- TextMate - lists.macromates.com

by Mark Miller

Hi, This is a first post so if this isn't the right place or I didn't search well enough, please let me know. I know you can select the contents between brackets with command-shift-B. However, this is the same key sequence that was select for breakpoints when coding in Ruby. I realize I could customize any way I want, but I figured I must be missing a fundamental way or working in TextMate if this key option was used for two different operations. Is there an easy trick to get the one I want? Thanks, Mark

19 years, 2 months

2
1
0 0

Re: Re: [TxMt] Flex 2 Bundle

by Simon Gregory

>I've been playing with the flex bundles for a while now. It looks like there are lots of different ways of building Flex at this point. I've been using rake: >http://theblogthatnoonereads.tunasoft.com/2007/04/29/building-flex-on-rails/ Yes, there's a lot of ways to invoke mxmlc/compc. Ideally I'd like to see just one build and one run command in the ActionScript 3 bundle but don't want to impose a particular method. Currently there is: mxmlc Ant fsch (A wrapper for mxmlc which caches the build in RAM and dramatically speeds up compilation - on my current project mxmlc takes 20+ seconds, with fsch this comes down to 4-5 seconds) Shell - project specific custom file. I'd imagine that we could quickly add rake and yaml to the equation too. Does anyone have any suggestions of a way to handle this? Would it be best to add the various build methods as templates then check for custom build scrips within a TM project before defaulting to a basic build? Are there any other bundle developers who've solved a similar problem? Cheers, Simon

19 years, 2 months

3
2
0 0

GetBundle -- svn version issue

by Andrew Jaffe

Hi- I really like the handy getBundle bundle... but it's been giving me some trouble. I've upgraded my own version of svn to 1.4.3. Unfortunately, this is backwards-incompatible with getBundle's internal version, which is 1.3. Since I've updated some of my bundles -- and the support folder -- by hand, it's used my newer version, but then getBundle's svn can no longer update them. Perhaps getBundle should probably use the local svn if that's possible? (Indeed it only uses the local svnversion, which will also cause a mismatch.) Yours, Andrew

19 years, 2 months

1
0
0 0

Quicksilver action adding invisible characters

by Graham English

Hello, I started using the GTDAlt bundle and I wrote a Quicksilver action in applescript to append text to my inbox.txt. I know I can just use Quicksilver's append text but I wanted to write something custom. The problem is it is adding invisible characters between every letter. Any ideas why? Here's my script: using terms from application "Quicksilver" on process text theText set this_file to (((path to desktop folder) as text) & "GTD:" & "inbox.txt") my write_to_file(theText, this_file, true) end process text end using terms from on write_to_file(theText, target_file, append_data) try set the target_file to the target_file as text set the open_target_file to ¬ open for access file target_file with write permission if append_data is false then ¬ set eof of the open_target_file to 0 write theText to the open_target_file starting at eof close access the open_target_file return true on error try close access file target_file end try return false end try end write_to_file Warmest regards, Graham English

19 years, 2 months

2
2
0 0

Open Recent not working

by James Frost

Hi, My File -> Open Recent menu item has stopped working. I click on an item and it doesn't open. The File menu stays highlighted until I do something else, and the document just doesn't open. Does anyone know what would cause this? Thanks, James Frost

19 years, 2 months

1
1
0 0

Symbol window on 2nd screen

by Jasper van der Meulen

Hi, I'm every so often on another location where i work on two screen's. The only thing i always need to adjust once is to drag the symbol window to the screen where the main textmate window is.\ Is there a config thing i can set, or is it a feature for TM2 ? ps: the other windows (goto file, bundle editor, etc) also come in the wrong screen Regards J.

19 years, 2 months

2
2
0 0

New Home of the GetBundle

by Sebastian Gräßl

Hello there! I just wanted to tell you that the GetBundle has now it's own page and will get some improvements like turning it into a Plugin(maybe). The new site can be found at http://projects.validcode.net/getbundle Sebastian

19 years, 2 months

3
3
0 0

LaTeX Bundle: Typeset & View: Don't close on warnings

by Florian Gilcher

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi, i have a small problem with the Latex Bundle. When using Typset & View the popup window immediately closes after compile, if no error is thrown. If a warning is displayed, you can only see that there are warnings happening, but not where and why. Is there a possibility to have the windows stay on screen in that case? Bundle Version is... today. Greetings Florian -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.3 (Darwin) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org iD8DBQFGImiC8RlGMqQ8m7oRAi2JAJwNnScqERFZMoJwpj/OZ7iwQ0azYgCgih+3 V086jilrx9abBJEFXvBevY4= =BJt/ -----END PGP SIGNATURE-----

19 years, 2 months

4
4
0 0

Several newbie-questions

by Thomas Mai

Hi! I'm new to TextMate - and so there came up some questions which I've gathered here. Thanks in advance for any tip! Bye, Tom How can I open the file at the cursor directly from inside the editor? Can TM hilight the matching brackets? (I'm using "pastels on dark" color scheme; if thats important...) How do I make the cursor follow when I've scrolled some pages with Ctrl-CursorUp/Down? "Standard-behaviour" is that the cursor stays where I've started. How do I find the next match (for the same criteria) when searching incrementally with Ctrl+S? Is there a simple calculator in TM? I prefer bookmarks that I can access directly, e.g. something like ^1 for line 40, ^2 for line 88 etc - instead of F2. Can I have that with TM?

19 years, 2 months

7
13
0 0

Is the following pdfsync-instruction right?

by Niels Kobschätzki

Hi! Skim (skim-app.sourceforge.net), a very neat and free pdf-viewer supports now pdfsync and they set up a wiki with some instructions how to enable Skim as viewer for pdfsync in Textmate. But I think the instructions are more complex than they should be. The site is: http://skim-app.sourceforge.net/wiki/index.php/ LaTeX_and_PDFSync Isn't it even in the standard-install of TextMate only necessary to set the Shell Variable TM_LATEX_VIEWER to Skim? Niels

19 years, 2 months

8
36
0 0

Feature request: shortcut to re-order tabs

by Andy Armstrong

I fully expect someone to point out that this already exists :) I typically move between tabs using Cmd-Opt-Left and Cmd-Opt-Right. Typically I try to arrange the tabs so that the set of files I'm actively switching between are adjacent. If Cmd-Opt-Ctrl-Left and Cmd- Opt-Ctrl-Right moved the current tab to the left or right I could re- order the tabs as part of navigating to a different tab just by holding Ctrl down. Say I have four tabs: [*F1*] [ F2 ] [ F3 ] [ F4 ] I'm on F1 and I want to go to F3. I'd also like F1 and F3 to be adjacent to each other because I'm going to be switching between them. So Cmd-Opt-Ctrl-Right does [ F2 ] [*F1*] [ F3 ] [ F4 ] and then Cmd-Opt-Right does [ F2 ] [ F1 ] [*F3*] [ F4 ] -- Andy Armstrong, hexten.net

19 years, 2 months

2
1
0 0

Auto-save every n minutes?

by James Frost

Hi! Firstly, Textmate is a fantastic text editor! I use it all the time, and it constantly amazes me with something new and clever :-) Anyway, I would like to either request a new feature, or ask if anybody has an idea how/if it could be scripted as an automated task? Essentially I'd like to be able to set, on a per-document basis, the ability to have the document automatically save itself every minutes. Today, my macbook crashed, and I lost a fairly big chunk of an essay. It may actually be better if a way could be suggested to simply automate a task every n minutes - that way, I could have Textmate automatically commit a document to my svn/bzr repository! That'd be great! So... is this possible? Any help would be greatly appreciated. Thank you! James Frost

19 years, 2 months

2
1
0 0

Quicksilver text entry to TextMate?

by Graham English

Is there a way to send a value to ${TM_BLOG_TITLE} through applescript in the TextMate blogging bundle? I'm thinking about creating a Quicksilver action that can use the text from Quicksilver to fill the title of the blogging HTML template. Thanks, Graham English

19 years, 2 months

1
1
0 0

Dynamic Snipplr Bundle

by Tyler Hall

Hi. My name is Tyler - I run Snipplr.com. (Allan blogged about us last summer.) I'm working on an updated bundle for Snipplr, and was wondering if anyone would be interested in helping me test it? (BTW: For the rest of this message when I say "snippet", I'm referring to a snippet stored on Snipplr, not a TextMate snippet.) I ask because I'm doing some strange stuff with it. Previously, I was sending a request to the server each time the user requested a snippet. This new version syncs your snippets and favorites directly into TextMate's bundle menu - giving you offline access to all your code stored in Snipplr. To do this, I'm generating the TextMate bundle on-the-fly using PHP on the server - so each user's bundle is customized for their account. I'm creating the tmSnippet's, tmBundle's, plists, etc.. It's also got an auto-update feature to keep the bundle's snippets in sync. So far everything is working. I need to add code to make it handle errors gracefully and also to check the integrity of the bundle before it installs an update of itself. Any feedback on how I can improve the way I'm doing this would be greatly appreciated. More info about the new bundle (and how to get it!) is available here: http://blog.snipplr.com/2007/05/09/new-snipplr-textmate-bundle-beta/ Thanks :)

19 years, 2 months

1
0
0 0

as3 - svn -> Can't convert string from 'UTF-8' to native encoding - scope selector

by Joachim

first of all, you're doing a great job on the as3 bundle !! *) why is the scope selector of the build and other commands source.actionscript.3 , while in the language file the scope is source.actionscript3. When trying to build, the shortcut won't work. With scope selector source.actionscript3 it does. herewith a delta file . *) that when you checkout the actionscript 3 bundle you get the following error svn co http://macromates.com/svn/Bundles/trunk/Review/Bundles/ActionScript\ 3.tmbundle svn: Can't convert string from 'UTF-8' to native encoding: svn: ActionScript 3.tmbundle/Commands/Insert Color?\226?\128?\166.tmCommand greetz Joachim --------------------------------------- http://4d.ratubagus.net

19 years, 2 months

2
2
0 0

Move blocks of text using "Go To Symbol"?

by Jenny Harrison

Hello everyone, I live in the latex bundle, but this feature request may be relevant to others. I would like to be able to move blocks of text in the latex file by simply moving corresponding headers in the "Go to Symbol" sidebar. This would replace my need to use OminOutliner to organize material. (There seems to be no satisfactory way to port a Latex file from TextMate into OmniOutliner without a great deal of hand work.) A related feature request would be a Latex logic checker. No matter how we move blocks around, we may wish to check that the references maintain their logical ordering. It would be nice to have a command to do this for us, especially for long documents. I am no programmer, but I imagine this should be easy to do -- find each \ref that occurs before its \label. Cheers, Jenny ____________________________________ Jenny Harrison Professor of Mathematics University of California, Berkeley 851 Evans Hall Berkeley CA 94720-3270 Tele: 510-642-9666 Fax: 510-642-5270 Email: harrison(a)math.berkeley.edu Web: http://math.berkeley.edu/~harrison/

19 years, 2 months

5
5
0 0

subversion menu

by Grant Hollingworth

This is a repeat of a comment I made on the latest TextMate blog post[1]. I remember some discussion on the list about the Subversion menu, but I can't find it. The command that I always want for Subversion is Diff with Newest. Why is that the second option? The CVS bundle has it as the first option. Do people really use Diff Revisions that often? The diff commands start at the eleventh position in the menu and so don't have number shortcuts. They also all start with 'Diff', so pressing 'd' only jumps to the first command. [1] http://macromates.com/blog/archives/2007/05/06/textmates-many-key-shortcuts/

19 years, 2 months

5
6
0 0

Perl indentation question

by André Cruz

Hello. I don't know who is responsible for the indentation of Perl buffers (textmate author or bundle author?) but there is a problem with structures of the kind: ### my $teste; $sth_comments->bind_columns( undef, \$journalid, \$jtalkid ); my $teste2; ### This is correctly indented, according to the Text->Indent Selection command. But I was expecting this: ### my $teste; $sth_comments->bind_columns( undef, \$journalid, \$jtalkid ); my $teste2; ### Regards, André Cruz

19 years, 2 months

3
6
0 0

XCode - Clickable error messages

by Benjamin Jackson

Hi all, Just put this patch together to add clickable error messages to the XCode bundle: Have a nice day. - Ben

