- TextMate - lists.macromates.com

Re: TM2 is slower compared to TM1 in some areas

by Max Lein

On 12.12.2013, at 00:46, Allan Odgaard wrote: > This is because TM2 is more flexible in how words are defined so it > needs to lookup scope settings for each character when collecting the > list of words. Autocompletion (e. g. of labels or of references) has become so slow for me that I now insert labels and references by hand again. And autocompletion was one of the killer TextMate features for me. That's not a good sign, and I hope that optimizing the new autocompletion implementation will get priority. Because if people tend to rely on the feature less, it doesn't matter that in principle, the reimplementation of autocompletion is more powerful than the TextMate 1 incarnation. I'd rather have a less powerful, but faster and more reliably feature than one that is aggravatingly slow. Max

12 years, 2 months

2
1
0 0

latex templates

by Ross Ahmed

I’m trying to save a latex template. I a .tex file, I pressed temp+TAB which gave the following message: "You need to create the directory /Users/rossahmed/Library/Application Support/LaTeX/Temp|ate/ ﬁrst and populate it with your favorite LaTeX template ﬁles before using this command”. I followed the instructions in the message, but if I press temp+TAB again, I just get the same message. How can I get templates to load? Thanks Ross

12 years, 3 months

2
1
0 0

Text mate cutting text when reloading file.

by Jesús Baquedano

hi, if I open a file with text mate 2, I modify the file from outside and I reopen the file with text mate, text mate does not load the entire file.

12 years, 3 months

2
1
0 0

Inserting lines with the RETURN key.

by Curt Sellmer

When editing a C file, when I type `{` Textmate will add a matching `}`. If I then press RETURN I get two new lines where the `}` is on the second and the cursor is correctly indented on the line in between. I have been working on a Scala bundle, and when I do the same in Scala, I only get one inserted line with the cursor sitting just before the `}`. Is there some setting that I am missing to get this behavior?

12 years, 3 months

2
2
0 0

TM2 is slower compared to TM1 in some areas

by Jacob Carlborg

I have two examples where TM2 is slower compared to TM1. 1. I think this has been mentioned before but TM2 takes significant longer time to syntax highlight large files compared to TM1. An example is this file from the D standard library: https://raw.github.com/D-Programming-Language/phobos/master/std/datetime.d It might be a bit extreme, it's around 34 000 lines of code. If I open that file and then jump to the end of the file. It takes TM1 around 5 seconds until the code has syntax highlighting. In TM2 it takes around 15 seconds. 2. TM2 is also slower on auto completion for some files. Here is one example: https://github.com/d-widget-toolkit/dwt-mac/blob/master/dwt/widgets/Display… If I put the cursor at line 2111 at, type "o" and press escape to do auto completion. In TM1 I immediately get a result. In TM2 I get a result after around 3 seconds. Is there anything that can be done to increase the performance in these two areas? -- /Jacob Carlborg

12 years, 3 months

3
3
0 0

how to disable bundle

by matt＠tidbits.com

Just getting my feet wet with TextMate 2 and already I've got a question. What's the purpose of the checkboxes next to the names of bundles if they don't actually disable the bundle? For example, I still see Apache and AppleScript in the Bundles and Gear menus even though I have unchecked Apache and AppleScript in the preferences. Similarly, I've tried unchecking in the Bundle editor and that doesn't help either. Is there a correct way to eliminate unused bundles? Thx - m. -- matt neuburg, phd = matt(a)tidbits.com, http://www.apeth.net/matt/ RubyFrontier! http://www.apeth.com/RubyFrontierDocs/default.html

12 years, 3 months

3
3
0 0

how to get TextMate environment variables from rakefile?

