TextMate

textmate@lists.macromates.com

10171 discussions

by Tukaram

Dear TextMate Users, I use TextMate to deal with LaTeX documents. To create the German format for quotations i have to write "`foo bar "' (you have to move your nose very close to the monitor to see the 2nd character after the " character). If I type the first " character a 2nd one appears. That's fine. Then I type the the ` character. It will be completed with an ' char. The results looks like "`'" . This is not what I want. I would like to type the first " and want to get an "`'". What can I do? Regards Tukaram

19 years, 10 months

Solution for XCode>Run with multiple targets ?

by Benoit Gagnon

Is there a workaround for this issue ? The XCode Bundle will not find the active target on its own and complains with a huge tooltip, basically dumping the entire hash of possibilities. Am I restricted to projects with a single target ? thanks Ben

19 years, 10 months

Re: [TxMt] regex question

by Oliver Taylor

> Try this > > #!/usr/bin/perl > local $/; # put Perl in "slurp" mode > $text = <>; # read in the whole file > $text =~ s/(\s+)$//mg; > $text =~ s{((INT\.|EXT\.|I/E\.|int\.|ext\.|i/e\.)\s.*)$}{***$1}mg; > $text =~ s/^([A-Z].*[A-Z)])\n^($.*$)\n(.+)$/\n\t\t\t\t$1\n\t\t\t$2 > \n\t\t$3\n/mg; > $text =~ s/^([A-Z]{2,}.*[A-Z)0-9])\n(.*)$/\n\t\t\t\t$1\n\t\t$2\n/mg; > $text =~ s/^[*]{3}(.+)$/\n$1\n/mg; > $text =~ s/^(.*(IN:|UP:|TO:))$/\n\t\t\t\t\t\t\t\t\t\t$1\n/mg; > $text =~ s/^(\w+.*(\.|\?|\!|\"|\-))\n\w+.*(\.|\?|\!|\"|\-)$/\n$1/mg; > print $text; Wow, thanks Dr. Drang! That worked perfectly. I'll be releasing the bundle soon, and i'll be sure to let you guys know.

19 years, 10 months

why enhanced TODO in Rails.bundle?

by Niko Dittmann

hi. is there any reason, why the enhanced TODO-command is in the rails- bundle and not, say, in the source- or text- or the todo-bundle? (other than syncPEOPLE using it for rails) niko. -- ____________________________ niko dittmann <ni-di(a)web.de> ____________________________

19 years, 10 months

Uncommenting shell script lines

by Trevor Harmon

I often use Comment Line (Command-/) to add and remove comments. I noticed that if I have a shell script snippet like this: # Comment then Comment Line removes the comment. But if the snippet looks like this: #Comment then Comment Line adds yet another comment ("# #Comment"). Is this a bug? I checked the Ruby code for the command in the Bundle Editor but I didn't see anything wrong. Trevor

19 years, 10 months

Intelligent Migration Snippets

by Sami Samhuri

Here are 3 macros, 3 commands, and a small Ruby program that take the DRY principle to another level while writing Rails migrations. These snippets for creating a table, adding a column, and renaming a column will add the opposite actions into self.down for you. I made a 30 second demo video so you can see them in action. You'll find all this on my blog. The address is in my signature. Hope some of you find this useful. -- Sami Samhuri http://sami.samhuri.net

19 years, 10 months

Remembering drawer side

by Steven Wittens

I really like the project drawer and I always keep it on the left-hand side. This is not a problem as long as I use a single window: textmate opens it up in the same location as when I last closed it. But if I open up another window (with a drawer), it is always opened with the drawer on the right hand side. It's really annoying, because (as far as I can tell) the only way to switch drawer sides is to move the window to the right screen edge and then toggle it off and back on again. This wastes quite a lot of time. Is there a way to force left side drawers? Steven Wittens

