System/Library/Frameworks/Ruby.framework/Versions/1.8/usr/lib/ > ruby/1.8/timeout.rb:56:in `timeout' > from /System/Library/Frameworks/Ruby.framework/Versions/1.8/usr/lib/ > ruby/1.8/timeout.rb:76:in `timeout' > from /System/Library/Frameworks/Ruby.framework/Versions/1.8/usr/lib/ > ruby/1.8/net/http.rb:564:in `connect' > from /System/Library/Frameworks/Ruby.framework/Versions/1.8/usr/lib/ > ruby/1.8/net/http.rb:557:in `do_start' > from /System/Library/Frameworks/Ruby.framework/Versions/1.8/usr/lib/ > ruby/1.8/net/http.rb:546:in `start' > from /System/Library/Frameworks/Ruby.framework/Versions/1.8/usr/lib/ > ruby/1.8/net/http.rb:1044:in `request' > from /System/Library/Frameworks/Ruby.framework/Versions/1.8/usr/lib/ > ruby/1.8/net/http.rb:1001:in `post2' > ... 9 levels... > from /Library/Application Support/TextMate/Support/lib/ui.rb:17:in > `dialog' > from /Library/Application Support/TextMate/Support/lib/progress.rb: > 42:in `call_with_progress' > from /Library/Application Support/TextMate/Bundles/ > Blogging.tmbundle/Support/lib/blogging.rb:551:in `fetch' > from /tmp/temp_textmate.b0oDWV:3 > > has anyone been able to get the blogging bundle to work in Leopard? > > My System: > OS X v. 10.5.1 > iMac Intel Core Duo > ruby 1.8.6 > wordpress 2.3 > > Any insight you can provide will be greatly appreciated. > > Tony >

18 years, 1 month

1
0
0 0

how to output like RubyMate?

by Matt Neuburg

I've got a Ruby script here, and I'd like its output to act like RubyMate's output - it should appear progressively as I call "puts" or "p" or whatever. In fact, I'd like the output to piggyback on whatever RubyMate is doing. But the script is not being run under RubyMate because it's part of a small bundle I've written myself and the place we're starting is a .txt file anyway (in other words, I've written a bundle that processes .txt files using a Ruby script). I'm betting there is some easy way to tell the bundle command that calls this Ruby script to output like RubyMate. What would that be? Thx - m. -- matt neuburg, phd = matt(a)tidbits.com, <http://www.tidbits.com/matt/> A fool + a tool + an autorelease pool = cool! One of the 2007 MacTech Top 25: <http://tinyurl.com/2rh4pf> AppleScript: the Definitive Guide - Second Edition! <http://www.amazon.com/gp/product/0596102119>

18 years, 1 month

2
3
0 0

quartz() device interactivity reduced without an event loop manager with RBundle

by Graham Smith

Still fighting on trying to get this to work. New problem now that I have got all the bundles installed and now X11 and CarbonEL is the error message in the subject When I create a plot the quartz window opens but freezes with the spinning beachball. Hopefully someone can help me again. Thanks, Graham

18 years, 1 month

3
4
0 0

Xcode ext.editor issues

by shin kurokawa

Assigning Textmate as the external editor, it works as expected for several projects. Double-clicking on a file name within Xcode will open it in Textmate. Then all of a sudden, files clicked in the Xcode project menu no longer open --- instead Xcode will pop up an error message saying it cannot find the files and the "perhaps it has been moved" thing. If I then disable Textmate as the external editor, everything will work fine again. This does not happen if I assign BBE instead of Textmate. Perhaps I've missed something. What am I doing wrong here? -Shin

18 years, 1 month

1
0
0 0

TM doesn't have trouble with RE, but I have.

by marios

Hi there. I'm twiddling here around with a RE problem and was wondering if you could help me. So here is the case. I want do do some tricky Syntax highlight matching, and wanted to have the visual sidebar with the line numbers. So in order to test this, I do inside TM Document window this: (^[^\n]*\n) This seems to work fine, and will select every single line in document window. But is I test the Javascript, which is: linenum: { exp: /(^[^\n]*\n)/, replacement: " 1$1\n" }, It doesn't do the replacement. So I also added a line-break in the replacement-string, after the capture register, as you can see above, but no honey. As you can see, I want to replace every single in the document, with the span instance above plus the Capture Register( Just like the Ruby code does in TM Bundle ), which is the whole line, whether it is empty or not. Any Ideas ? regards, marios