by matt＠tidbits.com

I am running a rakefile directly from Ruby, in order to run some tests. The tests work fine when run individually from inside TextMate 2, but some of them break when run thru the rakefile directly from Ruby. The reason is that those tests use the TM_SUPPORT_PATH environment variable. That variable doesn't exist when we are running the rakefile directly from Ruby. Is there a way my rakefile script can ask TextMate for the value of its TM_SUPPORT_PATH even though it is not running inside TextMate? I can solve the problem by just hard-coding the answer into my rakefile, but that is not a portable solution. (Indeed, the issue arose in the first place because I *was* hard-coding the answer into my rakefile, using TextMate 1; but in TextMate 2, the value of TM_SUPPORT_PATH has changed. That's why I'd like a way to ask TextMate directly "what's your TM_SUPPORT_PATH?") Thx - m. -- matt neuburg, phd = matt(a)tidbits.com, http://www.apeth.net/matt/ RubyFrontier! http://www.apeth.com/RubyFrontierDocs/default.html

12 years, 3 months

3
2
0 0

unable to save file

by Lewy

Using TM2 release 9497 When I attempt to save a file (demo.php) TM2 reports that it is Unable to save file. Check console for details. When I look in Console, I didn't find an entry from this date from Textmate. Where, specifically, should I look for what is happening? The file itself can be replaced, but it would be nice to understand what's happening. Can anyone explain? --Lewy

12 years, 3 months

3
2
0 0

Re: asciidoc bundle

by Matt Neuburg

Dave Baldwin wrote (a long time ago, Mon Aug 19 08:17:37 UTC 2013 to be exact): > Has anyone had any experience with the asciidoc bundle > https://github.com/zuckschwerdt/asciidoc.tmbundle with Textmate 2 or has a > better one they are prepared to share? > > This bundle has had little work done on it in the last 3 years so was > written with Textmate 1 in mind. Also since then a nicer toolchain for > processing asciidoc files called asciidoctor has been written and is being > actively developed. I've been writing more or less continuously using the asciidoc TextMate bundle since May 2010, so that's 3-and-a-half years, during which I've produced and edited thousands of pages: http://oreilly.com/catalog/9781449397296 http://shop.oreilly.com/product/0636920023562.do http://shop.oreilly.com/product/0636920029717.do http://shop.oreilly.com/product/0636920032465.do http://shop.oreilly.com/product/0636920031017.do Here's one of those books in HTML form: http://www.apeth.com/iOSBook/ Behind the scenes, all of that is TextMate and the AsciiDoc bundle, as I explain here: http://www.apeth.net/matt/iosbooktoolchain.html I also gave a talk on this workflow at OSCON 2012 in Portland, OR. One of the nice things about TextMate is that you can modify a bundle easily. I've changed some regexes and added some snippets and keyboard shortcuts to the original AsciiDoc bundle, and I've added a couple of commands (I like to render into my browser, plus it makes a difference whether we're rendering a chapter or a book as a whole). But in general I would have to say that I have been far, far, *far* more nimble and productive with these tools than I would have been in any other way. Indeed, this experience has made me a firm believer in pure text and light markup; I never want to go back to a WYSIWYG editor, not even Frame. I do not understand the part of your question that draws a distinction between TextMate 1 and TextMate 2. The bundle was written for TextMate 1, obviously, but TextMate 2 doesn't break it or anything. I don't see how the bundle would be made to differ significantly for TextMate 2, or what difference TextMate 2 would have to its features. Yes, this bundle is crusty and not terribly well written, but the point is to use TextMate as a nimble writing tool for producing DocBook output, and this bundle lets me do that just fine, as my experience proves beyond the slightest doubt. Feel free to contact me directly via email if you want to talk about my modifications to the bundle, but I assure you they are very minor. I am not a sophisticated bundle writer, and I have no time to play with the bundle if I don't have to; I'm too busy using it to get real work done. m. -- matt neuburg, phd = matt(a)tidbits.com, http://www.apeth.net/matt/ pantes anthropoi tou eidenai oregontai phusei Programming iOS 7! http://shop.oreilly.com/product/0636920031017.do iOS 7 Fundamentals! http://shop.oreilly.com/product/0636920032465.do RubyFrontier! http://www.apeth.com/RubyFrontierDocs/default.html TidBITS, Mac news and reviews since 1990, http://www.tidbits.com