19 years, 10 months

Re: [TxMt] regex question

by Oliver Taylor

> #!/usr/bin/perl > local $/; # put Perl in "slurp" mode > $text = <>; # read in the whole file > $text =~ s/^([A-Z ]+)\n($.+$)\n(.+)$/\n\n\t\t\t\t$1\n\t\t\t$2 > \n\n$3/mg; > print $text; Of all the solutions proposed here, this once seemed to work the best. Thanks for the tip about processing the entire document in one go. I ended up with the following: #!/usr/bin/perl local $/; # put Perl in "slurp" mode $text = <>; # read in the whole file $text =~ s/(\s+)$//mg; $text =~ s/((INT.|EXT.|I\/E.|int.|ext.|i\/e.)\s.*)$/\*\*\*$1/mg; $text =~ s/^([A-Z].*[A-Z \)])\n^($.*$)$\n(.+)$/\n\t\t\t\t$1\n\t\t\t $2\n\t\t$3\n/mg; $text =~ s/^[A-Z]{2,}.*[A-Z\)\d]$\n^(.*)$/\n\t\t\t\t$1\n\t\t$2\n/; $text =~ s/^\*\*\*//mg; $text =~ s/^(.*(IN:|UP:|TO:))$/\n\t\t\t\t\t\t\t\t\t\t$1\n/; $text =~ s/^(\w+.*(\.|\?|\!|\"|\-))$\n^\w+.*(\.|\?|\!|\"|\-)$/\n$1/mg; print $text; ...but it doesn't work at all. I'm guessing that it's something obvious that I can't see, but in case it's not an explanation of what I'm trying to do follows. 1. removes trailing whitespace at the end of a string (which is common in the format I'm importing from. 2. appends three *'s to the beginning of what I'll call well-formed sluglines so that step 4 doesn't apply to these are well. 3. finds a specific set of lines, a Character followed by Parenthetical, followed by Dialoge. And formats it. 4. finds Character followed by Dialogue when there is no Parenthetical, and formats it. 5. repairs the sluglines that were changed in step 2. 6. formats transitions. 7. formats regular paragraphs (this is a little funky, but it's my fault). I can do all these in the Find&Replace window, but I get nothing when running this bundle command. You can find a sample document to test the script on here: http:// ollieman.net/files/bundles/braveheart-sample-unformatted.txt And you can find what the result should look like here: http:// ollieman.net/files/bundles/braveheart-sample-formatted.txt Thanks again for all the help. This will allow we to switch full-time from Final Draft to TextMate. Something I'm really looking forward to.

19 years, 10 months

Re: RFC: Command Output Options (was: Combining snippets and commands?)

by Benjamin Jackson

> this would not allow for commands that take the whole document as > input and the current selection as output, and autocompletion > thingies wouldn't work _that_ good, so considering this I'm on +1 for > allan's proposal. I think some minor changes to the wording of Allan's solution might make it more readable. What about: Output: [ Discard ] [ Text ] and [ pop-up ] [ Snippet ] and [ pop-up ] [ HTML ] [ Tool Tip ] [ New Document ] And then the pop-up showing for the Text and Snippet output options have the folowing options: and [ Replace Input ] [ Replace Selection ] [ Replace Document ] [ Insert After Caret ] This version uses more [action verbs][1], which makes it read more logically. > by the way, I'd like an option to show the output as a popup menu (or > something like that): this would perfectly suit autocompletion. think > about it, al. I'll second that. Nice ideas, Allan! Cheers, Ben [1]: http://developer.apple.com/documentation/UserExperience/Conceptual/ OSXHIGuidelines/XHIGMenus/chapter_16_section_3.html#//apple_ref/doc/ uid/TP30000356-TPXREF117 ___________________ Ben Jackson Diretor de Desenvolvimento ben(a)incomumdesign.com http://www.incomumdesign.com

19 years, 10 months

Pdfsync or tiger ability ?

by Alain Matthes

hello:) TeXShop can provide synchronization in two ways. "pdfsearch" : The default method uses a new ability in Mac OSX 10.4 to search for strings in pdf files. No special style files need be included to use this method. "pdfsync" is the original method but needs to add the following line to the preamble of your tex source code before the \begin{document} line: \usepackage{pdfsync}. Is it to possible to use in the future, the first method "pdfsearch" with Textmate Thanks Alain

19 years, 10 months

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

TextMate