- TextMate - lists.macromates.com

by Rasmus Malver

Hi everybody! I'm trying to make an enhanced paste-function which evaluates the text pasted into a blank textmate document, and assigns the document's language accordingly. Is there a non-AppleScript way of assigning language? It is very lacking in text examination, so it would be much less clumsy in, say, bash. I know I can use this.: keystroke "h" using {control down, option down, shift down} keystroke "1" To set the syntax as HTML by “faking” the keyboard shortcut. Thanks! Rasmus

10 years, 11 months

2
1
0 0

Single selection command that returns multiple selections?

by Graham P Heath

Hiya, Is it possible for a bundle command to accept a single selection and return multiple selections (or just carets)? Here’s an example (brackets indicate selection, | is a caret ); Stage 1: state: …class="|dark-theme"… action: select "dark-theme" Stage 2: state: …class="[dark-theme]"… action: [Hypothetical caret split command] Stage 3a: state: …class="[dark]-[theme]"… or Stage 3b: state: …class="|dark-|theme"… Then I’d press command T to switch from "dark-theme" to "theme-dark". Im not sure what the logic would be in the bundle, my use would be served by simply returning the caret at the beginning and end of my selection (then command + w to select the word). I’m also curious how Filter Through Command’s behavior could be reproduced in a bundle command, where the commands results are distributed to each line. Thanks everyone! Graham P Heath ps: I’ve got some serious love for multiple carets ♥️♥️♥️

10 years, 11 months

2
3
0 0

Filetype detection in v2

by Tom Smyth

This document doesn't quite seem right anymore: http://blog.macromates.com/2007/file-type-detection-rspec-rails/ I checked my manual bindings and ruby is not in there, yet my RSpec first line match isn't working. Does anyone know how to fix this for version 2? Thanks -- Tom Smyth Worker-Owner, Sassafras Tech Collective Specializing in innovative, usable tech for social change sassafras.coop *·* @sassafrastech Resident, Touchstone Cohousing touchstonecohousing.org

10 years, 11 months

2
1
0 0

Can't get text mate to work in terminal

by Brad Hutchins

Can't get text mate to work in terminal. Says “mate” command is not found. I created the symbolic link and update .profile and .bash_profile. Both are included. Even rebooted.

10 years, 11 months

2
2
0 0

Sparkle statistics

by Jakub Suder

Hi, I wrote a web app in Rails for collecting system statistics from Sparkle, I figured you might be interested in using it for Textmate since you also use Sparkle for updates. It's self-hosted, so you need a server and some basic admin skills. Here's the project: https://github.com/mackuba/sparkler And here's what kind of statistics it can generate: http://sparkle.psionides.eu/feeds/gitifier/statistics (this is data from 4 years back as you can see, so it will take a while for it to look like this :) Let me know if you decide to use it and manage to set it up, I'll link to you from the readme. Also let me know if you run into any problems, I don't know if those instructions are intuitive enough. Kuba

10 years, 11 months

1
0
0 0

Code folding in LaTeX

by Ross Ahmed

Code folding in LaTeX is not doing what I expect. Lets say I have this in my .tex file: \begin{document} \section{} Lorem ipsum dolor sit amet, consectetur adipisicing elit. \subsection{} Lorem ipsum dolor sit amet, consectetur adipisicing elit. \end{document} Option + Command + 0 does as expected: \begin{document}\end{document} Option + Command + 1 does exactly the same: \begin{document}\end{document} But what I expected was \begin{document} \section{} \end{document} Option + Command + 2 does as expected: \begin{document} \section{} \subsection{} \end{document} So, I expected: \begin{document} to be all levels \section{} to be level 1 \subsection{} to be level 2 Is there a way of setting cold folding to do what I expected? Ross Ahmed Ecologist 07875533906 Twitter: @RossAhmed <https://twitter.com/RossAhmed> LinkedIn: Ross Ahmed <https://www.linkedin.com/pub/ross-ahmed/2a/775/590>