12 years, 3 months

1
0
0 0

Text bundle not working?

by Ross Ahmed

If I highlight ³test test one² , then go to Bundles > Text > Sorting > Sort Selection & Remove Duplicates, all that happens is entire lines becomes highlighted and a new line inserted beneath. Is this an error? Thanks Ross

12 years, 3 months

2
1
0 0

add bookmarks to 'Go to symbal' popup

by Yuan

Allan, Once we talked about adding bookmarks to 'Go to symbal' popup or somewhere, do you have a plan to this? -- Yuan

12 years, 3 months

1
0
0 0

TextMate freezes when lines are super long

by Yi Lin

For my work I often diff dumps of databases, and sometimes those files have super long lines without newline character; for example, an insert statement for millions of record all on a single line. When I open such a file, TextMate generally freezes. It would be nice if TM can handle working with such file efficiently, or at least warn me before trying to open such a file.

12 years, 3 months

3
3
0 0

auto changing theme

by Yuan Jiang

How about to add a feature to auto change theme when day or night comes. Yuan Jiang sleetdrop(a)gmail.com

12 years, 3 months

2
1
0 0

Bundle snippets scope selector -- excluding scope?

by Harald Lapp

hi, i wonder if it's possible to "exclude" scopes using the "scope selector" setting for a snippet. for example: the PHP bundle defines a tab-trigger for "array" that expands to $... = array ... thats fine as long as i am really in the scope "source.php". but when i am writing documentation (phpdoc -- which is in fact "source.php", too) it's really annoying when the 'array' keyword and such get's expanded. i wonder what's the best solution to solve this ... would i have to define a scope "phpdoc" and overwrite the tab-triggers in there or is there any other solution? thanks in advance, harald

12 years, 3 months

4
10
0 0

show in symbol list

by Ross Ahmed

In a .R file, I have a bunch of headers like this: # this is a header ----------------------------------------------------------- How can I get these headers to show in symbol list and fold? I¹ve tried changing the foldingStartMarker/foldingStopMarker line without success, and I cannot find the showInSymbolList line in the R language grammar. Thanks Ross

12 years, 3 months

3
4
0 0

Align code

by Ross Ahmed

Hi all I recently posted asking how to align code at <- . For example, I would want these two lines of code foo <- test fooFooFoo <- test To look like foo <- test fooFooFoo <- test Somebody suggestted installing the align bundle and using the keyboard shortcut CMD + CONTROL + 9. I've trice this but unfortunately it doesn't run and throws a message box saying 'Failure running Align Source'. Can anyone come up with a hacky way of aligning code at <- ? Ross

12 years, 3 months

3
7
0 0

suggestion

by Yvon Thoraval

suppose i want to report a variable state in NodeJS and/or JavaScript, for example: console.log("myvar['"+property+"'] = "+myvar[property]); because I'm a lazy guy, i want only to enter "myvar[property]", apart from console.log. at start, i would enter : console.log(myvar[property]); then copy/paste "myvar[property]" : console.log(myvar[property]myvar[property]); adding " = +": console.log(myvar[property] = myvar[property]); then surrounding "myvar[property] = " by '"': console.log("myvar[property] = "+myvar[property]); i want to see the property value in the "left" hand side, then i sourround "property" by '"': console.log("myvar["property"] = "+myvar[property]); here is my suggestion, could it be possible by selecting "property" to add two "+" signs on each side of "property" in order to make it : console.log("myvar["+property+"] = "+myvar[property]); could that last step be implemanted in TextMate ? -- Yvon(a)48.871651804,2.384858688

12 years, 3 months

2
2
0 0

Align asignments

by Ingo Lantschner

Just found this exciting tip in the November archive: > or install the bundle from > https://github.com/tbates/align.tmbundle Works great at least with Perl-code - thanks!!

