TextMate October 2006

textmate@lists.macromates.com

197 participants
272 discussions

Re: crtl-esc not activating - my solution

by ira cary blanco

You might need to logout/restart/fast-user-switch after ARD sharing turning it off before you regain control of crtl-esc NOTE, I've also found out that the ARD administrator application ALSO grabs/blocks this keystroke. So if you're ARD sharing is off, but you're running the ARD administrator application, crtl-esc will not work in TextMate. I'm not an Apple Developer, nor am I sure this is a bug with ARD (it may be intentional), so I'm not comfortable submitting a bug report. If you would like to submit it if you have the same results, be my guest. - Ira On Oct 16, 2006, at 5:48 AM, textmate-request(a)lists.macromates.com wrote: > From: Caius Durling <nemo8686(a)mac.com> > Date: October 16, 2006 2:25:59 AM EDT > To: TextMate users <textmate(a)lists.macromates.com> > Subject: Re: [TxMt] crtl-esc not activating - my solution > Reply-To: TextMate users <textmate(a)lists.macromates.com> > > >> The short story is that running ARD (Apple Remote Desktop) Client >> is the culprit that is stealing the key sequence. >> >> I don't know why ARD steals the key sequence, but turning it off >> (System Preference - under Sharing) eliminates this problem for me. > > I open System Preferences, untick ARD sharing in the sharing > prefpane, quit System Preferences, Relaunch TextMate, and it still > doesn't work when I hit ⌃⎋. > > Have you rebooted/logged out after turning it off or anything? > >> I'd like to run the ARD client, so if anyone knows how to have the >> ARD client run without it stealing the crtl-esc key sequence, I'd >> like to hear about it. > > Possibly submit this as a bug to apple: http://developer.apple.com/ > bugreporter/ > > Caius

18 years, 2 months

blogging bundle problems

by Claus Haslauer

Hi, I just started to try out the blogging bundle. My blog runs under wordpress 2.0 I watched the screencast. Fetching blog entries works. Editing and posting them works. However, two things (so far) don't work" 1) When I drag a picture into the message in TextMate, this error message occurs: Error uploading image. Check your configuration and try again. 2) When I use cut and the tab trigger, this line gets inserted, but it doesn't fold in the posted blog entry like it should. The result is like the cut line wasn't there... Any ideas why those two issues arise? I'm not exactly sure what an API endpoint is... (this is where some comments in http://macromates.com/blog/archives/2006/06/19/blogging-from-textmate/ lead to) right now I set my blog adress in com.macromates.textmate.blogging.txt to http://<USERNAME>/<abc.net>/xmlrpc.php where <USERNAME> is the username I use in wordpress <abc.net> is the domain name, where the blog is. using http://<USERNAME>/www.<abc.net>/xmlrpc.php or http://<USERNAME>/<abc.net>/wordpress/xmlrpc.php make things worse Thanks, Claus

18 years, 2 months

Re: [TxMt] remote editing with textmate

by Bill Duenskie

I would definately need write and create ability, that stinks. Is there a program that can be purchased that would allow me to mount an FTP with read, write and create? Thanks! ----- Original Message ---- From: Helge Hartmann <helge.hartmann(a)gmx.de> To: TextMate users <textmate(a)lists.macromates.com> Sent: Tuesday, October 10, 2006 4:03:13 AM Subject: Re: [TxMt] remote editing with textmate The problem is, that the finder only mounts ftp server read-only. Helge Am 10.10.2006 um 06:11 schrieb Dave Grijalva: the mac can do this natively. in finder, choose Go > Connect to Server... (cmd+K). You can mount NFS, SMB, and FTP. Sadly, there is no SFTP or FTPS support. -dave On 10/9/06, Bill Duenskie <bduenskie(a)yahoo.com> wrote: I know Textmate doesn't have remote editing built in, but is there a program that is similar to www.webdrive.com on a mac? Basically webdrive allowed you to connect to a FTP server and map the connection to a drive. Can anyone recommend a similar program on a mac? ______________________________________________________________________ For new threads USE THIS: textmate(a)lists.macromates.com (threading gets destroyed and the universe will collapse if you don't) http://lists.macromates.com/mailman/listinfo/textmate ______________________________________________________________________ For new threads USE THIS: textmate(a)lists.macromates.com (threading gets destroyed and the universe will collapse if you don't) http://lists.macromates.com/mailman/listinfo/textmate ______________________________________________________________________ For new threads USE THIS: textmate(a)lists.macromates.com (threading gets destroyed and the universe will collapse if you don't) http://lists.macromates.com/mailman/listinfo/textmate