19 years, 2 months

4
13
0 0

Changing look of Markdown docs

by Nigel Green

Hi there, I use Markdown format for all of my plain text files - both to convert to HTML for export and to help organise my files. I find the syntax highlighting of headings and lists really helps me keep large files organised - especially with using curly braces to 'section' material and keep it folded away. Is it possible to change the way headings are recognised? In particular I would like to have the following: ## Heading 1 { Some text in here... } ## Heading 2 { Some text in here... } ## Heading 3 { Some text in here... } This currently only picks up the first heading, seeing the others as meta.paragraph.markdown, whereas leaving in line breaks: ## Heading 1 { Some text in here... } ## Heading 2 { Some text in here... } ## Heading 3 { Some text in here... } Means I get all the headings recognised correctly. Both versions above are recognised and converted to HTML correctly by the Markdown.pl script so I presume the highlighting is down to the language grammar? I looked at it and tried to change it myself but broke all the other formatting as well so think I need some professional input on this one! I know its not a life-changing query but I'd like to understand the language grammar stuff better and this looks like a good starter project!! Thanks, Nigel

19 years, 2 months

2
1
0 0

Scope and Preprocessing for personal Markup

by J Fischer

Hi, Within the time constraints, I've done what searching I can through the docs, wiki, and mailing list archives to get a personal markup bundle working. Thanks to the clear documentation and a lot of the archived posts here, I have all the snippets and syntax coloring working. However, there are a couple of things that I still haven't worked out, which I could use a little help with. I apologize if they've been covered before and I missed them. If I had more time, I'd keep searching around for the answers, but with an upcoming deadline, I just have to get some guidance. My bundle is called "jmarkup" and I've set most of the scope selectors to "text." (BTW, I still don't competely get how to choose scope selectors, despite reading that section many times.) I'll probably do most of my writing in Latex or Markdown (or MMD), and currently I have to go back and forth between syntax coloring for either Latex or jmarkup. 1) Can I somehow set my scope so that I can see it colored while I'm in Latex and MMD? 2) Could someone point me to a place explaining how I could process my markup before the latex. E.g. So that when I hit the key combo to preview the Latex, everything is preprocessed to replace my [[note syntax ]] with Latex markup for left and right margin notes. 3) Referring to #2 above, could I have separate processing-replacements set up for whether I was making an output for myself (e.g. working draft with all notes and markup) or for my advisor (e.g. print draft without notes and hiding my in-line styles, like "revise" or "check facts")? 4) What would the best bundle be to use as an example of how to gather all "action" markups in to a separate document? For example, I might have a fact that is suffixed with [!check this!] and I want to gather all lines that have that [!...!] in them. I assume this might be similar to the TODO or GTDalt bundles but haven't checked them out yet. Thanks all for any advice and help. I know I've asked a lot here, but even just pointers to where I can find the best examples of implementations of each would really help me out. Thanks, Jeff

19 years, 2 months

2
1
0 0

subversion and colordiff

by Jack Nutting

Hi all, I've been a paid member of the TextMate-o-sphere for a couple months now, but have just started dipping into its mighty goodness. One thing that I've found that is not quite so good is how the subversion plugin won't play nice with colordiff. In my .subversion/config, I've set it up to use colordiff instead of diff. I do a lot of my work from the command-line, so this is pretty important for me. Unfortunately, the subversion plugin doesn't like this. If you look here: http://www.nuthole.com/img/tm_ss1.png you'll see what I'm talking about. The upper half ("Untitled 705") shows the result of me doing a "Diff with Newest (HEAD)" with my preferred .subversion/config settings intact, while the lower half ("Untitled 706") shows the much prettier version that the subversion bundle does all on its own if I remove my settings. Now, I'd just accept that "that's just the way it is", except for the fact that the bundles doesn't *always* do this. In particular, if I bring up an SVN Log from within TextMate, and then click on a link to see a diff in there, the resulting diff is displayed in a TextMate-colorized fashion, apparently ignoring my .subversion/config settings (hooray!). So what I wonder is, if the plugin can ignore my settings and do its own colorization in one case, why can't it do it all the time? -- // jack // http://www.nuthole.com

19 years, 2 months

3
3
0 0

UTF8 on command output problems (ex. perl tidy)

by André Cruz

Hello. I use TextMate 1.5.5. I came across a problem exibited by the perl bundle Tidy command. If the output of a command, in this case perltidy, contains chars in utf8, all the output is discarded and we end up with a blank document. For example this script: ################## my $body = <<END; Reparámos END ############ If I run the tidy command on this file, I end up with a blank document. Perltidy works fine though because I tried redirecting the output of the command to a file and it's all there. Any ideias? Regards, André Cruz

19 years, 2 months

4
5
0 0

Re: [TxMt] Flex 2 Bundle

by Simon Gregory

>Simon: How feasible is it to break this >bundle into two parts? Will that put us ahead or behind of where we >are with the current stand-alone bundles? Very feasible, and the combined bundle is ahead of the two standalones... although there are points where they need to merge/work out which solution is best. >It sounds like most of us on on the same page, here. I think it'd be >nice if we could agree on a single AS3 and a single Flex bundle to >focus our efforts on so we have something to congregate around. >Nominations? Personally I don't mind. I'd be happy to see it broken up on the grounds that the bundle title is far far too long at the moment ;) One thing I'd be concerned about is a possible duplication of build and help commands and their associated TM_BUNDLE_SUPPORT/bin and lib files. But this is coming from a bundle developer perspective and we should focus on the end user so can't be used as a reason not to. Allan - any chance of getting a TextMate icon for .mxml files?

19 years, 2 months

6
10
0 0

Re: PERL - Tidy does not work

by André Cruz

On 2007/05/10, Ciarán Walsh wrote: > does env|sort ⌃R include it? You mean if the env var is set? env will not include it since it is set only for the perltidy command. But just to check the value I ran __CF_USER_TEXT_ENCODING=$UID: 0x8000100:0x8000100 env|sort This is the value set: __CF_USER_TEXT_ENCODING=501:0x8000100:0x8000100 André Cruz

19 years, 2 months

1
0
0 0

Re: PERL - Tidy does not work

by André Cruz

On 2007/05/10, Ciarán Walsh wrote: > • Prepend “__CF_USER_TEXT_ENCODING=$UID:0x8000100:0x8000100 ” before > “perltidy -st…” Nope.. Didn't work. Thanks for the help though, André Cruz

19 years, 2 months

2
1
0 0

Yet another HTML bundle...

by Yann B

I finally cleaned up my HTML bundle, if anyone interested, it's there: http://tinyurl.com/2jjkt3 basic idea is to assign same key shortcut for all phrase, same shortcut for all block, same shortcut for all inline, etc... elements. sorta the way BBEdit used to work (well, it probably still does, just haven't opened in in a looooong time). It also adds tab triggers to basically all tags. Not revolutionary, just a little update to the great built in bundle. It saves me time though, so I'm thinking it might help a couple other people... I even made my first screencast to show you how to use it! enjoy :) - Yann

19 years, 2 months

1
0
0 0

Multiple Tabs

by Brian Armstrong

Xavier, MacFUSE is awesome! Thank you so much! I switched from PC where I loved using WedDrive, and have been looking for something like that for a while now. I'm surprised MacFUSE is not more well know. Thanks a million! Brian

19 years, 2 months

1
0
0 0

New Window with Selection Service?

by Eric Coleman

I believe I read the TextMate Service menu was disabled / being replaced, however, I think having an item thats 'new window with selection' would be great... I seem to use it very often... - Eric

19 years, 2 months

2
1
0 0

Tiny bug in Bundle Editor

by Hans-Joerg Bibiko

Hi, I found a tiny bug (resp. 'evil' pitfall) in the bundle editor. I opened the bundle editor, went to a command 'A' and pressed CTRL +APPLE+E for "Edit in TextMate". OK. Then I looked for a code snippet in an other command 'B' using the bundle editor. I copy&pasted it. Fine. But then I saved my changes. TM wrote my stuff back in that command which was active in the bundle editor (in my case command 'B'!, not 'A' which I actually was editing). Well, TM wrote it back to command 'B' but the bundle editor didn't save it fortunately, and command 'A' was unchanged. The tricky thing only is that all my changes are gone because I also closed my editing window. Would it be possible that TM remembers the command which I actually editing? Regards, Hans

19 years, 2 months

2
1
0 0

WSC TextMate Bundle?

by Cliff Pruitt

Hey everyone, I'm new to the list as of today. I'm writing to ask if anyone out there has (and can make available), or knows of, a WSC bundle for TextMate. WSC's are XML files that Windows uses as a kind of COM object class definition. My employer is pushing to move everything we have in classic ASP over to WSCs and working without a good TextMate bundle or even a language definition is a pain to say the least. If nobody has an existing bundle I'm going to need to make on myself but I'd rather not re-invent the wheel here if someone better than I (which isn't hard to find) has already built the foundation. Any help or pointers in the right direction is much appreciated... - Cliff

19 years, 2 months

2
2
0 0

Additions to CSS bundle?

by Yann B

I just notice a few new additions to the CSS bundle, such as: CodeCompletion CSS CodeCompletion CSS Properties CodeCompletion CSS Property Values Has it been there for a while? I tried using it but nothing happens when I use the shortcuts... How are those meant to be used exactly? Thanks!

19 years, 2 months

2
1
0 0

Open file Browser

by Dan Course

Hi List-o-mate, I've starting writing my own snippets and can use the whole, "${1:insert stuff}" ok now, but I wondered if there was a way to open a File Browser window? eg, my current html img snippet is, <img src="${1:assets/images/${2}}" alt="${3:$2}" /> but it'd be cool to have, <img src="${1:FILE_BROWSER}" alt="${2:alt_text}" /> Thank you, DanC -- danCourse www.dancourse.co.uk 07790 13 83 23 Flash2.0 & PHP Freelancer

19 years, 2 months

2
1
0 0

[LaTex] Problem with Reformat

by spamhalde＠fastmail.fm

Hello, when I type an enumeration I get: \begin{enumerate} \item Geringe Tiefenschärfe. sdfdsfsdfdsfdsfsdfdsf erscheinen sdfsdfsdf Bild war selten. \item dfdfdf dsf sdfsd f sdf \end{enumerate} Is there a possibility to get it this way: \begin{enumerate} \item Geringe Tiefenschärfe. sdfdsfsdfdsfdsfsdfdsf erscheinen sdfsdfsdf Bild war selten. \item dfdfdf dsf sdfsd f sdf \end{enumerate} I believe this is more readable. Second questions: When I press in the eq. Ctrl+Q i get this: \begin{enumerate} \item Geringe Tiefenschärfe. sdfdsfsdfdsfdsfsdfdsf erscheinen sdfsdfsdf Bild war selten. \item dfdfdf dsf sdfsd f sdf \end{enumerate} Surely wrong. The items shouldbe aligned. Is there a way to achieve this? Bye

19 years, 2 months

2
1
0 0

Shortcut for replace in selection

by Pedro Melo

Hi, the most common search & replace I do is "Replace in Selection". I can do everything with the keyboard, including switching RegExp on and off, but I need to use the Alt/option key to switch to In Selection and the mouse to do it. I was wondering, is there anyway to access those buttons with the keyboard? Best regards, -- Pedro Melo Blog: http://www.simplicidade.org/notes/ Jabber ID: melo(a)simplicidade.org Use Jabber!

19 years, 2 months

4
4
0 0

CSS code completion from html file?

by ZulloP

there is any way to get the CSS code completion function to display the IDs or class used in the html file? let's stay I have the following on index.html: <div id="lorem">ipsum dolorem</div> Now, opening style.css file (in same project) and pressing [command] + [escape] buttons, I would like textmate showing up the suggestion "lorem" as the ID is present on index.html file. ...any suggestion? I hope I was clear enough :P many thanks in advance. -- View this message in context: http://www.nabble.com/CSS-code-completion-from-html-file--tf3704144.html#a1… Sent from the textmate users mailing list archive at Nabble.com.