18 years, 1 month

3
4
0 0

Re: colours in textmate have disappeared

by L-J Lacey

thank you roger. you're a superstar. I knew it was something simple but was damned if I could figure it out. the language was on "DIFF" instead of "html" many thanks L-J >What language is showing in the popup at the bottom of the document? >Are you getting proper formatting other than color? >Roger, -- Roger Roelofs roger.roelofs(a)gmail.com ____________________________________________________________ L-J Lacey subtle as a fish developing websites today for tomorrow http://www.subtleasafish.com/ ----- Original Message ---- From: "textmate-request(a)lists.macromates.com" <textmate-request(a)lists.macromates.com> To: textmate(a)lists.macromates.com Sent: Thursday, 21 February, 2008 11:00:05 PM Subject: textmate Digest, Vol 41, Issue 23 Send textmate mailing list submissions to textmate(a)lists.macromates.com To subscribe or unsubscribe via the World Wide Web, visit http://lists.macromates.com/mailman/listinfo/textmate or, via email, send a message with subject or body 'help' to textmate-request(a)lists.macromates.com You can reach the person managing the list at textmate-owner(a)lists.macromates.com When replying, please edit your Subject line so it is more specific than "Re: Contents of textmate digest..." Today's Topics: 1. Re: colours in textmate have disappeared (L-J Lacey) 2. Re: Re: colours in textmate have disappeared (Roger Roelofs) 3. TM doesn't have trouble with RE, but I have. (marios) 4. New Rbundle and absolute beginner questions on how it works (Graham Smith) 5. Re: TM doesn't have trouble with RE, but I have. (Daniel Stockman) 6. Re: Working with pdfsync in latex (Christian) 7. Re: TM doesn't have trouble with RE, but I have. (marios) 8. Re: New Rbundle and absolute beginner questions on how it works (Paul McCann) 9. Re: Octave/Matlab bundle (Thomas Kjosmoen) 10. Re: TM doesn't have trouble with RE, but I have. (Sven Axelsson) 11. Re: New Rbundle and absolute beginner questions on how it works (Graham Smith) -----Inline Message Follows----- Hi Cristi. I did as advised but nothing has changed. any other ideas? thanks ______________________________________________________________________________________________________________ >first thing you should do is to delete plist file from file:///Users/cristi/Library/Preferences/com.macromates.textmate.plist >>On Feb 20, 2008 4:03 AM, L-J Lacey <larmyia(a)yahoo.com> wrote: Hi! I have searched everywhere I can to find the solution to this, so excuse me if it's available somewhere...I can't find it! What I think happened is that my daughter accidentally pressed "something" and suddenly textmate isn't displaying any colours when I'm coding. I've been to the preference panel, and tried changing the theme. downloaded new themes. nothing works. I can get the colour of the background to change, but none of the text will. It's doing my head in and I'd really appreciate it if anyone knows of a solution. thanks L-J __________________________________________________________ Sent from Yahoo! Mail - a smarter inbox http://uk.mail.yahoo.com -----Inline Message Follows----- L-J, On Feb 20, 2008, at 7:31 AM, L-J Lacey wrote: > --- 8< --- > What I think happened is that my daughter accidentally pressed > "something" and suddenly textmate isn't displaying any colours when > I'm > coding. I've been to the preference panel, and tried changing the > theme. downloaded new themes. nothing works. I can get the colour of > the background to change, but none of the text will. It's doing my > head in and I'd really appreciate it if anyone knows of a solution. What language is showing in the popup at the bottom of the document? Are you getting proper formatting other than color? Roger, -- Roger Roelofs roger.roelofs(a)gmail.com -----Inline Message Follows----- Hi there. I'm twiddling here around with a RE problem and was wondering if you could help me. So here is the case. I want do do some tricky Syntax highlight matching, and wanted to have the visual sidebar with the line numbers. So in order to test this, I do inside TM Document window this: (^[^\n]*\n) This seems to work fine, and will select every single line in document window. But is I test the Javascript, which is: linenum: { exp: /(^[^\n]*\n)/, replacement: " 1$1\n" }, It doesn't do the replacement. So I also added a line-break in the replacement-string, after the capture register, as you can see above, but no honey. As you can see, I want to replace every single in the document, with the span instance above plus the Capture Register( Just like the Ruby code does in TM Bundle ), which is the whole line, whether it is empty or not. Any Ideas ? regards, marios -----Inline Message Follows----- - Create HTML From Document / Selection with Line Numbers (TextMate) - Add Line Numbers to Document / Selection (Text) - Option + Command + L will show the line numbers in the gutter... You "want to replace every single"... what? "in the document". And I'm really perplexed by the reference to testing "the JavaScript", which AFAIK isn't what bundles are written/tested/interpreted in. I think more clarification is required so we can understand what exactly you want to do. ~ Daniel -----Inline Message Follows----- Am 19.02.2008 um 23:12 schrieb Paul McCann: > That should be enough to give you forward and backward synching: > shift-command-click for pdf=>code, and control-option-command-o for > code => pdf. > > Cheers, > Paul Thanks Paul for the clarification. Now it works fine and I am to pace around... Christian -----Inline Message Follows----- - Create HTML From Document / Selection with Line Numbers (TextMate) > - Add Line Numbers to Document / Selection (Text) > - Option + Command + L will show the line numbers in the gutter... > > You "want to replace every single"... what? "in the document". And I'm > really perplexed by the reference to testing "the JavaScript", which > AFAIK isn't what bundles are written/tested/interpreted in. > > I think more clarification is required so we can understand what exactly > you want to do. > > ~ Daniel > Sorry for the confusion. Ok, so how do we express ourselves better? Lemmy try once more. The question, that I am asking, is related to Regular Expressions and Javascript. ( So this is not a Support request at all ) I am working on a Plugin for Textpattern, which will use a mootools class, to append the corresponding DOM nodes with the classed span tags. This will all happen after the code that is to be displayed syntax highlighted is already encoded to entities. That works all so far. Now in order to get the same effect as we do have with the Make HTML document from source with Line numbers (Which is located in the TextMate Bundle and uses Ruby for that), yes the one that makes the span tags for the line numbers,I am trying to figure out, why the same Regular expression, that I mentioned in my previous post, would not work, when used as above. ( I even checked the Syntax with Flanagan's Book, also tried global matching but no luck ) So this is the task: Match every beginning of a line, including the first line of the document, and put that in Capture register one, then match every line until the end of the Line, end put that in Capture Register 2, then replace every instance, with some extra Markup (The spantags here ) plus Capture Register 2. This works from within TextMate, but not in Javascript. I hope, this explains better what I meant. regards, marios -----Inline Message Follows----- I would now expect to type "test" in Textmate, hit command R again and get something like: > test [1] 3 4 6 7 8 9 10 This should now work as you expect. It's a really nice environment! Good luck, Paul -----Inline Message Follows----- { name = 'comment.line.number-sign.shell'; > match = '(?<!\$)(#)(?!\{).*$\n?'; > captures = { 1 = { name = > 'punctuation.definition.comment.matlab'; }; }; > }, > > Might Matlab's bundle be patched to include this, or should an > independent bundle be introduced for Octave? > > Ben > > > ______________________________________________________________________ > For new threads USE THIS: textmate(a)lists.macromates.com > (threading gets destroyed and the universe will collapse if you don't) > http://lists.macromates.com/mailman/listinfo/textmate > > Hi Ben, Trying again, since Mailman bounced my message. I'm working on a Matlab bundle, and stumbled upon your message here. Well, I just added Octave support, so I'd appreciate if you'd check it out and give me some feedback. When the bundle is good enough I'll submit it to Allan. You can find it here: https://projects.ux.uis.no/projects/show/textmate Hope it's useful. --Thomas -- View this message in context: http://www.nabble.com/Octave-Matlab-bundle-tp15537210p15603337.html Sent from the textmate users mailing list archive at Nabble.com. -----Inline Message Follows----- On 20/02/2008, marios <tmtxpstuff(a)consking.com> wrote: > So this is the task: > > Match every beginning of a line, including the first line of the > document, and put that in Capture register one, then match every line > until the end of the Line, end put that in Capture Register 2, then > replace every instance, with some extra Markup (The spantags here ) plus > Capture Register 2. > > This works from within TextMate, but not in Javascript. OK, so this really hasn't anything to do with TextMate. Perhaps Javascript won't let you match newline characters? Try this regular expression instead, it may work better: ^(.*)$ -- Sven Axelsson ++++++++++[>++++++++++>+++++++++++>++++++++++>++++++ >++++<<<<<-]>++++.+.++++.>+++++.>+.<<-.>>+.>++++.<<. +++.>-.<<++.>>----.<++.>>>++++++.<<<<.>>++++.