TextMate

textmate@lists.macromates.com

10171 discussions

Latex Watch previewers' strange behavior on Leopard

by Gildas Hamel

I installed os-x 10.5 last weekend. Since then, when using TextMate 1436 and LatexWatch, I observe the following behavior: the pdf preview window, in TeXShop, doesn't gain focus and refresh until I click on it: it then refreshes . If I switch to Skim as previewer, no refresh even with clicking on the Skim window to give it focus. I had been using both for several months, without any problem whatsoever. Here is the console line I get regarding TeXShop as previewer: 10/29/07 10:03:11 AM TextMate[177] loadPlugIn: Dialog plug-in with same bundle identifier (com.macromates.dialog_plug-in) already loaded With Skim, I get the following window message: Unable to read notes for ~/Documents/Work/Writing/Journal/2007/July.pdf, but a Skim notes file with the same name was found. Do you want Skim to read the notes from this file? I click OK, but Skim doesn't refresh, though I have "check for file change" preference on (and have restarted everything). Here is the console reading concerning Skim: 10/29/07 10:24:14 AM TextMate[888] loadPlugIn: Dialog plug-in with same bundle identifier (com.macromates.dialog_plug-in) already loaded 10/29/07 10:24:26 AM Skim[926] .sdef error: Operation could not be completed. (NSXMLParserErrorDomain error 1549.) 10/29/07 10:24:26 AM Skim[926] line number: 2 I have sent as detailed a description I could to Apple Software/Support but thought I could get some help from the LateX people on TextMate. --Gildas Hamel

18 years, 1 month

Can't get Textmate to use Skim as a PDF viewer

by Bill McNeill

My Mac Mini is configured to use Skim as the PDF viewer called from Textmate's LaTeX bundle, however I still view compiled .PDF files inside Textmate. I need help configuring Textmate so that it will automatically launch Skim. Intel Mac Mini OS X: 10.4.10 Textmate version: 1.5.7 (1436) I have the following Textmate environment variables set in Preferences->Advanced->Shell Variables: TM_LATEX_ERRLVL 1 TM_LATEX_COMPILER latexmk.pl TM_LATEX_VIEWER Skim Skim Version: 0.9.3 (v15) Skim has Prefereces->Sync "Check for file changes" checked and the Preset set to "Textmate". I am using fink's LaTeX distribution. Skim works. It is my default .PDF viewer in Finder. I can use it to open and view .PDF files. If I successfully compile a LaTeX document in Textmate using apple-R, the compiled .PDF file appears in the "Typeset and View" window owned by Textmate instead of a Skim process. I have another computer, a Mac Book, that as far as I can tell is configured identically. On this machine, Textmate launches Skim as its .PDF viewer as expected. I'm out of ideas on how to debug this. Any suggestions? Thanks for any help. -- Bill McNeill http://staff.washington.edu/billmcn/index.shtml

18 years, 1 month

Bug in Ruby Bundle ctrl-{ snippet? (was Re: [TxMt] Ctrl key and shortcuts cease working)

by Rick DeNatale

I've noticed some ctrl-key snippet wierdness in the Ruby Bundle. Until the latest update, the ctrl-{ snippet to toggle blocks between {} and do;end forms either didn't work at all, or worked intermittently. I believe that this broke with the previous cutting-edge update some weeks ago. I just checked for updates, and I'm running 1436 as well, although the latest version mentioned when I view the release notes is 1435. Since Matt reported the problem with version 1436, I tried the snippet just now, and here is how this line of ruby code: a.each { | f| f } evolves after a sequence of pressing ctrl-{ with the cursor after either the { or do as appropriate. a.each do | f| f end a.each { |; f| f } a.each do |; f| f end a.each { |;; f| f } On 10/29/07, Matt Freels <matt(a)furtherin.net> wrote: > I just ran into a problem where after the recent update (version > 1436), all of TM's shortcuts involving the ctrl key broke. > > All of the emacs-like keybindings seem to still work, though. > > I've tried resetting all of the preferences i could think of > including a new user account. -- Rick DeNatale My blog on Ruby http://talklikeaduck.denhaven2.com/