19 years, 2 months

2
3
0 0

Open multiple files in Tabs?

by Brian Armstrong

Does anyone know how to get TextMate to always use tabs for multiple files instead of new windows? Often I open files directly from Transmit and they aren't in their own project, after more than 2 or 3 it becomes cumbersome. Thanks! Brian Armstrong

19 years, 2 months

4
3
0 0

Help with Support Librarys

by Oliver Taylor

If anyone's got the time, I'd love to be walked thru the process of breaking-up several existing commands so they can be included in each other via a support library. The commands are listed here: HTML - http://pastie.textmate.org/59923 Prince export - http://pastie.textmate.org/59927 Prince export (numbered) - http://pastie.textmate.org/59929 Preview - http://pastie.textmate.org/59926 You'll see that they are all variations on the same thing. The steps are as follows: 1. Begin an HTML page 2. Use the "common layout" css 3. A perl command that transforms the document 4. End the HTML page 5. Do something with the HTML file Depending on the command, other small things are added. Mainly, the addition of different print stylesheets for each of the prince commands. I've tried to make it as clear as possible in the code, let me know if you need more direction. I know that each of these code chunks could be broken up and reused in each command (much like php includes) but I have no idea how to do it. Any help is appreciated, and feel free to email me directly.

19 years, 2 months

1
0
0 0

Problem with snippet

by spamhalde＠fastmail.fm

Hello, I want a snippet that inserts $\mu$ behind a number (for example "10$\mu$"). The tab triggers is "mü" So I have to type "10" "blank" "mü" "tab". My snippet is "$$\mu m$$" But this does not word. I do not get the dollar signs. And I do not know how to go back one letter. How can I do that? Bye.

19 years, 2 months

7
7
0 0

Bundles with spaces in the name.

by Luke Daley

Hi, I assume like many others, my "~/Library/Application Support/ TextMate/" directory is a svn repo. I install extra bundles via the svn externals mechanism. This works well except for when the bundle name has a space in it because of this bug: http:// subversion.tigris.org/issues/show_bug.cgi?id=2461 Most annoying. How are others managing this? -- LD.

19 years, 2 months

1
0
0 0

HTML Special Character Bundles

by Chip Cullen

I came up with these the other day, and thought someone else might find these useful. They're very small bundles that simply let you type (while working in HTML) and have properly coded typographic characters. I come from a print design background, and am used to being rather particular with my typography. One of my biggest pet peeves is seeing a double tick mark (") where a proper quote mark (") should be. I've been learning to hand-code my websites, but something that always frustrated me with HTML was having to code out – when I was used to just hitting opt - (hyphen). So I came up with the attached snippets that let me do what I wanted to do - I can type the character as I'm used to typing it, and Textmate inserts the proper HTML code. I'll be honest, I got the idea for this when I tried out SkEdit - it was the one feature that I missed in Textmate. But it was easy enough to add myself. Enjoy! I hope there are some typophiles that will like this!

19 years, 2 months

3
4
0 0

Using Projects on remote servers - the easy way

by Yann B

Sorry if it's old news for some of you guys, but I just found out that using MacFUSE and sshfs makes it super easy to use TextMate projects/tabs with files on remotes servers (as long as you have SSH access). I know the question comes back once in a while on here, and I for one was never really satisfied with the workarounds people suggested... This solution makes it really dead simple to get access to all TextMate Project features... I wrote up a little blog post with the details if someone's interested: http://minimaldesign.net/blog/workflow/remote-textmate-projects Hope it helps :)