<----. -----Inline Message Follows----- Fair enough! Looks like those other files *are* zip files but lacked the extension. To get the Rdaemon version running rename "R" to "R.zip" and then double click it. You should see R Console (Rdaemon).tmbundle which can then be double clicked to add it to TextMate. Now open a new file, change the language to "R Console (Rdaemon)" from the selector at the bottom of the window. Type start[tab] and the daemon should start. There might be a small bug here in that you'll see two ">" signs. Just delete one of them and begin to enter R commands as you would in the console. If I type "test<-c(3,4, 6, 7, 8, 9, 10)" in TextMate and hit command R, An R runtime opens and the command is executed and this line appears in the runtime. I would now expect to type "test" in Textmate, hit command R again and get something like: > test [1] 3 4 6 7 8 9 10 This should now work as you expect. It's a really nice environment! Good luck, Paul ______________________________________________________________________ For new threads USE THIS: textmate(a)lists.macromates.com (threading gets destroyed and the universe will collapse if you don't) http://lists.macromates.com/mailman/listinfo/textmate _______________________________________________ textmate mailing list textmate(a)lists.macromates.com http://lists.macromates.com/mailman/listinfo/textmateHi Cristi. I did as advised but nothing has changed. any other ideas? thanks ______________________________________________________________________________________________________________ >first thing you should do is to delete plist file from file:///Users/cristi/Library/Preferences/com.macromates.textmate.plist >>On Feb 20, 2008 4:03 AM, L-J Lacey <larmyia(a)yahoo.com> wrote: Hi! I have searched everywhere I can to find the solution to this, so excuse me if it's available somewhere...I can't find it! What I think happened is that my daughter accidentally pressed "something" and suddenly textmate isn't displaying any colours when I'm coding. I've been to the preference panel, and tried changing the theme. downloaded new themes. nothing works. I can get the colour of the background to change, but none of the text will. It's doing my head in and I'd really appreciate it if anyone knows of a solution. thanks L-J __________________________________________________________ Sent from Yahoo! Mail - a smarter inbox http://uk.mail.yahoo.com L-J, On Feb 20, 2008, at 7:31 AM, L-J Lacey wrote: > --- 8< --- > What I think happened is that my daughter accidentally pressed > "something" and suddenly textmate isn't displaying any colours when > I'm > coding. I've been to the preference panel, and tried changing the > theme. downloaded new themes. nothing works. I can get the colour of > the background to change, but none of the text will. It's doing my > head in and I'd really appreciate it if anyone knows of a solution. What language is showing in the popup at the bottom of the document? Are you getting proper formatting other than color? Roger, -- Roger Roelofs roger.roelofs(a)gmail.com Hi there. I'm twiddling here around with a RE problem and was wondering if you could help me. So here is the case. I want do do some tricky Syntax highlight matching, and wanted to have the visual sidebar with the line numbers. So in order to test this, I do inside TM Document window this: (^[^\n]*\n) This seems to work fine, and will select every single line in document window. But is I test the Javascript, which is: linenum: { exp: /(^[^\n]*\n)/, replacement: " 1$1\n" }, It doesn't do the replacement. So I also added a line-break in the replacement-string, after the capture register, as you can see above, but no honey. As you can see, I want to replace every single in the document, with the span instance above plus the Capture Register( Just like the Ruby code does in TM Bundle ), which is the whole line, whether it is empty or not. Any Ideas ? regards, marios -----Inline Attachment Follows----- I wonder if someone with a lot of patience can help me with getting the basics of this working. I have downloaded the the three files that Hans-Jorg uploade to this forum, as they don't appear to be in the repository yet. Of the three files only one looked like the other bundle files and I copied it into the same directory where the old RBundle was located. I now have a new set of commands and updated the help index. However, I am not at all sure what to do with the other two files (Rdaemon and R,app) as these don't unzip to bundle files. I am also being extremely dim in getting things to work. If I type "test<-c(3,4, 6, 7, 8, 9, 10)" in TextMate and hit command R, An R runtime opens and the command is executed and this line appears in the runtime. I would now expect to type "test" in Textmate, hit command R again and get something like: > test [1] 3 4 6 7 8 9 10 in the runtime window. However, what I get is > test Error: object "test" not found Execution