10 years, 11 months

2
1
0 0

Colorize -- General-purpose Color Scheme Editor

by Bastien Dejean

Hi, It can, in particular, import and export TextMate themes: https://www.colorize.io/baskerville/YNVK893Q https://www.colorize.io/baskerville/NKQYYVE6 https://www.colorize.io/baskerville/S1D14K4V https://www.colorize.io/baskerville/54VNN8JZ Greetings, -- b.d (| |) ^ ^

10 years, 11 months

1
0
0 0

Hide LaTeX package list

by Ross Ahmed

In my .tex file, I have 60 lines of code between the start of the file and \begin{document}. Most of these lines are filled with \usepackage{}. Is there a way to hide this part of the .tex file in TextMate, by for example using code folding? If not, can these 60 lines be sourced from a different .tex file? Ross Ahmed Ecologist 07875533906 Twitter: @RossAhmed <https://twitter.com/RossAhmed> LinkedIn: Ross Ahmed <https://www.linkedin.com/pub/ross-ahmed/2a/775/590>

10 years, 11 months

2
2
0 0

subversion.tmbundle and yosemite

by Umberto De Giovannini

Dear All, the subversion bundle (and all the ruby bundles) are broken since I update to yosemite few weeks ago. I have been trying to fix the problem but I had little luck so far. For what I understand is a problem related with the wrong default ruby version in yosemite (2.0 instead of the bundle supported 1.8). A typical error that I get is something like, e.g. for svn status: /Library/Ruby/Site/2.0.0/rubygems/core_ext/kernel_require.rb:54:in `require': /Users/umbe/Library/Application Support/TextMate/Managed/Bundles/Bundle Support.tmbundle/Support/shared/lib/shelltokenize.rb:74: invalid multibyte escape: /[^\w_\-\+=\/\x7F-\xFF]/ [...] For what I understand each bundle should run ruby thought the ruby18 script which should install the the 1.8 version int he bundle support if it can’t find ii installed on the system. Unfortunately this seems not to be the case. I have tried a bunch of things but without much success. I have installed ruby 1.8.7 with rvm and defined the TM_RUBY variable to point at it but nothing happened (later I realized that TM_RUBY is not meant for bundles). I have reset the textmate 2 prefereces chance and variables in the hope to stimulate ruby18 to do its job but with no success. Do you have any suggestion on how to fix is or at least help me in the debug process (I find a bit complicated to figure what a bundle is doing)? Thanks Umberto

10 years, 11 months

2
5
0 0

Memory leak?

by Edward K. Chew

Is there a memory leak in TextMate? I was running Activity Monitor and saw a memory usage spike. The application also became unresponsive, so I sampled it before doing a force quit. Here's what it came back with: Not sure if it's relevant, but I was using a custom assembly language bundle at the time. The odd thing is I don't think TextMate was even the active application at the time the memory spiked. Very weird. Ted

10 years, 11 months

4
5
0 0

Calling CodeKit With AppleScript

by Robert J. Rockefeller

I’m trying to create a command using AppleScript to open CodeKit and select the CodeKit project associated with the current TextMate 2 project. CodeKit’s docs want this: tell application "CodeKit" to select project containing path "~/clients/aProject/app.scss” So I wrote this: #!/bin/bash [[ -f "${TM_SUPPORT_PATH}/lib/bash_init.sh" ]] && . "${TM_SUPPORT_PATH}/lib/bash_init.sh" osascript <<EOF tell application "CodeKit" to select project containing path "$TM_PROJECT_DIRECTORY" EOF That launches CodeKit but does not select the project; CodeKit opens to the last used project, not $TM_PROJECT_DIRECTORY. I’ve tried both “TM_PROJECT_DIRECTORY” and "’$TM_PROJECT_DIRECTORY’”. What did I get wrong? Bob ------------------- Robert J. Rockefeller Richmond Hill, GA www.bobrockefeller.com