19 years, 2 months

4
3
0 0

Re: textmate Digest, Vol 32, Issue 6

by Brian Armstrong

Dan, thank you so much that was exactly what I was looking for! Thanks! Brian On 5/6/07, textmate-request(a)lists.macromates.com <textmate-request(a)lists.macromates.com> wrote: > Send textmate mailing list submissions to > textmate(a)lists.macromates.com > > To subscribe or unsubscribe via the World Wide Web, visit > > http://lists.macromates.com/mailman/listinfo/textmate > or, via email, send a message with subject or body 'help' to > textmate-request(a)lists.macromates.com > > You can reach the person managing the list at > textmate-owner(a)lists.macromates.com > > When replying, please edit your Subject line so it is more specific > than "Re: Contents of textmate digest..." > > Today's Topics: > > 1. Re: Patch for LaTex Bundle (Xavier Cambar) > 2. Re: Patch for LaTex Bundle (Charilaos Skiadas) > 3. Re: periodic key binding freak-out (Grant Hollingworth) > 4. Re: Patch for LaTex Bundle (Xavier Cambar) > 5. Using Projects on remote servers - the easy way (Yann B) > 6. Re: Feature request: "Open Terminal here ..." (Fred B) > 7. question regarding CSS brackets (ZulloP) > 8. Re: The Dvorak-Qwerty layout, 2 years later (Sami Samhuri) > 9. Re: question regarding CSS brackets (Jacob Rus) > 10. Re: question regarding CSS brackets (ZulloP) > 11. Re: question regarding CSS brackets (Jacob Rus) > 12. Re: Using Projects on remote servers - the easy way (Yi Qiang) > 13. Re: Using Projects on remote servers - the easy way (Gerd Knops) > 14. Find in Selection? (Niels Kobsch?tzki) > 15. Scope and Preprocessing for personal Markup (J Fischer) > 16. Reformat php? (Brian Armstrong) > 17. HTML Special Character Bundles (Chip Cullen) > 18. Re: Reformat php? (Dan Lowe) > 19. Re: Reformat php? (Erwan David) > 20. Re: Find in Selection? (Ciar?n Walsh) > 21. Re: Find in Selection? (Jacob Rus) > 22. Re: HTML Special Character Bundles (Jacob Rus) > 23. Re: Re: Find in Selection? (Niels Kobsch?tzki) > 24. Re: Re: HTML Special Character Bundles (Chip Cullen) > 25. Re: question regarding CSS brackets (ZulloP) > > > ---------- Forwarded message ---------- > From: Xavier Cambar <xcambar(a)gmail.com> > To: TextMate users <textmate(a)lists.macromates.com> > Date: Sat, 5 May 2007 17:14:37 +0200 > Subject: Re: [TxMt] Patch for LaTex Bundle > Going on this way, I found out that the command was used to open > files in a separate window. > I am looking for a way to open incuded files in a tab. I thought of a > recursive search, starting from the folder of the master file (if not > defined, the currently opened one), or even better, opening the right > file from the ones in the current project. Anyhow, there are many > ways to make this efficient, but I have no idea how to open a file in > a tab... Commands generally use 'mate', which (as far as I know) > isn't able of this... > > Well, any idea? > Xavier > > Le 4 mai 07 à 21:19, Charilaos Skiadas a écrit : > > > Xavier, > > > > Thanks for the patch, sorry it took me so long to commit it. > > > > Haris Skiadas > > Department of Mathematics and Computer Science > > Hanover College > > > > On Apr 20, 2007, at 12:27 PM, Xavier CAMBAR wrote: > > > >> Context: > >> I needed to insert tex files which filenames contained spaces into > >> my document. LaTex can handle this efficiently if quotes are > >> provided in the \include (like in \include{"bla bla/bla bla"}). > >> > >> For easy moving along my document, I intended to use the "Open > >> Included File" command. But that command doesn't handle the quoted > >> filenames, as the quotes are taken into account as normal characters. > >> So here I am with a line to be added to that command in order to > >> correct that misbehaviour: > >> > >> 10: ... > >> 11: if options.empty? > >> 12: print "Did not find any appropriate item to open in #{ENV > >> ['TM_SELECTED_TEXT'] ? "selection" : "current line" }" > >> 13: else > >> 14: options[0].each{|el| el.gsub!(/(^\")?(\"$)?/, '')} > >> #<-- Here it is! > >> 15: filepath = `kpsewhich #{e_sh options[0]}`.chomp > >> 16: if filepath.empty? > >> 17: ... > >> > >> I don't know how to commit changes in a bundle (according I am > >> allowed to!). So now it's up to you, folks, to add it to the > >> repository. > >> Note that I quickly and unformally tested it, and everything seems > >> ok. > >> > >> Xavier Cambar > > > > > > > ______________________________________________________________________ > > For new threads USE THIS: textmate(a)lists.macromates.com > > (threading gets destroyed and the universe will collapse if you don't) > > http://lists.macromates.com/mailman/listinfo/textmate > > > > > ---------- Forwarded message ---------- > From: Charilaos Skiadas <skiadas(a)hanover.edu> > To: TextMate users <textmate(a)lists.macromates.com> > Date: Sat, 5 May 2007 11:24:53 -0400 > Subject: Re: [TxMt] Patch for LaTex Bundle > > On May 5, 2007, at 11:14 AM, Xavier Cambar wrote: > > > Going on this way, I found out that the command was used to open > > files in a separate window. > > I am looking for a way to open incuded files in a tab. I thought of > > a recursive search, starting from the folder of the master file (if > > not defined, the currently opened one), or even better, opening the > > right file from the ones in the current project. Anyhow, there are > > many ways to make this efficient, but I have no idea how to open a > > file in a tab... Commands generally use 'mate', which (as far as I > > know) isn't able of this... > > For me the command opens files in a new tab, and not in a separate > window. Perhaps the files you are trying to open are not in the > project/folder? > > > Well, any idea? > > Xavier > > Haris Skiadas > Department of Mathematics and Computer Science > Hanover College > > > > > > > > ---------- Forwarded message ---------- > From: Grant Hollingworth <grant(a)antiflux.org> > To: textmate(a)lists.macromates.com > Date: Sat, 5 May 2007 09:49:33 -0600 > Subject: Re: [TxMt] periodic key binding freak-out > * Allan Odgaard <throw-away-1(a)macromates.com> [2007-05-05 02:12]: > >The 0x200000 is the NSNumericPadKeyMask. > > > >Are you using a PC keyboard possibly with some adaptor? Is there a > >num-lock key you can press? If so, try see if just pressing that > >doesn't toggle the behavior. > > I'm using my MacBook Pro's built-in keyboard. Turning on numlock does give > me that modifier, but it changes the key to its inset number pad equivalent: > '*' instead of 'p'. > > Characters: * > Unicode: 42 / 0x2a > Keys: ⇧^* > Key Code: 67 / 0x43 > Modifiers: 2490627 / 0x260103 > > When I was having problems, the key stayed as 'p'. So somehow the mask was > flipped on but without my keyboard layout changing. > > > > ---------- Forwarded message ---------- > From: Xavier Cambar <xcambar(a)gmail.com> > To: TextMate users <textmate(a)lists.macromates.com> > Date: Sat, 5 May 2007 18:29:58 +0200 > Subject: Re: [TxMt] Patch for LaTex Bundle > > Le 5 mai 07 à 17:24, Charilaos Skiadas a écrit : > > For me the command opens files in a new tab, and not in a separate > > window. Perhaps the files you are trying to open are not in the > > project/folder? > > Yes, they are. Even better, whether the files are already opened in a > tab or not doesn't change the result. They keep on (re)opening in a > new window. > Damn... > > Xavier > > > ---------- Forwarded message ---------- > From: Yann B <textmate(a)minimaldesign.net> > To: textmate(a)lists.macromates.com > Date: Sat, 5 May 2007 13:02:10 -0400 > Subject: [TxMt] Using Projects on remote servers - the easy way > Sorry if it's old news for some of you guys, but I just found out > that using MacFUSE and sshfs makes it super easy to use TextMate > projects/tabs with files on remotes servers (as long as you have SSH > access). I know the question comes back once in a while on here, and > I for one was never really satisfied with the workarounds people > suggested... > > This solution makes it really dead simple to get access to all > TextMate Project features... I wrote up a little blog post with the > details if someone's interested: > > http://minimaldesign.net/blog/workflow/remote-textmate-projects > > Hope it helps :) > > > > ---------- Forwarded message ---------- > From: "Fred B" <fredb7(a)gmail.com> > To: "TextMate users" <textmate(a)lists.macromates.com> > Date: Sat, 5 May 2007 19:05:03 +0200 > Subject: Re: [TxMt] Feature request: "Open Terminal here ..." > On 5/4/07, Allan Odgaard <throw-away-1(a)macromates.com> wrote: > > I updated the default command to use your script if either iTerm is > > running or TM_TERMINAL is set to iTerm. > > Thanks Allan. One less custom command to worry about! ;) > Glad you found the script useful. > > -- > FredB > > > > ---------- Forwarded message ---------- > From: ZulloP <info(a)webrevolution.org> > To: textmate(a)lists.macromates.com > Date: Sat, 5 May 2007 14:36:04 -0700 (PDT) > Subject: [TxMt] question regarding CSS brackets > > I noticed Textmate automatically formats the curvy brackets in the following > way: > > #test{} > > any way to modify it like: > > #test { } > > Many thanks in advance. > -- > View this message in context: > http://www.nabble.com/question-regarding-CSS-brackets-tf3697791.html#a10340… > Sent from the textmate users mailing list archive at Nabble.com. > > > > > ---------- Forwarded message ---------- > From: "Sami Samhuri" <sami.samhuri(a)gmail.com> > To: "TextMate users" <textmate(a)lists.macromates.com> > Date: Sat, 5 May 2007 15:34:27 -0700 > Subject: Re: [TxMt] The Dvorak-Qwerty layout, 2 years later > On 5/5/07, Allan Odgaard <throw-away-1(a)macromates.com> wrote: > > As for what Leopard may or may not change, I can't say. > > > > I suspected this would be the case. > > > But there is one new line in a header that has made me add "revisit key > event > > decoding" to the to-do. But don't get your hopes up, it's no simple > > thing, and presently I have no idea if the new route is plausible. > > > Ok thanks for the honest response. It's pretty much what I expected. I'll > just transition to pure Dvorak. > > > -- Sami > > ---------- Forwarded message ---------- > From: Jacob Rus <jacobolus(a)gmail.com> > To: textmate(a)lists.macromates.com > Date: Sat, 05 May 2007 18:52:22 -0400 > Subject: [TxMt] Re: question regarding CSS brackets > ZulloP wrote: > > I noticed Textmate automatically formats the curvy brackets in the > following > > way: > > > > #test{} > > > > any way to modify it like: > > > > #test { } > > You'll have to be a lot more specific. TextMate doesn't "format" curly > braces at all, to my knowledge. It does have a "typing pairs" feature > which will insert a closing `}` when you type `{`. Is this what you are > referring to? > > > > > ---------- Forwarded message ---------- > From: ZulloP <info(a)webrevolution.org> > To: textmate(a)lists.macromates.com > Date: Sat, 5 May 2007 16:02:13 -0700 (PDT) > Subject: Re: [TxMt] question regarding CSS brackets > > Hello Jacob Rus4, yes, I'm talking about the "typing pairs" feature... > sorry! > I would like to have #test{[space][curosor here][space]} > > I'hope is clear enoguh. > > Thanks for your help. > -- > View this message in context: > http://www.nabble.com/question-regarding-CSS-brackets-tf3697791.html#a10341… > Sent from the textmate users mailing list archive at Nabble.com. > > > > > ---------- Forwarded message ---------- > From: Jacob Rus <jacobolus(a)gmail.com> > To: textmate(a)lists.macromates.com > Date: Sat, 05 May 2007 20:42:15 -0400 > Subject: [TxMt] Re: question regarding CSS brackets > ZulloP wrote: > > Hello Jacob Rus, yes, I'm talking about the "typing pairs" feature.... > sorry! > > I would like to have #test{[space][curosor here][space]} > > > > I hope [that] is clear enoguh. > > Okay, what you'll want to do then is to create a [macro][1], which first > types `{`, then types two spaces, then moves one character to the left. > > -Jacob > > [1]: http://macromates.com/textmate/manual/macros#macros > > > > > ---------- Forwarded message ---------- > From: Yi Qiang <yqiang(a)gmail.com> > To: TextMate users <textmate(a)lists.macromates.com> > Date: Sat, 5 May 2007 18:07:39 -0700 > Subject: Re: [TxMt] Using Projects on remote servers - the easy way > > On May 5, 2007, at 10:02 AM, Yann B wrote: > > > Sorry if it's old news for some of you guys, but I just found out > > that using MacFUSE and sshfs makes it super easy to use TextMate > > projects/tabs with files on remotes servers (as long as you have > > SSH access). I know the question comes back once in a while on > > here, and I for one was never really satisfied with the workarounds > > people suggested... > > > > This solution makes it really dead simple to get access to all > > TextMate Project features... I wrote up a little blog post with the > > details if someone's interested: > > > > > http://minimaldesign.net/blog/workflow/remote-textmate-projects > > > > Hope it helps :) > Fantastic write up! I was _very_ surprised at how easy it was to set > up macfuse and sshfuse. > > This is off topic so please reply in private if you wish. > > Is it possible to automount sshfs volumes? > > Cheers, > Yi > > -- > http://www.yiqiang.net > > > > > > ---------- Forwarded message ---------- > From: Gerd Knops <gerti-textmate(a)bitart.com> > To: TextMate users <textmate(a)lists.macromates.com> > Date: Sat, 5 May 2007 22:48:44 -0500 > Subject: Re: [TxMt] Using Projects on remote servers - the easy way > On May 5, 2007, at 8:07 PM, Yi Qiang wrote: > > > > Is it possible to automount sshfs volumes? > > Not sure if it works for sshfs volumes, but a little known feature is > that one can drag a mounted volume into the 'Login Items' TableView > (System Preferences/Accounts/Login Items). Works at least for webdav > volumes. > > Gerd > > > > > ---------- Forwarded message ---------- > From: Niels Kobschätzki <n.kobschaetzki(a)googlemail.com> > To: TextMate users <textmate(a)lists.macromates.com> > Date: Sun, 6 May 2007 07:44:26 +0200 > Subject: [TxMt] Find in Selection? > Hi! > > Is there a way for do a "replace all" only in a selection? I can only > find "Use selection for find" but that puts only the selected text > into the find-part of the find-dialog. > I searched for something like this in TextMate already quite often > and therefore I think other ppl would use it as well but I can't > remember that I've ever read a feature request for this, therefore it > must be somewhere… > > Niels > > > ---------- Forwarded message ---------- > From: "J Fischer" <regisjf(a)gmail.com> > To: textmate(a)lists.macromates.com > Date: Sat, 5 May 2007 22:57:01 -0700 > Subject: [TxMt] Scope and Preprocessing for personal Markup > Hi, > > Within the time constraints, I've done what searching I can through the > docs, wiki, and mailing list archives to get a personal markup bundle > working. Thanks to the clear documentation and a lot of the archived posts > here, I have all the snippets and syntax coloring working. However, there > are a couple of things that I still haven't worked out, which I could use a > little help with. I apologize if they've been covered before and I missed > them. If I had more time, I'd keep searching around for the answers, but > with an upcoming deadline, I just have to get some guidance. > > My bundle is called "jmarkup" and I've set most of the scope selectors to > "text." (BTW, I still don't competely get how to choose scope selectors, > despite reading that section many times.) > > I'll probably do most of my writing in Latex or Markdown (or MMD), and > currently I have to go back and forth between syntax coloring for either > Latex or jmarkup. > > 1) Can I somehow set my scope so that I can see it colored while I'm in > Latex and MMD? > > 2) Could someone point me to a place explaining how I could process my > markup before the latex. E.g. So that when I hit the key combo to preview > the Latex, everything is preprocessed to replace my [[note syntax ]] with > Latex markup for left and right margin notes. > > 3) Referring to #2 above, could I have separate processing-replacements set > up for whether I was making an output for myself (e.g. working draft with > all notes and markup) or for my advisor (e.g. print draft without notes and > hiding my in-line styles, like "revise" or "check facts")? > > 4) What would the best bundle be to use as an example of how to gather all > "action" markups in to a separate document? For example, I might have a fact > that is suffixed with [!check this!] and I want to gather all lines that > have that [!...!] in them. I assume this might be similar to the TODO or > GTDalt bundles but haven't checked them out yet. > > > Thanks all for any advice and help. I know I've asked a lot here, but even > just pointers to where I can find the best examples of implementations of > each would really help me out. > > Thanks, > > Jeff > > ---------- Forwarded message ---------- > From: "Brian Armstrong" <barmstrong(a)gmail.com> > To: textmate(a)lists.macromates.com > Date: Sun, 6 May 2007 01:22:19 -0500 > Subject: [TxMt] Reformat php? > Hi All, > > I'm new to Textmate, and I have to say I am most impressed! What a > beautiful piece of software. I downloaded the 30 day trial, and I am > having problems with one thing: reformatting php code. > > Let's say I had a piece of code like this: > > // make sure it doesn't crash in an ugly way > if (!function_exists('foo')) > { > die("this function required"); > } > > and I run the reformat on it, or ^Q, then I get this: > > // make sure it doesn't crash in an ugly way if > (!function_exists('foo')) { die("this function required"); } > > Not very helpful, and you notice that the 'if' is now on a comment line! > > Note that this performs the same whether I have the file showing as > HTML or PHP. Given the amount of work that's gone into PHP capability > overall (great completion for example) I'm shocked that this is > standard behavior out of the box. > > Would love to get some tips from the textmate masters on here. Thank you! > Brian Armstrong > > > > ---------- Forwarded message ---------- > From: "Chip Cullen" <chip.cullen(a)gmail.com> > To: textmate(a)lists.macromates.com > Date: Sun, 6 May 2007 16:07:10 +0900 > Subject: [TxMt] HTML Special Character Bundles > I came up with these the other day, and thought someone else might > find these useful. They're very small bundles that simply let you type > (while working in HTML) and have properly coded typographic > characters. > > I come from a print design background, and am used to being rather > particular with my typography. One of my biggest pet peeves is seeing > a double tick mark (") where a proper quote mark (") should be. > > I've been learning to hand-code my websites, but something that always > frustrated me with HTML was having to code out – when I was used > to just hitting opt - (hyphen). > > So I came up with the attached snippets that let me do what I wanted > to do - I can type the character as I'm used to typing it, and > Textmate inserts the proper HTML code. > > I'll be honest, I got the idea for this when I tried out SkEdit - it > was the one feature that I missed in Textmate. But it was easy enough > to add myself. > > Enjoy! I hope there are some typophiles that will like this! > > > ---------- Forwarded message ---------- > From: Dan Lowe <dan(a)tangledhelix.com> > To: TextMate users <textmate(a)lists.macromates.com> > Date: Sun, 6 May 2007 03:47:37 -0400 > Subject: Re: [TxMt] Reformat php? > > On May 6, 2007, at 2:22 AM, Brian Armstrong wrote: > > > and I run the reformat on it, or ^Q, then I get this: > > > > // make sure it doesn't crash in an ugly way if > > (!function_exists('foo')) { die("this function required"); } > > > > Not very helpful, and you notice that the 'if' is now on a comment > > line! > > ^Q is a paragraph reformat, which as you have found is not so great > for code. I believe what you are looking for is a way to (re-)indent > code, in which case you want this: > > Text -> Indent Selection ( cmd-opt-[ ) > > Note that you need to have a selection active for this to be > available. Otherwise it will act on the current line only. > > -dan > > > > > > ---------- Forwarded message ---------- > From: Erwan David <erwan(a)rail.eu.org> > To: textmate(a)lists.macromates.com > Date: Sun, 6 May 2007 10:05:23 +0200 > Subject: Re: [TxMt] Reformat php? > Le Sun 6/05/2007, Dan Lowe disait > > > > On May 6, 2007, at 2:22 AM, Brian Armstrong wrote: > > > > > and I run the reformat on it, or ^Q, then I get this: > > > > > > // make sure it doesn't crash in an ugly way if > > > (!function_exists('foo')) { die("this function required"); } > > > > > > Not very helpful, and you notice that the 'if' is now on a comment line! > > > > ^Q is a paragraph reformat, which as you have found is not so great for > > code. I believe what you are looking for is a way to (re-)indent code, in > > which case you want this: > > > > Text -> Indent Selection ( cmd-opt-[ ) > > > > Note that you need to have a selection active for this to be available. > > Otherwise it will act on the current line only. > > Is there a way to rebind this ? On a french keyboard, [ is Shift-opt-5 thus > a > problem to get opt-[ > > > > > -- > Erwan > > > > ---------- Forwarded message ---------- > From: Ciarán Walsh <ciawal(a)gmail.com> > To: TextMate users <textmate(a)lists.macromates.com> > Date: Sun, 6 May 2007 09:50:05 +0100 > Subject: Re: [TxMt] Find in Selection? > On 6 May 2007, at 06:44, Niels Kobschätzki wrote: > > > Hi! > > > > Is there a way for do a "replace all" only in a selection? I can > > only find "Use selection for find" but that puts only the selected > > text into the find-part of the find-dialog. > > I searched for something like this in TextMate already quite often > > and therefore I think other ppl would use it as well but I can't > > remember that I've ever read a feature request for this, therefore > > it must be somewhere… > Hold shift when doing the replace (either ⌃⌘⇧F or when clicking > the replace button) > > > > > ---------- Forwarded message ---------- > From: Jacob Rus <jacobolus(a)gmail.com> > To: textmate(a)lists.macromates.com > Date: Sun, 06 May 2007 04:51:29 -0400 > Subject: [TxMt] Re: Find in Selection? > Niels Kobschätzki wrote: > > Is there a way for do a "replace all" only in a selection? I can only > > find "Use selection for find" but that puts only the selected text into > > the find-part of the find-dialog. > > I searched for something like this in TextMate already quite often and > > therefore I think other ppl would use it as well but I can't remember > > that I've ever read a feature request for this, therefore it must be > > somewhere… > > In the find dialog, try pressing the ⌥ (opt) key. > > -Jacob > > > > > ---------- Forwarded message ---------- > From: Jacob Rus <jacobolus(a)gmail.com> > To: textmate(a)lists.macromates.com > Date: Sun, 06 May 2007 04:59:59 -0400 > Subject: [TxMt] Re: HTML Special Character Bundles > Chip Cullen wrote: > > I came up with these the other day, and thought someone else might > > Have you tried smarty pants (or TM's markdown bundle which also runs > smarty pants?) > > -Jacob > > > > > ---------- Forwarded message ---------- > From: Niels Kobschätzki <n.kobschaetzki(a)googlemail.com> > To: TextMate users <textmate(a)lists.macromates.com> > Date: Sun, 6 May 2007 11:01:49 +0200 > Subject: Re: [TxMt] Re: Find in Selection? > On May 6, 2007, at 10:51 AM, Jacob Rus wrote: > > > Niels Kobschätzki wrote: > >> Is there a way for do a "replace all" only in a selection? I can > >> only find "Use selection for find" but that puts only the selected > >> text into the find-part of the find-dialog. > >> I searched for something like this in TextMate already quite often > >> and therefore I think other ppl would use it as well but I can't > >> remember that I've ever read a feature request for this, therefore > >> it must be somewhere… > > > > In the find dialog, try pressing the ⌥ (opt) key. > > Thx a lot (also for the thing with shift from Ciarán) > > Niels > > > ---------- Forwarded message ---------- > From: "Chip Cullen" <chip.cullen(a)gmail.com> > To: "TextMate users" <textmate(a)lists.macromates.com> > Date: Sun, 6 May 2007 18:24:08 +0900 > Subject: Re: [TxMt] Re: HTML Special Character Bundles > In a word, no. I had filtered out the markdown bundle, so I hadn't > explored it. Besides, smartypants doesn't do exactly what I wanted to > do, anyway, as I understand it. It takes "period period period" and > turns it into "…" > > I was trying to have the effect of just typing from within an HTML > document, using the typing that I am used to, and having TM > automagically insert the right HTML code for that typographic mark. > > If Smarty Pants does this as well, I didn't see it. But thanks for > pointing it out - I had no idea! > > On 5/6/07, Jacob Rus <jacobolus(a)gmail.com> wrote: > > Chip Cullen wrote: > > > I came up with these the other day, and thought someone else might > > > > Have you tried smarty pants (or TM's markdown bundle which also runs > > smarty pants?) > > > > -Jacob > > > > > > > ______________________________________________________________________ > > For new threads USE THIS: textmate(a)lists.macromates.com > > (threading gets destroyed and the universe will collapse if you don't) > > http://lists.macromates.com/mailman/listinfo/textmate > > > > > > ---------- Forwarded message ---------- > From: ZulloP <info(a)webrevolution.org> > To: textmate(a)lists.macromates.com > Date: Sun, 6 May 2007 03:18:54 -0700 (PDT) > Subject: Re: [TxMt] question regarding CSS brackets > > Many thanks for your help Jacob. > -- > View this message in context: > http://www.nabble.com/question-regarding-CSS-brackets-tf3697791.html#a10344… > Sent from the textmate users mailing list archive at Nabble.com. > > > > _______________________________________________ > textmate mailing list > textmate(a)lists.macromates.com > http://lists.macromates.com/mailman/listinfo/textmate > >