halted If I open R and have the RConsole open, then "send selection to r.app" works as expected, but as that has a rather clumsy shortcut key, I assume the shorter command R option is the "normal"way of working I accept my unfamiliarity with TextMate is probably the problem, but I would appreciate someone pointing out the obvious to me. Many thanks, Graham > So here is the case. I want do do some tricky Syntax highlight > matching, > and wanted to have the visual sidebar with the line numbers. > [...] > As you can see, I want to replace every single in the document, with > the > span instance above plus the Capture Register( Just like the Ruby code > does in TM Bundle ), which is the whole line, whether it is empty or > not. Actually, it's really hard to understand what you're aiming at, here. "Just like the Ruby code does in TM Bundle"... uh, which one? What command/snippet are you referring to? I see several ways of adding line numbers to a document (bundle name): - Create HTML From Document / Selection with Line Numbers (TextMate) - Add Line Numbers to Document / Selection (Text) - Option + Command + L will show the line numbers in the gutter... You "want to replace every single"... what? "in the document". And I'm really perplexed by the reference to testing "the JavaScript", which AFAIK isn't what bundles are written/tested/interpreted in. I think more clarification is required so we can understand what exactly you want to do. ~ Daniel Am 19.02.2008 um 23:12 schrieb Paul McCann: > That should be enough to give you forward and backward synching: > shift-command-click for pdf=>code, and control-option-command-o for > code => pdf. > > Cheers, > Paul Thanks Paul for the clarification. Now it works fine and I am to pace around... Christian Daniel Stockman wrote: >> So here is the case. I want do do some tricky Syntax highlight matching, >> and wanted to have the visual sidebar with the line numbers. >> [...] >> As you can see, I want to replace every single in the document, with the >> span instance above plus the Capture Register( Just like the Ruby code >> does in TM Bundle ), which is the whole line, whether it is empty or not. > > Actually, it's really hard to understand what you're aiming at, here. > "Just like the Ruby code does in TM Bundle"... uh, which one? What > command/snippet are you referring to? > > I see several ways of adding line numbers to a document (bundle name): > - Create HTML From Document / Selection with Line Numbers (TextMate) > - Add Line Numbers to Document / Selection (Text) > - Option + Command + L will show the line numbers in the gutter... > > You "want to replace every single"... what? "in the document". And I'm > really perplexed by the reference to testing "the JavaScript", which > AFAIK isn't what bundles are written/tested/interpreted in. > > I think more clarification is required so we can understand what exactly > you want to do. > > ~ Daniel > Sorry for the confusion. Ok, so how do we express ourselves better? Lemmy try once more. The question, that I am asking, is related to Regular Expressions and Javascript. ( So this is not a Support request at all ) I am working on a Plugin for Textpattern, which will use a mootools class, to append the corresponding DOM nodes with the classed span tags. This will all happen after the code that is to be displayed syntax highlighted is already encoded to entities. That works all so far. Now in order to get the same effect as we do have with the Make HTML document from source with Line numbers (Which is located in the TextMate Bundle and uses Ruby for that), yes the one that makes the span tags for the line numbers,I am trying to figure out, why the same Regular expression, that I mentioned in my previous post, would not work, when used as above. ( I even checked the Syntax with Flanagan's Book, also tried global matching but no luck ) So this is the task: Match every beginning of a line, including the first line of the document, and put that in Capture register one, then match every line until the end of the Line, end put that in Capture Register 2, then replace every instance, with some extra Markup (The spantags here ) plus Capture Register 2. This works from within TextMate, but not in Javascript. I hope, this explains better what I meant. regards, marios However, I am not at all sure what to do with the other two files (Rdaemon and R,app) as these don't unzip to bundle files. Fair enough! Looks like those other files *are* zip files but lacked the extension. To get the Rdaemon version running rename "R" to "R.zip" and then double click it. You should see R Console (Rdaemon).tmbundle which can then be double clicked to add it to TextMate. Now open a new file, change the language to "R Console (Rdaemon)" from the selector at the bottom of the window. Type start[tab] and the daemon should start. There might be a small