18 years, 1 month

Theme colors messed up in last update

by Yann B

Since the last update, my HTML colors are messed up if I have some php at the top of the page, everything else after that is treated as "embedded source" from the "fonts & color" pref pan. If I just put: <?php ?> on top, it's fine, but if I put something like: <?php require_once('_php/some_file.php'); ?> The everything under is just a big chunk of the same color... Anyone else got that? And found a way to fix it... Any suggestion much appreciated. Thanks! - Yann ......................................... Yann Bettremieux minimal design LLC 244 Fifth Avenue Suite P233 New York, NY 10001-7604 USA tel / fax: 212.931.8525 email: yann(a)minimaldesign.net site: http://minimaldesign.net The information in this email may be confidential and/or legally privileged. This email is intended to be reviewed by only the individual or organization named above. If you are not the intended recipient or an authorized representative of the intended recipient, you are hereby notified that any review, dissemination or copying of this email and its attachments, if any, or the information contained herein is prohibited. If you have received this email in error, please immediately notify the sender by return email and delete this email from your system.

18 years, 1 month

Re: turning off auto formatting

by dushanm＠spinn.net

dvlogic wrote: > You can use the matlab bundle from the SVN repository. Octave is > mostly compatible with the matlab syntax. I didn't know there was such a bundle. Thanks for telling me. But where do I find it? I did find one from a few months ago (June) by kjosmoen, but this didn't seem to be on SVN - whereever that is located - and I don't know if it's the most recent. Regarding your other questions, I don't know the answers unfortunately. - Dushan

18 years, 1 month

Re: turning off auto formatting

by dushanm＠spinn.net

On 26 Oct 2007, at 01:07, DushanM wrote: >> I'm using TextMate to write some script files for the computational >> program Octave. These are text files, but TextMate insists on ad- >> ding formatting that I don't want. How do I turn this automatic >> formatting off? Ciarn Walsh wrote: > What kind of formatting are you talking about? Perhaps you mean > indentation? You should make sure you have the language set to Plain > Text by using the popup menu on the bottom of the window. Thank you, that's just what I needed. I didn't know where the switch was :) > Even better, of course, would be to write a grammar for Octave ;) Yes, that sounds like a good idea, but I'm too new to TextMate, and to Octave, to know how to do that. Maybe later as I learn more... - Dushan

18 years, 1 month

Re: [TxMt] Leopard Spaces

by Dave Winzler

Hi Steve, > Anyway, that's just a long way of saying that I don't think it's TM's > fault, but rather a design flaw in Spaces that I hope Apple will soon fix. Thanks for the quick reply and for explaining that, I'm glad it's not TextMate. I've used 3rd party virtual desktops for a few years, and I've never seen that behavior before. As you say, I hope Apple fixes it soon. Cheers, - d

18 years, 1 month

TmCodeBrowser Leopard update

by Gerd Knops

TmCodeBrowser needed a small fix to be compatible with Leopard. Version 1.09 is now available at http://www.cocoabits.com/TmCodeBrowser/ Gerd

18 years, 1 month

turning off auto formatting

by dushanm＠spinn.net

I'm using TextMate to write some script files for the computational program Octave. These are text files, but TextMate insists on adding formatting that I don't want. How do I turn this automatic formatting off? - Dushan PS, I had sent this same msg almost a week ago, but never saw it appear in the digest. But in the 'From:' I had forgotten to switch it from <not.for(a)public.display> to my real email address. Could this be the explanation?

18 years, 1 month

Leopard Spaces

by Dave Winzler

I'm wondering if anyone else is using TextMate with Leopard Spaces and seeing weird behavior. If I open up a document window in TextMate in Space 1 and leave it there, all is well and there's no problem. If I move the window to Space 2, when I Save the document stays on Space 2 (like it should), but the view switches back to Space 1. The same thing happens when hit Command-F to find: the document stays on Space 2 while the view switches back to Space 1. If I close TextMate, switch to Space 2, then open a document, everything stays on Space 2 and all is well. If I then move the document window to Space 1, I get the same problems with switching Spaces. Is this a quirk with my setup or is anyone else seeing this? - d

18 years, 1 month

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

TextMate