19 years, 2 months

2
1
0 0

Reformat php?

by Brian Armstrong

Hi All, I'm new to Textmate, and I have to say I am most impressed! What a beautiful piece of software. I downloaded the 30 day trial, and I am having problems with one thing: reformatting php code. Let's say I had a piece of code like this: // make sure it doesn't crash in an ugly way if (!function_exists('foo')) { die("this function required"); } and I run the reformat on it, or ^Q, then I get this: // make sure it doesn't crash in an ugly way if (!function_exists('foo')) { die("this function required"); } Not very helpful, and you notice that the 'if' is now on a comment line! Note that this performs the same whether I have the file showing as HTML or PHP. Given the amount of work that's gone into PHP capability overall (great completion for example) I'm shocked that this is standard behavior out of the box. Would love to get some tips from the textmate masters on here. Thank you! Brian Armstrong

19 years, 2 months

4
4
0 0

question regarding CSS brackets

by ZulloP

I noticed Textmate automatically formats the curvy brackets in the following way: #test{} any way to modify it like: #test { } Many thanks in advance. -- View this message in context: http://www.nabble.com/question-regarding-CSS-brackets-tf3697791.html#a10340… Sent from the textmate users mailing list archive at Nabble.com.

19 years, 2 months

3
5
0 0

Find in Selection?

by Niels Kobschätzki

Hi! Is there a way for do a "replace all" only in a selection? I can only find "Use selection for find" but that puts only the selected text into the find-part of the find-dialog. I searched for something like this in TextMate already quite often and therefore I think other ppl would use it as well but I can't remember that I've ever read a feature request for this, therefore it must be somewhere… Niels

19 years, 2 months

3
3
0 0

The Dvorak-Qwerty layout, 2 years later

by Sami Samhuri

Hello Allan & other TM friends, I'm one of the disturbed folks who tries to make life difficult for myself and those around me by using the Dvorak-Qwerty layout. Apple was kind enough to create this monster, but not kind enough to provide the adequate means for developers to fully support it in their apps[1]. Is there anything in the works to handle the DQ layout properly in TM2? I'm debating a switch to a pure Dvorak[2] layout and since TM is the app I type into for hours daily it has the largest influence on my decision. I know it's foolish to think that maybe Leopard will include some new key handling abilities just for us DQ guys, but I'm clinging to a shred of hope. The only reason I'm bringing this up is that every now and then a new bundle shortcut will catch me by surprise, ie. Cmd-Opt-/ (which is Cmd-Opt-[ in DQ) for commenting blocks overwrote the shortcut for re-indenting a block or line. Cmd-/ works as it should, but for some reason Cmd-Opt-/ uses the Dvorak / instead of the Qwerty /. Some default shortcuts don't work at all (show scope). It's not that big of a deal and I accept that this is the price I pay for choosing an obscure layout. However, my dislike of surprises while coding[3] outweighs the benefits of using DQ in the first place; hence this message. [1] http://comox.textdrive.com/pipermail/textmate/2005-August/005238.html [2] Oh how I would/will miss the cut, copy & paste shortcuts. They suck on a Dvorak layout. [3] I know, I know. Why the hell do I use the cutting edge build of TM if I don't want surprises? ;-) -- Sami Samhuri http://sami.samhuri.net

19 years, 2 months

2
2
0 0

Feature request: "Open Terminal here ..."

by Bonhôte André

Hi Just found something I really miss in TM. Maybe I just didn't find it yet, although it's implemented ;-) Having a project with several subfolders, it would be nice to just right click (or hit a key) to open a terminal window at the current file's location. Is that possible somehow? I have seen "Open "..." with finder.app" and stuff, but no terminal.app. TIA André

19 years, 2 months

8
11
0 0

Patch for LaTex Bundle

by Xavier CAMBAR

Context: I needed to insert tex files which filenames contained spaces into my document. LaTex can handle this efficiently if quotes are provided in the \include (like in \include{"bla bla/bla bla"}). For easy moving along my document, I intended to use the "Open Included File" command. But that command doesn't handle the quoted filenames, as the quotes are taken into account as normal characters. So here I am with a line to be added to that command in order to correct that misbehaviour: 10: ... 11: if options.empty? 12: print "Did not find any appropriate item to open in #{ENV ['TM_SELECTED_TEXT'] ? "selection" : "current line" }" 13: else 14: options[0].each{|el| el.gsub!(/(^\")?(\"$)?/, '')} #<-- Here it is! 15: filepath = `kpsewhich #{e_sh options[0]}`.chomp 16: if filepath.empty? 17: ... I don't know how to commit changes in a bundle (according I am allowed to!). So now it's up to you, folks, to add it to the repository. Note that I quickly and unformally tested it, and everything seems ok. Xavier Cambar

19 years, 2 months

3
4
0 0

periodic key binding freak-out

by Grant Hollingworth

Every so often, TextMate stops handling key bindings for bundle items. Built-in commands still work as expected. When I check ⌃⇧P in Select Bundle Item, it shows ⌃⇧<some roundrect symbol>. The behaviour persists even when I restart TextMate. Logging out seems to fix it. Sometimes it fixes itself. I haven't found anything in console.log. It just happened to me again. This time I used Key Codes[1] to check what TextMate was getting. Key Down Characters: Unicode: 16 / 0x10 Keys: ⇧^P Key Code: 35 / 0x23 Modifiers: 2490371 / 0x260003 Terminal saw the modifier as 0x260103. Later, TextMate started showing 0x260103, too, but the command still didn't work. Finally -- and I have no idea what changed -- things started working again, and I now have a modifier of 0x60103 in all apps. [1] http://www.petermaurer.de/nasi.php?thema=keycodes&sprache=english

19 years, 2 months

3
3
0 0

Re: [TxMt] Detecting Applications

by Allan Odgaard

On 4. May 2007, at 15:56, Simon Gregory wrote: >> if find_app >/dev/null «bundle identifier of iTerm»; then >> echo 'We got iTerm installed!' >> fi > > I'm assuming that the «bundle identifier of iTerm» is the value > from this key found in iTerm.app/Contents/Info.plist > > <key>CFBundleIdentifier</key> > <string>iTerm</string> Yes, unfortunately that bundle identifier is in the wrong format. It should be something like: “com.«company».iTerm”. It will likely work though. Alternatively you can do: find_app iTerm.app (then it looks using the app name instead of the bundle identifier, normally the former would be more ambiguous). > One thing, would iTerm need to have been run once in order for the > system to register it's presence? If it is in /Applications and possibly ~/Applications, the system will automatically register the application (at boot time) -- maybe some other locations are also magic. But at least running the app, will ensure the system has it in the index.

19 years, 2 months

1
0
0 0

Feature request: Find in project - filter by file type

by Sven Axelsson

Maybe I'm just missing something here, but: Please make it possible to use a filter for the files scanned using Find in project. I almost always have a situation where I'm searching for something in my HTML files only and that something will be present in almost all of the PHP files, thus adding a lot of noise to the search result dialog. There will also be situations where I'm searching for instance all index.php files in a large project. And while I'm at it, please make the Find in project faster ;^) -- Sven Axelsson

19 years, 2 months

2
1
0 0

Feature Request: Find in Project - with multiple lines!

by Chip Cullen

I love the "Find in Project" command - especially when I'm working on lots of HTML files. But it lacks something that the regular "Find" command has - the ability to see multiple lines in both the "Find" and "Replace" field. If the "FInd in Project" had that feature, it would be much, much more useful. I work mainly in HTML, and it would really help with things like updating menus across the site - pieces of code that are rarely on a single line. I know that you CAN replace multiple lines of code with "FInd in Project", but having the ability to *see* them would help immensely. For some reason whenever I try to replace multiple lines of code, I get weird duplicates and other strange things. Granted, that could be more indicative of my own ability ; ) - but if I could see all the code at once that I'm using, I think I would run into fewer problems. Any thoughts?