bug here in that you'll see two ">" signs. Just delete one of them and begin to enter R commands as you would in the console. If I type "test<-c(3,4, 6, 7, 8, 9, 10)" in TextMate and hit command R, An R runtime opens and the command is executed and this line appears in the runtime. I would now expect to type "test" in Textmate, hit command R again and get something like: > test [1] 3 4 6 7 8 9 10 This should now work as you expect. It's a really nice environment! Good luck, Paul Ben Abbott wrote: > > I'm interested a bundle that supports Octave's syntax which is nearly > same as Matlab's ... plus a bit more. > > Additional Octave "features" are listed at the link below > > http://www.gnu.org/software/octave/FAQ.html#Octave-Features > > The additional syntax includes > * Comments with the number-sign, "#" > * Strings delimitted by double quotes, ex: "string" > * Line continuation by backslash. > > The Matlab bundle apparently respects single and double quotes, but is > agnostic to line continuation. Thus, the only additional thing needed for > Octave is support of the number-sign for comments. > > I cut the text below from the shell script bundle and pasted it into the > Matlab bundle, and it appears to work properly! > > { name = 'comment.line.number-sign.shell'; > match = '(?<!\$)(#)(?!\{).*$\n?'; > captures = { 1 = { name = > 'punctuation.definition.comment.matlab'; }; }; > }, > > Might Matlab's bundle be patched to include this, or should an > independent bundle be introduced for Octave? > > Ben > > > ______________________________________________________________________ > For new threads USE THIS: textmate(a)lists.macromates.com > (threading gets destroyed and the universe will collapse if you don't) > http://lists.macromates.com/mailman/listinfo/textmate > > Hi Ben, Trying again, since Mailman bounced my message. I'm working on a Matlab bundle, and stumbled upon your message here. Well, I just added Octave support, so I'd appreciate if you'd check it out and give me some feedback. When the bundle is good enough I'll submit it to Allan. You can find it here: https://projects.ux.uis.no/projects/show/textmate Hope it's useful. --Thomas -- View this message in context: http://www.nabble.com/Octave-Matlab-bundle-tp15537210p15603337.html Sent from the textmate users mailing list archive at Nabble.com. On 20/02/2008, marios <tmtxpstuff(a)consking.com> wrote: > So this is the task: > > Match every beginning of a line, including the first line of the > document, and put that in Capture register one, then match every line > until the end of the Line, end put that in Capture Register 2, then > replace every instance, with some extra Markup (The spantags here ) plus > Capture Register 2. > > This works from within TextMate, but not in Javascript. OK, so this really hasn't anything to do with TextMate. Perhaps Javascript won't let you match newline characters? Try this regular expression instead, it may work better: ^(.*)$ -- Sven Axelsson ++++++++++[>++++++++++>+++++++++++>++++++++++>++++++ >++++<<<<<-]>++++.+.++++.>+++++.>+.<<-.>>+.>++++.<<. +++.>-.<<++.>>----.<++.>>>++++++.<<<<.>>++++.<----. -----Inline Attachment Follows----- Paul, Thanks, that would all seems to make sense. And yes it does seem a nice environment, which played a small part in my decision to buy a Mac. Graham On 20/02/2008, Paul McCann <paul.mccann(a)adelaide.edu.au> wrote: Hi Graham, However, I am not at all sure what to do with the other two files (Rdaemon and R,app) as these don't unzip to bundle files. Fair enough! Looks like those other files *are* zip files but lacked the extension. To get the Rdaemon version running rename "R" to "R.zip" and then double click it. You should see R Console (Rdaemon).tmbundle which can then be double clicked to add it to TextMate. Now open a new file, change the language to "R Console (Rdaemon)" from the selector at the bottom of the window. Type start[tab] and the daemon should start. There might be a small bug here in that you'll see two ">" signs. Just delete one of them and begin to enter R commands as you would in the console. If I type "test<-c(3,4, 6, 7, 8, 9, 10)" in TextMate and hit command R, An R runtime opens and the command is executed and this line appears in the runtime. I would now expect to type "test" in Textmate, hit command R again and get something like: > test [1] 3 4 6 7 8 9 10 This should now work as you expect. It's a really nice environment! Good luck, Paul ______________________________________________________________________ For new threads USE THIS: textmate(a)lists.macromates.com (threading gets destroyed and the universe will collapse if you don't) http://lists.macromates.com/mailman/listinfo/textmate ___________________________________________________________ Rise to the challenge for Sport Relief with Yahoo! For Good http://uk.promotions.yahoo.com/forgood/

