TextMate

textmate@lists.macromates.com

10171 discussions

Re: How to get HTML code of bundle TextMate -> Create HTML from Document

by Brandon M Fryslie

>When I run that command, I get a new document with the HTML and CSS source. I haven?t changed anything from the defaults. Open the Bundle Editor, locate that command, and make sure the output is set to ?Create New Document?. I suspect it got set to ?Show as HTML? somehow. Lovely! That was it! It works great now. Brandon On Wed, Feb 23, 2011 at 7:51 PM, <textmate-request(a)lists.macromates.com>wrote: > Send textmate mailing list submissions to > textmate(a)lists.macromates.com > > To subscribe or unsubscribe via the World Wide Web, visit > http://lists.macromates.com/listinfo/textmate > or, via email, send a message with subject or body 'help' to > textmate-request(a)lists.macromates.com > > You can reach the person managing the list at > textmate-owner(a)lists.macromates.com > > When replying, please edit your Subject line so it is more specific > than "Re: Contents of textmate digest..." > > > Today's Topics: > > 1. How to hide the scrollbar of textmate (Elvis Zhou) > 2. Re: How to get HTML code of bundle TextMate -> Create HTML > from Document (Brandon M Fryslie) > 3. Re: How to get HTML code of bundle TextMate -> Create HTML > from Document (Rob McBroom) > 4. Re: c++ library boost (Chris Patti) > 5. Command-Enter quit working (Pete Lasko) > 6. Re: Command-Enter quit working (Mark Jackson) > 7. Re: Command-Enter quit working (Pete Lasko) > 8. Re: Command-Enter quit working (Will) > 9. Re: Command-Enter quit working (Mark Jackson) > > > ---------------------------------------------------------------------- > > Message: 1 > Date: Wed, 23 Feb 2011 21:44:04 +0800 > From: Elvis Zhou <cassyfar(a)gmail.com> > To: textmate(a)lists.macromates.com > Subject: [TxMt] How to hide the scrollbar of textmate > Message-ID: <30C9993F-4ADD-4DD3-9500-69AC2F48B95E(a)gmail.com> > Content-Type: text/plain; charset=us-ascii > > How could I hide the vertical and horizontal scroll bars in textmate? > And is there any possible way to let the scroll bar never shows up even > though my codes are more than one page? > > Tkanks in advence > > ------------------------------ > > Message: 2 > Date: Wed, 23 Feb 2011 09:46:25 -0700 > From: Brandon M Fryslie <bmf(a)email.arizona.edu> > To: textmate(a)lists.macromates.com > Subject: [TxMt] Re: How to get HTML code of bundle TextMate -> Create > HTML from Document > Message-ID: > <AANLkTink0TVuemCTVHZxBqmzcM04ytH2BBL-N9VXdPgK(a)mail.gmail.com> > Content-Type: text/plain; charset="iso-8859-1" > > > > > I usually go into the menu at the top; File / "New From Template", choose > > "HTML" scroll around some more, and choose from there. > > > > CSS is began from the same menu; File / Plain Text, then at the bottom of > > the plain text doc one will see the words plain text and some little > > triangles for clicking on that reveal a menu to choose, CSS is in there. > > > > So it seems a drill down procedure.The Preferences allow for doc of > choice > > to appear at start up. > > > That is how to create a new HTML or CSS document. > > I want to get the results of the command TextMate -> "Create HTML From > Document". This command is located in the "TextMate" bundle. This command > takes the contents of the currently opened file and turns it into HTML, > preserving the syntax highlighting by embedding CSS code into the document. > On e-TextEditor for Windows, for example, the same bundle generates a page > of markup. However on TextMate, it opens directly in a Web Preview window > from which I am unable to extract the markup. > > Is there a) some way to prevent it from opening in web preview? Or b) some > way to directly get the contents as source of a web preview window? > > Thanks > Brandon >

15 years

Re: Ruby - "keep TM version" popup question... (plastichairdoo)

by Brandon M Fryslie

You can try the terminal command lsof [FILENAME]. lsof with no options displays all opened files, lsof -t [FILENAME] displays 'terse' output of the process ID, suitable for piping to kill. Brandon

15 years

Storing variables on a window by window basis

by Sean Dunn

Hi all, I'm new to writing TextMate bundles so I was wondering if someone could give me some pointers here. I'm trying to store information from the output a bundle command against the current file. The idea is that this could then be retrieved by another bundle command run latter. This information doesn't need to be persistently stored, it's only used during editing so if I can I'd prefer not to litter the file system with these small files. Ideally, I'd like to do something like: $MY_VAR = "some value or other" Any of how to do this or a flat answer of you can't at the current time would be gratefully received. Cheers, Sean.