19 years, 2 months

2
1
0 0

Feature Request: Dragged folder hide file types

by Christian Burk

Hi, A nice feature in TextMate is the automatic update of a dragged folder inside the project drawer. But when you work with latex projects and compile your document you'll get some help files, such as aux, toc, lof, lot and so on. For this reason it would be nice to have some kind of filter which is applicable for hiding certain extensions when the folder is rescanned. Would this be possible...? Christian

19 years, 2 months

2
1
0 0

Appearance of HTML Output "isBusy" indicator?

by Steve King

Is there some way to control the appearance of the spinning progress indicator on the HTML output pages? Some CSS, maybe? I'm writing a command using the standard themes given by webpreview.rb, but the spinner is practically invisible. I don't want to turn it off (I know about TextMate.isBusy) or make any drastic changes, just change the color. -- Steve King, <steve(a)narbat.com>

19 years, 2 months

2
1
0 0

Latex completion not working

by Andres Gonzalez-Mancera

Hi all, I'm a Textmate newcomer. I'm using it to write my dissertation in Latex. I ditched TexShop and I really love Textmate. I've watched the video tutorial, read the documentation and have everything setup and working. I have a master file and the compilation works flawlessly. The one thing I haven't been able to use is the \ref{} and \cite{} completion. I have a bib file linked to the master file and my bibliography shows fine when I compile the document. I just can't get completion to work. Same thing with \ref{}, I added colon (:) to the set of word characters but nothing. When I'm in a \ref{} or \cite{} and press escape, nothing happens, I press option-escape and nothing happens. Type the first few letters and press escape, nothing. If I'm outside of \ref{} or \cite{} and type eq: and then escape I DO get completion to work but not if I'm inside of the {}!!!! If I'm anywhere outside an {} and press option-escape I get: Label based on current word.. 1 Citation based on current work... 2 but if I choose either I get a crosshair pointer, what is this for? I'm running Textmate version 1.5.4 (1360) and both the Lattex bundle and support folder are the latest from SVN. Mac os X 10.4.8. Thanks for your help, Andres -- Andres Gonzalez-Mancera Biofluid Mechanics Lab Department of Mechanical Engineering University of Maryland, Baltimore County andres.gonzalez(a)umbc.edu 410-455-3347

19 years, 2 months

3
3
0 0

LaTeX bundle and the exam package

by David F. Snyder

Hi I am hoping someone has solved this problem. I use latekmk.pl script as $TM_TEX_COMPILER to compile my LaTeX documents from within Textmate and it works wonderfully on every document I've made, except for any document that uses the exam package. The problem is small: I must execute cmd-R twice to get it to compile the number of points correctly. This is only a problem within Textmate; if I run the script from the command line it works perfectly. And while it is a small problem it is vexing, since latexmk.pl was made specifically to deal with the need to run LaTeX etc. multiple times. My guess is that there is a bug in either cmd-R (though I can't find one) or somewhere in the bowels of Textmate. Seeing as how I used this package frequently, almost daily, I'm guessing that this need to cmd-R twice will cost me about an hour and a half of my life in the coming year. Best wishes ---- David

19 years, 2 months

3
4
0 0

Feature request: More Show Invisibles options

by Sven Axelsson

Maybe this is already in the works, but anyways: Show invisibles needs a (separate) option to show spaces. Even better, I'd like to see an option to show leading spaces only (Komodo has this). Makes it easier to see the correct indent level. -- Sven Axelsson

19 years, 2 months

1
0
0 0

The tab bar

by Nigel Green

Hi there, Sorry to raise an old question, but I can't find a definitive answer in the archive - is it possible to turn off the tab bar? In a previous post (Re: [TxMt] new beta, in Dec, 2004) Allan said, in a rersponse to a question about hiding the tab/status bars: > > Why remove the option to show/hide tab/status-bar ? > > I didn't thought anyone would actually use them, and if possible, I'd > like to enforce that they're always enabled (since I'll rely more on > these elements in the future). > > I can bring back the option to hide the tab bar. Did this ever get brought back in? Is it a 'hidden' preference that can be accessed? I never use the tab bar and would like to be able to toggle it off if I can. Thanks, Nigel

19 years, 2 months

3
4
0 0

Feature Request: Open images with...

by Christian Burk

Hi Folks, A lot of my projects include some images and for getting a nice overview, I also arrange these images, together with other related files, within the project drawer. If I right click on an image, I can open it with the standard application (for example preview.app). Would it not be nice to have an option "Open with..." and then be able to open it in the favorite graphics program? I know, it is possible to drag and drop the image on the dock icon of the graphics program, but an option would easier. Thanks Christian

19 years, 2 months

2
1
0 0

Detecting Applications

by Simon Gregory

I have a command that relies entirely on the applescriptability of iTerm over Terminal. However as I can't guarantee that iTerm is installed I'm looking for a way to detect it. Does anyone have any suggestions, specifically when it's not running? Thanks, Simon

19 years, 2 months

2
1
0 0

Feature Request: Highlighting folders/files

by Christian Burk

Hello, When I work with large projects and using the project drawer it would be very comfortable and more usable if the folders and files could be highlighted in some way. I mean exactly the same feature that ships with OS X. When you right click on a folder/file you can choose a colour (red, orange, green...) for this item. Thanks Christian

19 years, 2 months

2
2
0 0

Re: [TxMt] Spell checking using Google

by Andy Herbert

> Hi, > > I found a tiny error. Here the corrected utf-8 version of gspell. > > BTW In addition to that it is very easy to write out all google > suggestions delimited by a '|' within the multiple word spell > checking. With the help of a small command which shows this list as > pull-menu you can edit each error very handy ;) > > Cheers, > > Hans Thanks Hans, before reading your recent replies with the attached files, I had already started work on UTF-8 version with environment variable support (I receive the list in digest form, so I'm not always up to date with the activity here.) I'm not quite sure if my contribution is any better or worse than yours because I essentially cannibalised the HTML bundle for encoding and decoding UTF-8 for POST- ing and GET-ting with Google's servers. As a result my effort relies on entities.txt existing in the Support directory in the Textmate bundle (this means that I can no longer supply it as a singular tmCommand), I genuinely do not know if this is a better method for handling this sort of thing - perhaps someone on this list could help clarify. Incidentally, I think there was an error in the original version which was inherited by the version you've supplied - the final tab stop was not being preserved, to correct this remove the line 'text += "$0"' and replace 'print $text' with 'print "#{$text}$0"'. [The GSpell bundle is available here][1] [1]: http://homepage.mac.com/andy.herbert/.Public/GSpell.tmbundle.zip

19 years, 2 months

5
10
0 0

TextMate Apple + Enter doesn't work

by Rabbit

Hey all. I just downloaded version 1.5.5 (1368) on OS 10.4.9. 1. Apple + Enter no longer moves the cursor down one line. 2. The ERB tag creator no longer works (I believe it was CTRL + Z) Any ideas?

19 years, 2 months

3
3
0 0

PerlTidy on TM 1.5.5 (1383)

by David Watson

Hi Folks: I just installed TM 1.5.5 (1383). I have perltidy installed in /usr/bin: ls -lr /usr/bin/perltidy -r-xr-xr-x 1 root wheel 97203 May 3 13:46 /usr/bin/perltidy When I execute tidy from the perl bundle in TM, I get: Couldn't find perltidy Perltidy is available from here. Locations searched: /Applications/TextMate.app/Contents/SharedSupport/Support/bin/CocoaDialo g.app/Contents/MacOS /bin /sbin /usr/bin /usr/sbin /Applications/TextMate.app/Contents/SharedSupport/Support/bin I'm not sure why TM doesn't see perltidy in /usr/bin. Does anyone know how to fix this? Thanks, David

19 years, 2 months

2
1
0 0

Floating Drawer

by Xavier Cambar

Hi, I'm used to TextMate with Full-screen, which is offered by SIMBL, but when in full-screen, the drawer disappears for the screen. In fact, it is still there, but moved to the other ede of the other screen (yes, i have dual-screen). To fix it, I've installed the Plugin from Hetima "The Missing Drawer" which basically includes the drawer into the main panel. But it is realy not convenient when the drawer is not needed, cause I haven't found how to make it disappear... Whatever, this led me to a feature request: a floating drawer. Is there a way to have one? Even better, has anyone already built a plugin or something for that purpose? What do you think of it? A floating drawer, accessible via a shortcut, controlled and navigated from the keyboard, would you take benefit of this feature? Xavier Cambar

19 years, 2 months

5
7
0 0

mate error

by Brett Terpstra

I just noticed I get this from the command line on both individual file and directories. 2007-04-30 19:52:04.221 mate[5199] An uncaught exception was raised 2007-04-30 19:52:04.221 mate[5199] [NOTE: this exception originated in the server.] *** Object does not implement or has different method signature 2007-04-30 19:52:04.221 mate[5199] *** Uncaught exception: <NSInvalidArgumentException> [NOTE: this exception originated in the server.] *** Object does not implement or has different method signature Trace/BPT trap I just upgraded this morning. Not sure what I've done here... Thanks, Brett

19 years, 2 months

7
18
0 0

Re: Code Completion Help

by Oliver Taylor

>> I've got the completion set-up to complete from a document-parser >> and a preference item. The parsed completions still work, but it's >> stopped pulling completions from the preference item. I've checked >> the item name in the bundle editor and the finder, and even tried >> re-creating the completions from scratch, to no avail. > > It works while it's still lowercase, once it goes upcase it doesn't > work anymore. > > thomas Aylott — subtleGradient — CrazyEgg — sixteenColors Yes, you need to be matching lowercase letters. But sometimes the match fails anyway. I just tested again and it seems to be working. This is the worst kind of bug, one that pops up randomly. I'll try to nail it down more specifically and get back to you.

19 years, 2 months

1
0
0 0

Improvements to Objective-C Bundle

by Nithin Reddy

Hello, I made some simple additions to the Objective-C Bundle, and was wondering if anyone was interested in them. * Comment Reflow - based on the Screencast by Allan * Comment Code - comments out the current line of code (or the selected lines of code), useful for debugging * Uncomment code - undoes above I know they are not very glamarous, but I was surprised they were not already included in the bundle. - Nithin

19 years, 2 months

3
4
0 0

Code Completion Help

by Oliver Taylor

I'm having a problem with Code Completion. Here's the deal: I've got the completion set-up to complete from a document-parser and a preference item. The parsed completions still work, but it's stopped pulling completions from the preference item. I've checked the item name in the bundle editor and the finder, and even tried re- creating the completions from scratch, to no avail. Deleting the bundle and reinstalling it seems to fix the problem, but only for a while. I've tried to track down what triggers its failure, but I can't seem to isolate it. Download: http://ollieman.net/files/beta.zip If you could, install the beta and in Screenplay Mode type the following: int. location - d And attempt to trigger the "Time of Day" auto-complete from the "D" at the end of the line. Any help is appreciated. -- Oliver Taylor

19 years, 2 months

2
1
0 0

Re: [TxMt] Re: mate error

by Robert Ullrey

I am getting the same problem when asking mate to open a file. If I use only "mate," TextMate opens. If I use "mate ~/Sites/file.html" TextMate comes to the front window, but the terminal gives the same "***Uncaught Exception" noted earlier. Running on an intel Macbook Pro 10.4.9 Robert On Wednesday, May 02, 2007, at 02:48PM, "Andrew Jaffe" <a.h.jaffe(a)gmail.com> wrote: >Allan Odgaard wrote: >> On 2. May 2007, at 23:23, Brett Terpstra wrote: >> >>> This is from mate.crash.log, sorry for the long paste: >> >> The crash log basically says ?the system function to send a message from >> mate to TextMate crashed? -- so this says less than the Terminal output. >> >> But maybe there is some output (from TextMate) in the system console -- >> the first message you quoted said the error happened in the server >> (TextMate), so if that is the case, details would likely have to be >> found in hte console. >> >Alas, it just appears to say "mate crashed" and "crash report written >to: /Users/jaffe/Library/Logs/CrashReporter/mate.crash.log" > >It seems to be happening with any use of 'mate'... > >Andrew > > > > > > >______________________________________________________________________ >For new threads USE THIS: textmate(a)lists.macromates.com >(threading gets destroyed and the universe will collapse if you don't) >http://lists.macromates.com/mailman/listinfo/textmate > >

19 years, 2 months

2
1
0 0

Markdown bundle request

by Rob McBroom

Could the Markdown bundle be modified to use a TM_MARKDOWN variable (similar to the way the Subversion bundle uses TM_SVN) in the "Convert document/selection to HTML" and other relevant commands? I envision that the variable would contain whatever command(s) you want to use for Markdown stuff and would default to the current "Markdown.pl|SmartyPants.pl|perl…". For example, I like to add the "--html4tags" option and get rid of SmartyPants, but to do it currently, you need to modify the bundle. (Which is fine in theory, but I worry that in practice, updates will be missed.) Or perhaps the "--html4tags" option should just be used/not used automatically based on the value of TM_XHTML. The current chunk of perl would probably be awkward to store in a variable or to use as a default value, but perhaps it could be made into a script in the Markdown bundle's support dir? Just an idea. Thanks. --- Rob McBroom <http://www.skurfer.com/> I didn't "switch" to Apple... my OS did.