18 years, 1 month

1
0
0 0

New Rbundle and absolute beginner questions on how it works

by Graham Smith

I wonder if someone with a lot of patience can help me with getting the basics of this working. I have downloaded the the three files that Hans-Jorg uploade to this forum, as they don't appear to be in the repository yet. Of the three files only one looked like the other bundle files and I copied it into the same directory where the old RBundle was located. I now have a new set of commands and updated the help index. However, I am not at all sure what to do with the other two files (Rdaemon and R,app) as these don't unzip to bundle files. I am also being extremely dim in getting things to work. If I type "test<-c(3,4, 6, 7, 8, 9, 10)" in TextMate and hit command R, An R runtime opens and the command is executed and this line appears in the runtime. I would now expect to type "test" in Textmate, hit command R again and get something like: > test [1] 3 4 6 7 8 9 10 in the runtime window. However, what I get is > test Error: object "test" not found Execution halted If I open R and have the RConsole open, then "send selection to r.app" works as expected, but as that has a rather clumsy shortcut key, I assume the shorter command R option is the "normal"way of working I accept my unfamiliarity with TextMate is probably the problem, but I would appreciate someone pointing out the obvious to me. Many thanks, Graham

18 years, 1 month

2
2
0 0

Octave/Matlab bundle

by Ben Abbott

I'm interested a bundle that supports Octave's syntax which is nearly same as Matlab's ... plus a bit more. Additional Octave "features" are listed at the link below http://www.gnu.org/software/octave/FAQ.html#Octave-Features The additional syntax includes * Comments with the number-sign, "#" * Strings delimitted by double quotes, ex: "string" * Line continuation by backslash. The Matlab bundle apparently respects single and double quotes, but is agnostic to line continuation. Thus, the only additional thing needed for Octave is support of the number-sign for comments. I cut the text below from the shell script bundle and pasted it into the Matlab bundle, and it appears to work properly! { name = 'comment.line.number-sign.shell'; match = '(?<!\$)(#)(?!\{).*$\n?'; captures = { 1 = { name = 'punctuation.definition.comment.matlab'; }; }; }, Might Matlab's bundle be patched to include this, or should an independent bundle be introduced for Octave? Ben

18 years, 1 month

3
2
0 0

Working with pdfsync in latex

by Christian

Hi Folks, I am pretty new to textmate and I already love the way how to typeset only with textmate and to preview the PDF. I now tried pdfsync and can't get it to work. I have my preambel and include all my chapters with input. After typesetting, I highlighted a word with an included file and used "Show in PDF-Viewer (pdfsync)", but nothing happens. How ould I get this to work, so that I can jump from the code to the pdf and vice versa? Thanks in advance Christian

18 years, 1 month

6
8
0 0

Re: colours in textmate have disappeared

by L-J Lacey

Hi Cristi. I did as advised but nothing has changed. any other ideas? thanks ______________________________________________________________________________________________________________ >first thing you should do is to delete plist file from file:///Users/cristi/Library/Preferences/com.macromates.textmate.plist >>On Feb 20, 2008 4:03 AM, L-J Lacey <larmyia(a)yahoo.com> wrote: Hi! I have searched everywhere I can to find the solution to this, so excuse me if it's available somewhere...I can't find it! What I think happened is that my daughter accidentally pressed "something" and suddenly textmate isn't displaying any colours when I'm coding. I've been to the preference panel, and tried changing the theme. downloaded new themes. nothing works. I can get the colour of the background to change, but none of the text will. It's doing my head in and I'd really appreciate it if anyone knows of a solution. thanks L-J __________________________________________________________ Sent from Yahoo! Mail - a smarter inbox http://uk.mail.yahoo.com

18 years, 1 month

2
1
0 0

LaTeX trash aux query

by Nigel Green

Hi, I've just started using Textmate for LaTeX work now that I have managed to get it working nicely with skim (thanks all for the recent thread!). One thing I am confused by (and I couldn't see anything in the archive that mentioned this) is the function of the "trash aux files" command. I've used a similar thing in emacs before to clean up after compiling a PDF from a tex file, but Textmate's version seems to be a bit over- keen and it deletes the compiled PDF file too. Is this correct, or do I need to alter a setting somewhere? I've had a look in the preferences file and options window but I can't see there is a switch in either of those so I presume this is being taken care of by a support script? Any help would be appreciated. Many thanks, Nigel

18 years, 1 month

1
0
0 0

colours in textmate have disappeared

by L-J Lacey

Hi! I have searched everywhere I can to find the solution to this, so excuse me if it's available somewhere...I can't find it! What I think happened is that my daughter accidentally pressed "something" and suddenly textmate isn't displaying any colours when I'm coding. I've been to the preference panel, and tried changing the theme. downloaded new themes. nothing works. I can get the colour of the background to change, but none of the text will. It's doing my head in and I'd really appreciate it if anyone knows of a solution. thanks L-J ____________________________________________________________ L-J Lacey subtle as a fish developing websites today for tomorrow http://www.subtleasafish.com/ ___________________________________________________________ Support the World Aids Awareness campaign this month with Yahoo! For Good http://uk.promotions.yahoo.com/forgood/