10 years, 11 months

3
3
0 0

TM2 Reorder Menu Actions in Bundle Editor

by John Joyce

In TM 2, Bundle Editor, How can you change the order of Menu Action items in the Bundle Editor. How can you add separators (for menu separator item)

10 years, 11 months

5
7
0 0

exclude & include in .tm_properties

by dvlogic

Is there a way to swap the include* / exclude* property order in TM2? I have a project that is comprised of shared code used by many different projects. Every time another developer adds files and directories to their area of the source tree I have to add another exclude value in my .tm_properties. Ideally I would like to exclude everything and only include the directories and files that are specific to what I'm working on. Reading the TM docs, it appears that the order is first to parse the "include*" (which defaults to everything) then parse the "exclude*." Because of this I can't figure how to, by default, exclude everything and only include what I'm interested in. Thanks for any help. -- DV -- View this message in context: http://textmate.1073791.n5.nabble.com/exclude-include-in-tm-properties-tp29… Sent from the textmate users mailing list archive at Nabble.com.

10 years, 11 months

3
6
0 0

Ordering in language grammar

by Jacob Carlborg

I'm trying to match the following code in the D language grammar: static if (true) {} void foo () { static if (true) {} } The first static-if is correctly recognized as "keyword.control.conditional.d". But the static-if inside "foo" is recognized as a method "meta.definition.method.d". I managed to get the top level static-if correctly recognized by moving the pattern for the static-if before the pattern for a method. But I don't understand why that doesn't work inside "foo". The full scope of the static-if inside "foo" is: source.d meta.block.d meta.definition.method.d entity.name.function.d The language grammar is available here [1]. Are the patterns evaluated in the wrong order or something like that? Another thing I noticed is the "static if" on the top level seems to be recognized as a single word. When I use the hot keys for moving the cursor a word it jumps from the start of "static" to the end of "if", instead of to the end of "static". [1] https://github.com/jacob-carlborg/d.tmbundle/blob/d2/Syntaxes/D.tmLanguage#… -- /Jacob Carlborg

10 years, 11 months

2
2
0 0

error: thread-local storage is not supported for the current target

by Jacob Carlborg

I'm trying to build TextMate and suddenly got this error: [235/1222] Compile ‘Frameworks/crash/src/info.cc’… FAILED: xcrun clang++ -include build/Shared/PCH/prelude.cc -c -pipe -fPIC -gdwarf-2 -m64 -mmacosx-version-min=10.7 -funsigned-char -D'NULL_STR="\uFFFF"' -DREST_API='"https://api.textmate.org"' -Wall -Wwrite-strings -Wformat -Winit-self -Wmissing-include-dirs -Wno-parentheses -Wno-sign-compare -Wno-switch -IShared/include -fcolor-diagnostics -DNDEBUG -Os -fvisibility=hidden -std=c++1y -stdlib=libc++ -I"/usr/local/include" -o build/Frameworks/crash/src/info.o -MMD -MF build/Frameworks/crash/src/info.o.d -Ibuild/include Frameworks/crash/src/info.cc Frameworks/crash/src/info.cc:61:3: error: thread-local storage is not supported for the current target thread_local stack_t stack; I have successfully compiled TextMate before and have not seen this error. info.cc has not been updated since April last year, I'm pretty certain I've compiled TextMate after that. Could this be related to my recent upgrade to OS X 10.10.3? I have Xcode Version 6.3 (6D570) and Clang: Apple LLVM version 6.1.0 (clang-602.0.49) (based on LLVM 3.6.0svn) Target: x86_64-apple-darwin14.3.0 Thread model: posix BTW, both "__thread" and "_Thread_local" works fine. -- /Jacob Carlborg

10 years, 11 months

2
2
0 0

Find and Replace with RegExes

by John Joyce

Multiple find-and-replace with Regexes, stepping through each one by one, the last one can be overstepped and insert the replacement tokens themselves (such as $1 $3) Thanks, John Joyce