12 years, 3 months

1
0
0 0

"Find in open files" not available + Associate file type

by Rasmus Malver

Hi all, When trying to search a folder of .nib-files, I ran into a few problems. The files are nicely displayed in TextMate, but I cannot search the contents of the files. Whilst trying to work around it, I ran into two problems: 1. *Find > In > Open Files not available* I opened the lot to use Find > In > Open Files, but this option is unavailable. Screenshot below. I tried opening .txt-files, and I tried creating new files, but it remains unavailable. Is this function available to anybody? 2. *Add file-type to TextMate* To facilitate the opening of said files in Finder's context menu (open with), and to encourage TextMate to search their contents, I tried to associate them with TextMate. I failed. First I tried to add them via TextMate.app\Contents\Info.plist. This invalidated TextMate's code signing, and thus broke its connection with /Keychain Access/. Nor did it have the desired effect. Thus I reverted my actions, and tried to associate the file type via the bundle editor. I added "nib" to the Property List bundle, old style language grammar file types, reset the launch services database regarding TextMate and killed Finder. /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/LaunchServices.framework/Versions/A/Support/lsregister -f /Applications/TextMate.app/;killall Finder; No luck. TextMate still does not appear in "open with", and TextMate still refuses to search their contents. Does anyone have a tip on how to achieve this? By the way, to search the .nib-files, I renamed them to .txt, and chose Find in Folder. That worked. But it's a long way round. Thanks, Rasmus Malver TextMate Find in Open Files not available

12 years, 3 months

2
1
0 0

adding a file icon

by Yvon Thoraval

Recently, I've added the Dart.tmbundle to TextMate 2. It works OK however I'd like adding a "Dart_file.icns" in order to get the right icon. I've added some lines in the Info.plist of TextMate 2, the Icon file into the Resources directory but nothing change. Then, what is the correct way to add a file icon into TextMate 2 ? Also, using applescript, i've found the identifier for *.dart files, it is part of archive file one terminating by -dart, strange... Before any trick the file icon was of a dmg one... -- Yvon(a)48.871651804,2.384858688

12 years, 3 months

2
2
0 0

Language definition problem

by Gerd Knops

Hi, I am experimenting with embedding properties in Objective-C implementations that will be parsed out and placed into a header file, and that also include documentation. They are supposed to look like this: /*@property BOOL testProperty; Sample Property # Discussion This is documentation in Markdown syntax */ My custom Objective-C language definition includes this pattern: { name = 'meta.property.objc.embedded'; begin = '^(/\*)(?=\@property)'; end = '\*/'; beginCaptures = { 0 = { name = 'meta.comment.embedded-property.start'; }; }; endCaptures = { 0 = { name = 'meta.comment.embedded-property.end'; }; }; contentName = 'meta.scope.property.objc.embedded'; patterns = ( { name = 'meta.scope.property.def.objc.embedded'; begin = '(?=\@property)'; end = ';\s*\n?'; patterns = ( { include = 'source.objc#interface_innards'; } ); }, { name = 'meta.scope.property.doc.objc.embedded'; begin = '^'; end = '$\n'; // patterns = ( { include = 'text.html.markdown'; } ); }, ); }, That works fine, the /* and */ have the proper start/end scope, the documentation part has the doc scope etc. But as soon as I enabled the uncommented line that is supposed to highlight the embedded documentation with markdown, markdown gobbles up the end markers. Shouldn't the outer pattern prevent this? And if not, how can I make this work? Thanks Gerd

12 years, 3 months

2
1
0 0

Annoying bug, restoring window from zoom after relaunching TM2

by Adam Strzelecki

There’s pretty annoying bug in TM2 regarding remembering default window frame. (1) Launch TM2 (2) Open new document & maximize window via (+) (3) Quit TM2 (4) Open it again (5) Open new document, it should be zoomed/maximized (6) Restore it via (+) Poof… where did it go? It is here in lower left corner of the screen with 0 content height :~( Can we have make TM2 remember regular window frame (not zoomed) and if window was zoomed? Cheers, -- Adam