18 years, 1 month

2
1
0 0

[RFC] TextMate Bundle for Maude

by Martin Kühl

Hi, I've developed a Bundle for the Maude system[1], a "high-performance reflective language and system supporting both equational and rewriting logic specification and programming for a wide range of applications", and I'd appreciate any feedback on it (the bundle, not Maude). To evaluate code (the first seven commands in the gear menu do that), the bundle assumes you have `maude' installed somewhere in your PATH, or set TM_MAUDE to the path of the executable. The coding aids make no such assumption. Included in the bundle is a MaudeMate "script" runner that parses Maude's output and error messages and emits fancy HTML. Unfortunately, TM's ScriptMate makes a few assumptions Maude doesn't fulfill, so it's based on a hacked rip-off of that module. The bundle is available via SVN[2]; you'll probably also need to download Maude[3] and a few code examples[4]. Again, I'd appreciate any feedback on what I've strung together. Thanks, Martin [1] http://maude.cs.uiuc.edu/ [2] http://mkhl.googlecode.com/svn/trunk/TextMate%20Bundles/Maude.tmbundle/ [3] http://maude.cs.uiuc.edu/download/ [4] http://maude.cs.uiuc.edu/maude2-manual/

18 years, 1 month

1
0
0 0

LaTeX Preview not remembering position

by Tobias Schmidt

I just converted from TeXShop to Textmate for my LaTeX editing needs and find myself missing one of TeXShop's features: After typesetting a document, TeXShop remembers which page of the PDF document you were last looking at and after typesetting again automatically jumps to that page. Textmate's Typeset & View, in contrast, always takes me to the first page of the document no matter what I was looking at before which is an enormous pain when I'm tweaking page 38... Is there any way I can get this functionality in Textmate? Cheers, Tobias

18 years, 1 month

2
1
0 0

Re: revision control and academic workflow

by John Laudun

Dear Chris, You're not alone, and I enjoyed reading your note and Haris' reply. I seem to be in a similar situation to you. I too am an academic, though I am in the humanities. I occasionally think about just going "all LaTeX" but I am held in check by the fact that I would be the only using it in my field, in my department, in my building. I too have settled on a workflow built around MultiMarkdown because of its readability, its text file nature, and because it outputs such beautiful looking documents when you pass it through a CSS of your choosing. I currently rely on other apps for my backup, but I have really longed for a svn set up, because I really would like the finer-grained control. With the switch to Leopard, I'm thinking of trying to make the push sometime soon, so please keep at least me posted on what you learn and how to do these things. (Jacob is laughing somewhere that I still haven't done this -- I tried this past summer to get an svn up and running, but I just didn't have the time to dedicate to what was a project in and of itself.) john -- John Laudun Department of English University of Louisiana – Lafayette Lafayette, LA 70504-4691 337-482-5493 laudun(a)louisiana.edu

18 years, 1 month

1
0
0 0

Typing eats up system resources

by gandalfxviv

This is the first time I've ever experienced this problem. I was typing along in TextMate and suddenly it started to get really sluggish, so I pulled up activity monitor and whenever I edit text in TextMate, it shoots up to 50 or 60% CPU usage. I have an Intel Core 2 Duo MBP running OSX 10.5.2 and TextMate Version 1.5.7 (1455). I usually leave TextMate open for days at a time and I've never had this problem before. I tried closing TextMate and reopening and that didn't do anything. Any ideas what might be causing that? -- View this message in context: http://www.nabble.com/Typing-eats-up-system-resources-tp15546901p15546901.h… Sent from the textmate users mailing list archive at Nabble.com.

18 years, 1 month

5
4
0 0

Re: [TxMt] Question/Suggestion: move selected file name into project tab?

by Paul McCann

Hi again, >I don't know a way to solve your problem, but one trick that'll make > >your current behavior a little nicer is Control + Option + W, which > >closes all open tabs, rather than jamming on Command + W. > > That would be a help, but it's not working for me. Can you tell me where > it is in the menus (I can't find it), so I can adjust it with Menu Master? > Or if it's not in the menus, how do I get access to it? There's a slip in the first-quoted message: it's control-COMMAND-w to close all tabs, and the menu it sits in is "File". Cheers, Paul

18 years, 1 month

3
3
0 0

2026

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

TextMate