10 years, 11 months

2
1
0 0

TM2 Ruby Multi-line comments folding is slightly broken

by John Joyce

Hi all, I noticed code folding in TM2 in Ruby is slightly broken with multiline comments (using the =begin … =end construct) Newlines within the comment introduce a new folding start. Thanks, John Joyce

10 years, 11 months

2
1
0 0

Any way to step backwards when selecting words?

by Tom Smyth

When using ^W to select the next instance of a word, is there anyway to step backwards if you go too far? In Sublime I think you just add a shift to the key combo and it does this. It sucks to be well into a nice fat multiple selection only to go a bit too far and have to start over again. Thoughts? PS. I love TM! -- Tom Smyth Worker-Owner, Sassafras Tech Collective Specializing in innovative, usable tech for social change sassafras.coop *·* @sassafrastech Resident, Touchstone Cohousing touchstonecohousing.org

11 years

2
2
0 0

How do I create a new command in a bundle?

by jgalt

I am trying to follow these instructions and I do not understand how to create a new command. Can someone please explain how this is done? https://coderwall.com/p/j7qqsa/minify-your-css-inside-of-textmate In your Bundles menu, go to Edit Bundles and select your favorite CSS Bundle (I am personally a huge proponent of mCss <http://minimaldesign.net/downloads/tools/textmate-css-bundle> ). Add a new Command, and enter make the command contents the following code: # Create the minified filename NEWFILE=${TM_FILENAME%\.css}'.min.css' # Minify into that file curl -X POST -s --data-urlencode "input@${TM_FILENAME}" \ http://www.cssminifier.com/raw > $NEWFILE # And open it mate $NEWFILE You can make your key equivalent anything you'd like, I set mine to Cmd + Shift + R. Once you have done this, give it a whirl. You should see that your styles.css generates a styles.min.css in the same directory, as well as opens it in Textmate. To note: if you don't have the Textmate command line utility installed, simply delete the last line of this command to stop seeing errors.

11 years

3
2
0 0

Failure running “Typeset & View (PDF)”.

by Christof Janssen

Hello The title says it all. I am running Textmate 2 (just reinstalled after deleting ~/Library/Application Support/Avian, ~/Library/Application Support/Textmate folders) on the latest version of Yosemite and get the above error using the Latex bundle. The message then reads : Command returned status code 1. Upon editing the command, I get ---snip--- #!/usr/bin/env ruby18 # coding: utf-8 require ENV["TM_SUPPORT_PATH"] + "/lib/tm/process" require ENV["TM_SUPPORT_PATH"] + "/lib/tm/htmloutput" require ENV["TM_SUPPORT_PATH"] + "/lib/tm/save_current_document" # To enable the typesetting of unsaved documents, you must change the “Save” setting of # this command to “Current File” and add the variable TM_LATEX_AUTOSAVE to TextMate's # Shell Variables preferences. Be warned that your document must be encoded as UTF-8 if # you excercise this option — becauseTextMate.save_current_document cannot know the file # encoding you prefer. TextMate.save_current_document unless ENV["TM_LATEX_AUTOSAVE"].nil? texmate = ENV["TM_BUNDLE_SUPPORT"] + "/bin/texmate.py" engine_version = TextMate::Process.run(texmate, "version") TextMate::HTMLOutput.show(:title => "Typesetting “#{ENV["TM_DISPLAYNAME"] || File.basename(ENV["TM_FILEPATH"])}”…", :sub_title => engine_version) do |io| TextMate::Process.run(texmate, 'latex', :interactive_input => false) do |line| io << line end end ::Process.exit($?.exitstatus || 0) # exitstatus is nil if our process is prematurely terminated (SIGINT) -- snip -- Unfortunately, I am not very good with shell commands. Can anyone offer help ? Christof