12 years, 3 months

1
0
0 0

Re: Projects in TM2: simple include/exclude directories

by Max Lein

On 27.11.2013, at 06:11 , Owen Densmore wrote: > My home folder has many folders, many of which I'd like to have be in > multi-folder projects. So ~/bin and ~/notes are a pair, while a second > pair are ~/bank (receipts) and ~/config (a collection of configuration > files used elsewhere) > > If I understand correctly, I'd have to have a .tm_properties file for each > pair, not possible given the file hierarchy style of projects You'd want to have a .tm_properties file in you user directory which sets the defaults. Then in many cases, you don't need to create a per-»project« .tm_properties file. The .tm_properties files in nested directories apply in addition to defaults. For instance, you probably want to use different include/exclude rules in the directory where you're writing code for a numerical simulation than in the directory where you write the article in LaTeX with the associated findings. Allen made a conscious design decision to abandon project files and base the idea of projects just on filesystem hierarchy. In some ways, that makes TextMate 2 more powerful than TextMate 1.x, but other things (especially working with scattered files) has become more complicated because a folder is a »single project«. Personally, I haven't found a good way to recreate my TextMate 1.x workflow in TextMate 2 (symlinks don't mesh well with my LaTeX code and my git repositories). You probably have to adapt the way you organize your work. I have created a sensible master .tm_properties file and since I essentially only work with TeX-related files, shell scripts and markdown files, I don't really need to change them. Instead of symlinking, I just copy files and keep them in sync by hand if need be. Max

12 years, 3 months

1
0
0 0

Projects in TM2: simple include/exclude directories

by Owen Densmore

Thanks for the help! > On Mon, Nov 25, 2013 at 2:52 AM, backspaces wrote: > > First, each folder would need their own .tm_properties files. This > means if > > the same folder is in multiple projects, you have no exclude/include > files > > capabilities for the multiple projects. Each project would have to have > the > > same contents, according to their folders' .tm_properties file. > The folder being included in multiple projects does not require its > own .tm_properties file. > Each project folder can have its own .tm_properties file with its > own configuration, but note that, as Allan said, symbolic links to > folders are currently not expanded. > Is "project folder" different from any other, other than the .tm_properties and the fact that it is a folder rather than a file? Not sure if this makes sense in your context but maybe you can try > changing your workflow and treating your shared folder as a project on > its own (having its own window open along other projects, etc). I > have a couple projects that depend on other projects and I work this > way in order to have Go To File and searching capabilities in the > subprojects. OK, sounds reasonable. > > Second, lets presume my project starts in my home directory. Then I can > > have only one project there, specified by the .tm_properties file, which > > would have to include my multiple folders. Thus my home directory can be > a > > project folder for only a single project. (Yikes!) > Just curious: why would you want your home folder to be a project > folder? One usually wants the home folder to have one or more project > folders inside. I have a folder for each project and all of them are > in a Developer folder in my home folder. My home folder has many folders, many of which I'd like to have be in multi-folder projects. So ~/bin and ~/notes are a pair, while a second pair are ~/bank (receipts) and ~/config (a collection of configuration files used elsewhere) If I understand correctly, I'd have to have a .tm_properties file for each pair, not possible given the file hierarchy style of projects > Third, a work around would be to simply have a separate folder per > project, > > containing symbolic links (ln -s) to the folders I want in my project. > This is not a workaround, this is the expected way to handle projects. A-ha! OK, so I can make a TM folder that contains a folder for each of my TM projects, each of which in turn have symlinks to my actual folders? That fixes everything. > Sorry: one last question: I'd like my projects to be double-clickable to > open > > them. Can I do that? Interesting, I'll look into that. Thanks! > I know this can be done by using the Favorites feature. From Mate's > drawer, you can navigate then right click a folder and add it to > favorites, and all your favorites are available from the heart icon in > the bottom right, or from File, Open Favorites... . > Hope that helps, > -- > :: dip > -- Thanks for the help, I appreciate the time & effort. -- Owen

12 years, 3 months

3
2
0 0

Go to project folder has stopped working?

by Jacob Carlborg

For me, go to project folder has stopped working. Anyone else having this problem? -- /Jacob Carlborg

12 years, 3 months

3
7
0 0

2026

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

TextMate