19 years, 2 months

2
3
0 0

C++ bundle: symbol detection bug

by Antoine Beyeler

Hi All, I've run into a glitch related to the C++ bundle of TextMate and since I'm new to both TextMate and this list, I'm quite unsure how to proceed with the bug report. Here it is anyway. The symbol is not properly detected with constructor in the form of: Foo::Foo() : boo(1) { } "boo" is incorrectly detected as symbol instead of "Foo::Foo". My bundle collection is quite up-to-date (rev. 7108). Let me know if I should report this elsewhere. Best, Antoine -- Antoine Beyeler PhD Student Ecole Polytechnique Fédérale de Lausanne Laboratory of Intelligent Systems EPFL-STI-I2S-LIS Office ELE 132 - Station 11 CH-1015 Lausanne Voice: ++41 21 693 73 54 Fax: ++41 21 693 58 59 Home page: http://lis.epfl.ch/119413 Project page: http://lis.epfl.ch/microflyers

19 years, 2 months

2
1
0 0

TM's preference "word characters" question

by Hans-Jörg Bibiko

Hi, I have a question about TM's preference "word characters": I also want to match a word if the word contains '\ ' Is this possible? If I write into TM's preference "word characters" '_/\ ' it works partly because TM takes all four characters, but I only want to match '_' '/' '\ ' Any comments are helpful. Thanks in advance. Hans

19 years, 2 months

2
1
0 0

Re: [TxMt] "Save As" Renaming Bug - any hope for the future?

by Juan Falgueras

I think TM do the things fine, as it simple and powerful renaming files in the file drawer. That function has been for me really a time-saver and is very natural that it was there as is. The solution to the problem, IMHO, is to add a more complete behaviour to TM, allowing Option-Drag of files in the drawer. Also, perhaps, info for files (to make them executable, for example, via a dialog... although I think this is not so important...)

19 years, 2 months

2
1
0 0

Subversion Bundle Oddities

by digilord＠mac.com

This morning I downloaded version 1.5.5 (1138). I use TextMate with Subversion every day. Today when I executed CTRL-SHIFT-A to do a check in this got pasted into my document: John Doe 12345 Main Street Plainville Any State 67890 USA I searched through the bundles and did not see a bundle that used that key sequence. I did notice that when I type that sequence the Edit menu item at the top of the screen flashes briefly. Can anyone shed any light on what might be causing this? Thank you! DigiLord

19 years, 2 months

2
2
0 0

Macro finding in project...

by Juan Falgueras

Hi a newbie question, I think... it was very easy :) to make a macro for quickfind the current word (bind this to a Cmd-Opt-Shift-Left/Right arrows make move around the source code really a charm).. but it has been a recurrent temptation for me to wide the finding to the rest of the files in the project. As I use the Cmd-Shift-F dialog I find it really more and more clever (I used to miss the word boundaries check box.. but is ok as it is if you know a little of regexps, of course, as it must be ;) The problem is it was for me impossible to make the macro follow the Find in project the current word... I suppose the problem exceeds the way TM makes the project finding. TM establish a panel where you see each line with the word highlighted (really clever) but it has no way to jump to the word without the dialog... is it?

19 years, 2 months

2
1
0 0

Subversion Bundle Bug

by Andrew Ryan

I can only remove one missing item from the subversion status window. I if I try to remove another, it fails. Steps: 1. Check the status on a folder. 2. A remove button appears next to files that are missing. Click the remove button for a missing file. 3. Confirm the removal. 4. Try to remove another missing file. 5. Wait. Nothing happens. The black loading gear just spins indefinitely in the top right hand corner. Andrew

19 years, 2 months

1
0
0 0

Ruby on Rails Bundle Highlighting: object.include

by Andrew Ryan

The highlighting for the RoR bundle is wrong if an instance method is named include: object.include highlights include as if it were an include at the top of the page. It should recognize it as an instance method and leave it the normal color.

19 years, 2 months

1
0
0 0

Change colors for diff output

by Chuck Esterbrook

TextMate colors the output of a diff (such as "svn di") which is great, but I would like to change the colors. For example, I would prefer that deleted lines are red on white instead of white on red (I find the background color distracting). I didn't see an entry in the TextMate Preferences for these. Am I just missing it? Or can I change these via the defaults database or a plist? Thanks, -Chuck

19 years, 2 months

4
3
0 0

"Save As" Renaming Bug - any hope for the future?

by Chip Cullen

I have been running into a problem with Textmate that for me, anyway, is a major hurdle. When I'm editing an HTML document, and I'm using Textmate's project drawer, I often want to use the open document as a basis for other documents. I go to "Save As..." and name the file, and hit enter. In almost every other Mac OS X program that I know, that command simply creates a new document with the old document as the starting point. However, with Textmate's project drawer, the old file has essentially been renamed by the new one. I have to go back and re-add the old file to have it show up in the Project drawer again. I have searched the archives of the Textmate list, and one other person has mentioned it - about a year ago. Some of the suggestions included hiding the program and bringing it back, re-booting the program, hiding the drawer - nothing works at all for me. I can't even drag the old files form the finder, I have to go to FIle>Add. So my question is: is there any hope for this bug to be resolved? Are there any other fixes that I may not be aware of? I dunno - I would think this would be a rather glaring problem that more people would be clamoring to have fixed. I'm not a hardcore coder or anything - just someone who writes his own HTML. It just seems sort of... well, primary. I do appreciate the power that Textmate has, and I can understand how useful it can be to people's workflows. But every time I try to "get into" it, something basic like this comes up as a roadblock and puts me off from wanting to use it. (See my old discussion about the Open Document in Running Browser command, which sadly still does absolutely nothing) I want to love Textmate, I really do. Just any help at all would be appreciated. BTW: I'm on a MacBook Pro running OS 10.4.9 and using Textmate build 1.5.5/1368

19 years, 2 months

8
21
0 0

Documentation broken for Ruby in latest build

by Dave Baldwin

Just noticed that getting documentation on a Ruby method (control H) in TM 1.5.5. 1383 now gives an error: web_preview.rb:70 in 'html_head' : undefined method '+' for nilClass This was working for me on earlier TM versions and I haven't changed anything in my Ruby setup for a long time. Dave.

19 years, 2 months

3
6
0 0

Newbie - turn off hyperlink underlining?

by J. Simon van der Walt

I've just been trying TextMate, trying to move away from TextEdit and TextWrangler. One thing which is really bugging me is the way it underlines hyperlinks on the 'Plain Text' setting. If I wanted that kind of behaviour I'd use Microsoft Word! Is there a way I can set it up so that plain text is exactly that, completely plain vanilla typing? Thanks, -- J. Simon van der Walt ----- Composer <http://www.jsimonvanderwalt.com>

19 years, 2 months

5
7
0 0

tm_dialog and really long plists

by Brett Terpstra

Is there a limit to the size of a plist for tm_dialog? If so, is there a workaround? I think I'm hitting a limit, if I take this shell escaped output and manually trim it, I can run it as a shell script that seems alright: /usr/lib/ruby/1.8/rexml/encoding.rb:22: command not found: / Applications/TextMate.app/Contents/PlugIns/Dialog.tmplugin/Contents/ Resources/tm_dialog -mp \<\?xml\ version\=\"1.0\"\ encoding\=\"UTF-8 \"\?\>' '\<\!DOCTYPE\ plist\ PUBLIC\ \"-//Apple\ Computer//DTD\ PLIST\ 1.0//EN \"\ \"http\://www.apple.com/DTDs/PropertyList-1.0.dtd\"\>' '\<plist\ version\=\"1.0\"\>' '\<dict\>' ' \<key\>photosets\</key\>' ' \<array\>' [...hugefrickin'SNIP...] ' \<key\>title\</key\>' ' \<string\>Vista\ Point\</string\>' ' \</dict\>' ' \</array\>' '\</dict\>' '\</plist\>' ' select_photoset /tmp/temp_textmate.1kkRWq:88:in /bin/bash: -c: line 1: unexpected EOF while looking for matching `'' /bin/bash: -c: line 4: syntax error: unexpected end of filecall' from /Applications/TextMate.app/Contents/SharedSupport/Support/lib/ progress.rb:36:in /bin/bash: -c: line 1: unexpected EOF while looking for matching `'' /bin/bash: -c: line 3: syntax error: unexpected end of filecall' from /Applications/TextMate.app/Contents/SharedSupport/Support/lib/ progress.rb:49:in /bin/bash: -c: line 1: unexpected EOF while looking for matching `'' /bin/bash: -c: line 3: syntax error: unexpected end of filefork' from /Applications/TextMate.app/Contents/SharedSupport/Support/lib/ progress.rb:47:in /bin/bash: -c: line 1: unexpected EOF while looking for matching `'' /bin/bash: -c: line 3: syntax error: unexpected end of filedialog' from /Applications/TextMate.app/Contents/SharedSupport/Support/lib/ progress.rb:40:in

19 years, 2 months

6
16
0 0

HTML Bundle in Version 1.5.5 (1383)

by Philip Plante

Hello, I noticed that my TextMate updated this morning to Version 1.5.5 (1383). Along with this came a new feature in the HTML Bundle which I have found is causing me some annoyances. The feature I am talking about is in response to ticket 20CC5FF4. I am using PHP with Smarty as my template engine, and previously I would include  in my code to escape Smarty parsing on script blocks. Now when I do this the entire block of code becomes commented out. While this is not a crucial bug it is a new annoyance for me as it is very useful to have syntax highlighting on script blocks. Here is an example of my code:  <script language="javascript"> function foo() { return "bar"; } </script>  If you require more information please just let me know. If anyone has any idea how to fix this I would greatly appreciate it. Thank you. --- Philip Plante 913-302-9933 mail(a)pplante.com

19 years, 2 months

3
5
0 0

Spell checking using Google

by Andy Herbert

Yesterday on the TextMate irc channel the [gSpell service for OSX][1] was mentioned, which is a fairly neat way of spell checking (more details on the gSpell homepage.) I decided to try and simulate the service as a TextMate command which takes a selection and looks up the most reasonable alternative with Google. [The tmCommand is Available here.][2] [1]: http://nspindel.com/gspell/ [2]: http://homepage.mac.com/andy.herbert/.Public/Check%20Spelling% 20Using%20Google.tmCommand

19 years, 2 months

6
8
0 0

selecting all text cause Find text to fail (in finding string)

by Artie Ziff

Hello, Is it reasonable to have a 'find string' fail only because I happened to have all the text selected in the document window? Changing the selection text back to an ibar cursor seems to have made the sought after string to be found without any other changes to the contents of the document. That seems to have been my experience however I have not re-examined this to be sure. Cheers AZ

19 years, 2 months

2
1
0 0

Re: Spell checking using Google

by Benjamin Jackson

> regarding to the multiple word checking I found a way to do it, but > in Ruby I have no idea to get the REAL length of a (I guess) UTF-8 > string. The point is that s="Fähre" s.length returns 6 not 5. I tried > to set $KCODE = 'UTF-8' in the script but it doesn't work. Take a look at the new Rails Multibyte character support, I think they tackled this problem already and the patches might point you in the right direction. Hell, you might be able to swipe their string extensions outright ;) - Ben

19 years, 2 months

1
0
0 0

Comments automatically continued to next line?

by Andrew Durdin

Hello, After a recent update (I'm not sure which one) to TextMate, I'm finding that every time I write a comment in Python: # whatever and press Return at the end of the line, that TextMate is filling in "# " at the start of the next line. This is really getting in my way, and I'd like to turn it off -- but I can't find which trigger is responsible for this. I thought at first it'd be the "Continue Line Comment" snippet in the Source bundle, but that triggers on Enter. Is there any way to find out which command/snippet is responsible for this without going through all bundles one by one? Andrew

19 years, 2 months

2
2
0 0

Re: Re: [TxMt] 'Save As' Renaming Bug - any hope for the future?

by Simon Gregory

>Thanks. I like the --with-file, but the --with-directory could get >annoying if you regularly want to save copies to a different >directory. Duplicating to the same directory is my most common use case. However there's always scope for both, ie adding the second version to shift-apple-D. If I remember correctly then --with-file will only work when --with-directory is specifed.