11 years

2
4
0 0

Python Annotations Syntax Highlighting

by Leandro Pereira de Lima e Silva

Hello! Python3 is on track to getting type hints through annotations in functions, which TextMate doesn't recognize. I've tried to modify the current regex to recognize this new piece of notation but I'm not that well versed enough in regex. Maybe someone more experienced with it could do it? Here are the references for it: - https://www.python.org/dev/peps/pep-3107/ - https://www.python.org/dev/peps/pep-0484/ Cheers, Leandro

11 years

1
0
0 0

Desactivate the automatic replacement of some characters to html entities

by Joël Brogniart

Hi, Is there a way to desactivate the automatic replacement of some characters to html entities, ie when I type option-space in an html or markdown doc, it is automaticaly replaced with   I'd like to keep the character I typed as is as it make the text more readable (I mainly have international text with lot of non ascii chars) and most html entities are not necessary in html5. Regards, Joël

11 years

2
2
0 0

WakaTime

by Keith Solomon

Has anyone tried integrating the WakaTime (https://wakatime.com) time tracking service into TextMate? I'd love to be able to track my time using this, but there's no"official" plugin for it for TexMate. -- Keith Solomon - ksolomon(a)gmail.com My Blog - http://keithsolomon.net/

11 years

8
10
0 0

TM_LATEX_MASTER

by svsdiscussion＠gmail.com

I am experiencing an erratic behaviour with the TM2/Latex.tmbundle. It seems that TM2 is recording the TM_LATEX_MASTER variable between sessions. I was working in a folder foofoolder1 where in the .tm_properties I had defined TM_LATEX_MASTER = foo1.tex Then I closed TM2 and created another file, foo2.tex, in another directory foofolder2 unrelated to foofolder1. In this new folder, I didn't define TM_LATEX_MASTER. For my surprise, where I pressed Command + R, TM2 was invoking foo1.tex. So it was using the TM_LATEX_MASTER defined for the other folder in this new folder. How to fix it? -- View this message in context: http://textmate.1073791.n5.nabble.com/TM-LATEX-MASTER-tp29089.html Sent from the textmate users mailing list archive at Nabble.com.

11 years

2
3
0 0

latex bundle - folding sections/subsections

by chrd

hello, I am new here. I have noticed a problem in the folding mechanism of code when using the LaTeX-bundle in textmate (version: TextMate version 2.0-beta.7.1 ). I use textmate only for writing LaTeX documents. so, I have now idea if this is caused by textmate or specifically by the latex-bundle. most section{} or subsection{} commands are "foldable", i.e. the little triangle symbol appears next to the line number. however, the triangle disappears when I include another command in the same line. this happens for example, when the section heading contains italics. section{heading of this section} --> this will produce foldable code. section{heading of textit{this} section} --> this will fail to produce foldable code. I would like to ask if this is a known problem and if anyone has a solution to this? thank you in advance, christian

11 years

2
4
0 0

Jump to line in PDF from source R file

by Ross Ahmed

In R you can use Sweave or Knitr to convert a LaTeX file with embedded R code, into a PDF. The RStudio website describe hows you can jump from a line in the source R file to the corresponding line in the PDF file: https://www.rstudio.org/ide/docs/authoring/pdf_preview Is this possible with TextMate? Ross Ahmed Ecologist 07875533906 Twitter: @RossAhmed <https://twitter.com/RossAhmed> LinkedIn: Ross Ahmed <https://www.linkedin.com/pub/ross-ahmed/2a/775/590>

11 years

2
1
0 0

LaTeX jump to line in PDF viewer error

by Ross Ahmed

If I run the command Bundles > LaTeX > Jump to Current Line in Viewer, I get a dialogue box that contains this error: Failure running ³Jump to Current Line in Viewer². usage: texMate.py sync [-h] [filepath] texMate.py sync: error: argument filepath: No such file or directory: 1 What causing this error and how can I solve it? Ross Ahmed Ecologist 07875533906 Twitter: @RossAhmed <https://twitter.com/RossAhmed> LinkedIn: Ross Ahmed <https://www.linkedin.com/pub/ross-ahmed/2a/775/590>