18 years, 2 months

Re: Re: [TxMt] blogging bundle problems

by Claus Haslauer

Hello Brett, hello list, sorry, the @ symbol was actually there. I accidentally must have deleted it while writing the message. The cut tab trigger still does not work. Where am I supposed to put it (I am resorting to really weired questions... but I really have no idea why it doesn't work... something must be right, because it fetches the posts ok)? So far I do this: blah blah <retun> cut <tab> [inserts curser into a new line] <return> blah blah After I tell textmate to post to the blog, the post shows up. Both in the blog itself and in the individual post it shows up as if I had written blah blah <return> blah blah In textmate after posting, the scissors symbols are gone, and there are 4 empty lines instead. Thanks for your help, Claus On 16-Oct-06, at 8:00 AM, textmate-request(a)lists.macromates.com wrote: > From: Brett Terpstra <brett(a)circlesixdesign.com> > Date: October 16, 2006 5:53:47 AM EDT (CA) > To: TextMate users <textmate(a)lists.macromates.com> > Subject: Re: [TxMt] blogging bundle problems > Reply-To: TextMate users <textmate(a)lists.macromates.com> > > > > On Oct 15, 2006, at 9:00 PM, Claus Haslauer wrote: > > [...] >> right now I set my blog adress in >> com.macromates.textmate.blogging.txt to >> http://<USERNAME>/<abc.net>/xmlrpc.php >> where >> <USERNAME>is the username I use in wordpress >> <abc.net>is the domain name, where the blog is. > [...] > > You want to replace the slash with an @ symbol after the USERNAME. > > That should work for you. > > Brett > Claus Haslauer: Groundwater Resources Management, University of Waterloo chaslaue(a)scimail.uwaterloo.ca | +1 (519) 888 4567 x.37232 | icq - 126499030

18 years, 2 months

Re : [TxMt] how to disable spell checking

by Francois

OK thanks a lot F ----- Message d'origine ---- De : Michael Reece <mreece(a)vinq.com> À : TextMate users <textmate(a)lists.macromates.com> Envoyé le : Lundi, 16 Octobre 2006, 21h21mn 14s Objet : Re: [TxMt] how to disable spell checking Edit -> Spelling -> Check Spelling -> Never On Oct 16, 2006, at 12:03 PM, Francois wrote: Hello all, I am just installing TextMate on my new iMac and I face la little problem : by default, spell checking is activated. My question : how can I disable spell checking ? Thanks G ___________________________________________________________________________ Découvrez une nouvelle façon d'obtenir des réponses à toutes vos questions ! Demandez à ceux qui savent sur Yahoo! Questions/Réponses http://fr.answers.yahoo.com ______________________________________________________________________ For new threads USE THIS: textmate(a)lists.macromates.com (threading gets destroyed and the universe will collapse if you don't) http://lists.macromates.com/mailman/listinfo/textmate --- michael reece :: software engineer :: mreece(a)vinq.com ______________________________________________________________________ For new threads USE THIS: textmate(a)lists.macromates.com (threading gets destroyed and the universe will collapse if you don't) http://lists.macromates.com/mailman/listinfo/textmate ___________________________________________________________________________ Découvrez une nouvelle façon d'obtenir des réponses à toutes vos questions ! Demandez à ceux qui savent sur Yahoo! Questions/Réponses http://fr.answers.yahoo.com

18 years, 2 months

Find in document: list all lines for a pattern and jump to one by clicking?

by Hans-Joerg Bibiko

Hi, many times I have the following task. list all lines for a specific search pattern within my document and navigate to some/all lines in order to do something OK. I do this with 'Filter Through Command' : grep -ni PATTERN ; Input: Document; Output New Document I get a list of lines containing my PATTERN with the line number as prefix. My question is now: Is there an elegant way to click on one line, get the leading line number, and go to that line in my main document? If clicking would be a problem drag'n'drop would also work. I looked for a command like 'go to line' but I didn't find it. Even with a macro I didn't come to grips it. Many thanks in advance Hans PS Maybe it would be worth to implement this search option in TM(?)

18 years, 2 months

Makefile bundle syntax enhancement

by Jan Lehnardt

The attached patch adds support for the ?= operator in the Makefile bundle. I'm not sure about the procedure of submitting patches and getting them committed to svn, so I hope somebody can pick it up from here or point me to the proper place. Thanks, Jan --

18 years, 2 months

exporting/saving a bundle

by Bill Duenskie

How do you save or export a bundle? I just created a new one and want to make sure I don't lose it. Thanks, Bill

18 years, 2 months

NDA bug reports?

by Fritz Anderson

Some instinct tells me that the email address Allan exposes to this list is a throwaway. It's therefore possible he doesn't read mail sent to that address. How might I report bugs that are not for publication, because they involve proprietary or nondisclosed software? Neither this list nor the public bug-tracking DB are appropriate. Maybe in my usual fatheadedness (and I take it as an insult that the Mac spelling checker includes "fatheadedness") I've missed a way to submit a bug to the DB without publishing it? — F

18 years, 2 months

Blogging Bundle: Blog command

by Caius Durling

When I create a blog markdown document and then type `blog⇥' it pops up the dialog to allow me to choose my blog. (If I have more than one blog defined.) If I hit cancel in the dialog it pops up a tooltip about how I need to setup my blogs as none are defined. This should probably be corrected. Expected behaviour: Dialog cancels and leaves me with the text `blog' after typing `blog⇥' Actual behaviour: When you hit cancel it pops up a tooltip saying that no blogs are setup and that I need to set them up. Fix: catch a cancel and return nothing? Caius ____________________________________ Caius Durling UK Student tel: +44 (0) 7746 746039 email: inemo(a)mac.com nemo8686(a)mac.com web: http://caius.name/ http://qwert.us/ ____________________________________

18 years, 2 months

← Newer
1
...
14
15
16
17
18
19
20
...
28
Older →

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

TextMate October 2006