19 years, 2 months

2
1
0 0

Re: [TxMt] QuickOpen included files

by Juan Falgueras

El 23/04/2007, a las 14:00, textmate-request(a)lists.macromates.com escribió: > De: Allan Odgaard <throw-away-1(a)macromates.com> > Fecha: 23 de abril de 2007 03:03:18 GMT+02:00 > Para: TextMate users <textmate(a)lists.macromates.com> > Asunto: Re: [TxMt] QuickOpen included files > Responder a: TextMate users <textmate(a)lists.macromates.com> > > > On 20. Apr 2007, at 20:59, Juan Falgueras wrote: > >> I have change the source of the list of paths for QuickOpen >> included files. It works fine: > > Thanks, seems to work fine here as well. Some comments: > > • we should differ between <system> and "user" include paths actually the script does consider <system> and "user" paths and get first the "user" path not looking for TM_HEADER.. when "user" if (!$header) { $line =~ /#\s*include\s*([<"])(.*?)[">]/; $local = $1; $header = $2; } if ($local eq '"') { $t = $ENV{'TM_DIRECTORY'}; if (-f "$t/$header" ) { print "$t/$header"; system("mate -r \"$t/$header\""); exit 0; } } > • TM_HEADER_SEARCH_PATHS should default to the output from gcc/g+ > + (to not require user setup) I have thought about it but, when? If you ask for echo | g++ -E - v -x c++ - and then analyze the output (with the A.Tomazos perl script, for example), you then don't want any TM_HEADER_SEARCH_PATHS, but instead, to call to the g++ compiler for this. I've thought this must be slow, and the answer to the previous query is near always the same. > • search path could depend on whether we are in source.c or > source.c++ (the former has a smaller search path) yes. The difference is (in my system): C++ /usr/include/c++/4.0.0 /usr/include/c++/4.0.0/powerpc-apple-darwin8 /usr/include/c++/4.0.0/backward /usr/local/include /usr/lib/gcc/powerpc-apple-darwin8/4.0.1/include /usr/include /System/Library/Frameworks /Library/Frameworks versus C /usr/local/include /usr/lib/gcc/powerpc-apple-darwin8/4.0.1/include /usr/include /System/Library/Frameworks /Library/Frameworks I have used the most frequently used C++ :) > • additional search paths should be taken from the current Xcode > project file, if any (and Xcode’s products build dir should also > be a search path for frameworks) oups! don't use XCode, sorry. I think it must be done asking XCode (via AS) or hacking the XCode project file... (complicated and dirty) :( > • need to handle framework inclusion, e.g. <Cocoa/Cocoa.h> you are again wright: % locate Cocoa.h /Developer/ADC Reference Library/documentation/Cocoa/Cocoa.html /Developer/ADC Reference Library/documentation/Cocoa/Conceptual/ CarbonCocoaDoc/Articles/CarbonInCocoa.html /Developer/ADC Reference Library/documentation/Cocoa/Conceptual/ CarbonCocoaDoc/Articles/CarbonUIInCocoa.html /Developer/SDKs/MacOSX10.3.9.sdk/System/Library/Frameworks/ Cocoa.framework/Versions/A/Headers/Cocoa.h /Developer/SDKs/MacOSX10.3.9.sdk/System/Library/Frameworks/ JavaEOCocoa.framework/Versions/A/Headers/EOCocoa.h /Developer/SDKs/MacOSX10.4u.sdk/System/Library/Frameworks/ Cocoa.framework/Versions/A/Headers/Cocoa.h /Developer/SDKs/MacOSX10.4u.sdk/System/Library/Frameworks/ JavaEOCocoa.framework/Versions/A/Headers/EOCocoa.h /System/Library/Frameworks/Cocoa.framework/Versions/A/Headers/Cocoa.h is not found by this simple script and there are: % find /System/Library/Frameworks/ -iregex ".*\/Headers\/.*\.h" | wc -l 2112 many. It was not a problem for me since I am working in a UNIX standard programming way... > • need to handle import as well as include (in the regexp) is is easy to add it > > And if I understood Chris correctly, he’d like to optionally > search under /Developer/SDKs/«chosen SDK». As far as I have understood this is included in your Frameworks plus XCode dirs expansion search > > Are there other things we’d like to support? (;

19 years, 2 months

2
1
0 0

About the reStructuredText bundle

by Steve Lianoglou

Hi, Two things tripped me up just now using the reST bundle: (1) I'm not sure if it's broken or not, but the Validate Syntax command didn't work for me as it stands, and it's the first line that's tripping it up for me: `TRST=${TM_PYTHON:=rst2html.py}` I found that most of the rest commands used `TRST=$ {TM_RST2HTML:=rst2html.py}` and when I switched it in for that, it seems to be working. Just out of curiousity, where/how is this $TM_RST2HTML environment variable getting set, anyway (and what's `:=`)? (2) I feel like the "Convert Document to HTML" command should have its output set to "Create New Document" instead of replacing the reST in the file w/ the HTML so you don't blow out the file you've been working on. Thanks, -steve

19 years, 2 months

3
3
0 0

Snippet Question: Insert given values of parameters with pull-down menu

by Hans-Jörg Bibiko

Hi, I have to write much XSL stuff. I use among others the snippet collection of Andreas Schöller (BTW thanks for that). He was so kind to add information about the valid values of parameters. example: Snippet ou => <xsl:output name="" encoding="utf-8|ASCII|US-ASCII|iso-8859-1|utf8|KOI8R|cp1251" indent="no|yes" use-character-maps="mapping1 mapping2" method="text|html|xml|xhtml" /> As usual I can use TAB to jump to each ${n:} token. Now my question: Would it be possible to convert e.g. the token 'text|html|xml|xhtml' into a pull-down menu? I tried it this way: After pressing TAB TM highlights 'text|html|xml|xhtml'; I invoke a command: `echo -en "$TM_SELECTED_TEXT" | ruby -e ' require File.join(ENV["TM_SUPPORT_PATH"], "lib/dialog.rb") words = STDIN.read().split("|") print words[(Dialog.menu words)] '` and I can choose what I want. After that, of course, I cannot use TAB to navigate through the snippet any more, unfortunately. I also tried a snippet like: <xsl:output method="${1:`echo -en "text|html|xml|xhtml" | ruby -e ' require File.join(ENV["TM_SUPPORT_PATH"], "lib/dialog.rb") words = STDIN.read().split("|") print words[(Dialog.menu words)] '`}" encoding="${2:`echo -en "utf-8|ASCII|US-ASCII|iso-8859-1|utf8| KOI8R|cp1251" | ruby -e ' require File.join(ENV["TM_SUPPORT_PATH"], "lib/dialog.rb") words = STDIN.read().split("|") print words[(Dialog.menu words)] '`}"/> In principal this works and the TAB behaviour isn't disturb but I have no visual feedback what I'm typing while the menus popping up and the TAB mechanism starts at token 1 which I already entered. Would it cost much effort to implement such a behaviour? Meaning if I press TAB and within the new selection occurs a given delimiter (here | ) or tag or what ever that the snippet parser will show this selection as pull-down menu automatically without distroying the TAB mechanism. And, would it make sense as a global snippet feature? Regards, Hans

19 years, 2 months

2
2
0 0

auto-line breaks

by David Chartier

Forgive me if this is way too rudimentary of a question, but: I use TextMate to compose some of my blog posts, and sometimes I copy/paste in text from interviews I've done via email (or even chat). Is there any way to make TextMate recognize when there's been a line break between two paragraphs and auto-insert break tags? As it stands now, I need to go in and insert two tags after every line-separated paragraph my interviewees write, which is becoming a PITA. Any thoughts are much appreciated David Chartier -- My work: professional blogger, The Unofficial Apple Weblog: http://www.tuaw.com Assistant Lead Editor, Download Squad: http://DownloadSquad.com My play: 1FPS: http://www.dcharti.com/blog/ Vox: http://dcharti.vox.com

19 years, 2 months

3
2
0 0

Function calls recognition

by Juan Falgueras

Hi using Perl and C/C++ etc.. I think it would be very useful to recognize (grammatically) when a call to a function is done. I know this can be near impossible to solve (with regexps) in the Perl case, since there is no need and many people not use parenthesis after the name of the function. Anyway if you use them it should easily be easy to recognize as function call. If function calls are grammatically recognized, then the power of TM will be increased with thinks like colouring, jump to the definition (only active when in a function call scope), etc. Juan F.

19 years, 2 months

4
3
0 0

"Find in Project Files"

by Chuck Esterbrook

I don't know if this has been suggested before, but I'd like to right click on a selection or an identifier (without having to double click it first) and choose "Find in Project" which would give search results in all files in a project (or a directory if I had opened one). This would be great for quickly exploring code bases. Is there a way to hook this up now given TextMate's flexibility and the existence of the Edit -> Find -> Find in Project ? -Chuck

19 years, 2 months

3
3
0 0

Blogging from behind a proxy

by Bonhôte André

Hi! I'm behind a proxy here, and I'd like to use the blogging bundle. Unfortunately, there's not much of information on this in the internet, so could someone here help me out? My favourised solution would be that TM takes over the system proxy out of OS X's "Location"s. But a hint on how to set the proxy via env would help, too :-) TIA André

19 years, 2 months

3
5
0 0

Multiple Languages per bundle

by Dean Nicholls

Hi All I am slowly making language bundles for the various languages used on the Tandem (HP) NSK systems. So far I have been working on TAL, DDL and the Make file syntax used by ACI. I also hope to do a COBOL/ SCOBOL bundle as well, as time available happens. My question is this. At the moment it appears that all languages must have their own separate bundle. Given that quite a few of these (in particular DDL/Make and a couple of others) are going to be just syntax highlighting, is it possible to have a combined bundle of languages? or do I just suck down each desired language (there's not many - maybe 6 or 7 by the time I eventually finish) having its own bundle entry? Cheers Dean.

19 years, 2 months

2
1
0 0

Symbol preference question

by Colin Hahn

I'm having a problem populating the symbol list in my files. I have created the following preference item: { showInSymbolList = 1; symbolTransformation = 's/(^KW: )(.*)(%)/$2/;'; } My document is filled with lines such as KW: postscript essenceoftruth freedom % (fold) However, the symbol list remains empty. I have double checked that the scope selector for the preference matches the global scope of the document and have closed the bundle editor window. Can someone help me figure out why this is not working? Thanks, Colin Hahn »Geben Sie mir Kaffee, dann mache ich Phänomenologie daraus.« "Give me my coffee so that I can make phenomenology out of it." -- Edmund Husserl

19 years, 2 months

2
1
0 0

Plaintext Bundle. URLs not matched underlined, when matched as bulleted

by marios

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi, everyone. It seems, that in Bulleted Lists the URLs don't get matched as underlined, if they are in a scope of a bulleted list. Wouldn't it make sense to change the Grammar, so it has begin/end clauses for bulleted Items and then make an include rule for it ? One Side effect also, of this is that hitting the Enter key has no result. regards, marios -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.7 (Darwin) Comment: This might change in the future Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org iD8DBQFGL/LF8tSzPOYuZvQRArbrAJ41564Jp/4Qco4TkJCskRB69SDTVQCgjYYV co5cFXikJOmH/FeoQkbrY64= =NuSj -----END PGP SIGNATURE-----

19 years, 2 months

2
2
0 0

2026

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

TextMate