15 years

Re: How to get HTML code of bundle TextMate -> Create HTML from Document

by Brandon M Fryslie

> > I usually go into the menu at the top; File / "New From Template", choose > "HTML" scroll around some more, and choose from there. > > CSS is began from the same menu; File / Plain Text, then at the bottom of > the plain text doc one will see the words plain text and some little > triangles for clicking on that reveal a menu to choose, CSS is in there. > > So it seems a drill down procedure.The Preferences allow for doc of choice > to appear at start up. That is how to create a new HTML or CSS document. I want to get the results of the command TextMate -> "Create HTML From Document". This command is located in the "TextMate" bundle. This command takes the contents of the currently opened file and turns it into HTML, preserving the syntax highlighting by embedding CSS code into the document. On e-TextEditor for Windows, for example, the same bundle generates a page of markup. However on TextMate, it opens directly in a Web Preview window from which I am unable to extract the markup. Is there a) some way to prevent it from opening in web preview? Or b) some way to directly get the contents as source of a web preview window? Thanks Brandon

15 years

Rails Keyboard Shortcuts

by Trenton Scott

How to I get the keyboard shortcuts to work for Rails? I'm trying to Insert ERb's like <%= %> and <% %> and the commands should be Ctrl + Z and Ctrl +X -- it doesn't work. I have the document type set to Ruby on Rails. Any ideas on what I'm doing wrong?

15 years

Command-Enter quit working

by Pete Lasko

Anyone know what might cause Command-Enter to quit working? It just stopped one day quite a while ago and hasn't worked since. Somebody help!

15 years

c++ library boost

by Andre de Boer

Hello, How can I include boost libraries with Textmate? Thanks for the answer. André // simple_example_1.cpp #include<iostream> #include<boost/tokenizer.hpp> #include<string> int main(){ using namespace std; using namespace boost; string s = "This is, a test"; tokenizer<> tok(s); for(tokenizer<>::iterator beg=tok.begin(); beg!=tok.end();++beg){ cout << *beg << "\n"; } }

15 years

Bug resolved, Shell Script Plugin, TMPFILE creation

by robertharder.alt＠mac.com

BUG: When using the Shell Script plugin's tempfile creation expansion (temp[tab]), a dollar sign gets left out: temp[tab] becomes TMPFILE="(mktemp -t Convert_ClassOO_Metrics_To_Tabular)" trap "rm -f '$TMPFILE'" 0 # EXIT trap "rm -f '$TMPFILE'; exit 1" 2 # INT trap "rm -f '$TMPFILE'; exit 1" 1 15 # HUP TERM Note the missing dollar sign $ in the first line to make the parentheses executable. FIX: I added a backslash in the bundle before the dollar sign that's there and is getting dropped (or rather, interpreted as a variable probably): ${1:TMPFILE}="$(mktemp.... becomes ${1:TMPFILE}="\$(mktemp.... ${1:TMPFILE}="\$(mktemp -t ${2:`echo "${TM_FILENAME%.*}" | sed -e 's/[^a-zA-Z]/_/g' -e 's/^$/untitled/'`})" ${3:${4/(.+)/trap "/}${4:rm -f '\$${1/.*\s//}'}${4/(.+)/" 0 # EXIT /}${5/(.+)/trap "/}${5:rm -f '\$${1/.*\s//}'; exit 1}${5/(.+)/" 2 # INT /}${6/(.+)/trap "/}${6:rm -f '\$${1/.*\s//}'; exit 1}${6/(.+)/" 1 15 # HUP TERM /}} Not sure how to work that change into the codebase. -Rob

15 years

opening TextMate with always the same default project

by Florent Florent

Hello, TextMate is opened with my session when I start my Mac. I would like that TextMate always automatically opens the same project when it starts. Is that possible? Thanks! Florent

15 years

How to get HTML code of bundle TextMate -> Create HTML in Document

by Brandon M Fryslie

When I use this bundle, it pops up a window with the HTML code rendered, but I cannot for the life of me figure out how to get the HTML so I can use it. Can someone help me? Somewhat related, is there a way I can apply my own custom CSS to the web preview window? Thanks Brandon

15 years

Jump to page:

2026

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

TextMate