11 years

2
1
0 0

LaTeX users: best practice for changing \label

by Ross Ahmed

In my .tex file, I have section titles and labels like this: \section{My section title} \label{sec:my_section_title} I can then cross-reference this section in my text like this: Lorem ipsum dolor sit amet \ref{my_section_title} I'm frequently changing my section titles to something very different different which forces me to change my labels and cross references. This can becomes tedious when my cross references are scattered through a long document. What is the best way of changing labels in which the cross references are scattered through long development? Is there any way to automate the process? Ross Ahmed Ecologist -- 07875533906 Twitter: @RossAhmed LinkedIn: Ross Ahmed

11 years

3
2
0 0

latex_watch.pl modification?

by Zvi Biener

Hi TextMaters, I have a very superficial knowledge of perl, so I wonder if someone can help. Setup: before I compile my LaTeX document, I need to run a shell script (using sed) to find/replace certain strings. [There is a long story for why I need to do this, and why its not easily avoidable.] Possible solution: I was wondering if I can insert something in the latex_watch.pl script that would run this shell script, without causing latex_watch to go into an infinite loop (since the shell script changes the underlying LaTeX file/s). I've tried inserting the relevant code in several locations, but I can't seem to avoid the loop. That's not surprising, since I don't really know perl. Does anyone know if there is easy way to 1) modify latex_watch.pl so it executes a shell script that modifies the underlying LaTeX file without going in to a loop? or 2) cause the shell script to run on the file whenever the file changes by some other means? Thanks! Zvi

11 years

2
2
0 0

Case-sensitive citations in LaTeX bundle

by Gildas Hamel

I have a request regarding citations based on current word or Ref-TeX style: is it possible to make them non-case sensitive? When I search by author's name, which is most of the time, I know that the first letter of the word needs to be in uppercase and so I type it that way. But if I'm searching by title words, say for a word like "apocalypse", I am not sure I should type a truncated "Apocal" or "apocal". My bib files contain titles with first letters in upper- and lowercase. It would be great to be able to do a case insensitive search. --Gildas

11 years

2
2
0 0

Language grammar, matching multiple lines

by Jacob Carlborg

I have this piece of language grammar to match a struct in D : begin = '(?x)^\s* ((?:\b(public|private|protected|static|final|synchronized|abstract|export|shared)\b\s*)*) # modifier (struct)\s+ (\w+)\s* # identifier (?:$\s*([^$]+)\s*\)|)\s* # Template type (if\s*$\s*([^$]+)\s*\)|)?\s* # Template constraint '; end = '(?={|;)'; It will match this code, as an example: struct Foo(A) if (true) { } The problem is if I put the "if" on a new line it won't match. How can I make the rule match across several lines? -- /Jacob Carlborg

11 years

2
4
0 0

Re: Latex command fail following new security update

by Geoff Vallis

I've tried 'latex and view' again and it does now start up faster than I remember! Thanks for the great work, Geoff >> On 24 Mar 2015, at 13:32 , Geoff Vallis <gkvallis(a)gmail.com> wrote: >> >> Hi Ren, >> >> Your fix did the trick, thanks very much. >> >> The reasons I don't use 'typeset and view' are twofold. The main one is just that it is a bit slow - I have to wait almost five seconds before it actually starts to typeset, which may not seem very long but when I am 'debugging' it is a little frustrating. Using a terminal window the typesetting starts instantly. > > Commit 39b09967 [1] should improve the startup time of `texmate` significantly. > > [1]: https://github.com/textmate/latex.tmbundle/commit/39b09967 > > I get an overhead of less than 0.3s if I use `texmate` on a minimal file. The translation of the minimal file inside Terminal using the command `time pdflatex tmp.tex` takes 0.55s. The following command ? basically simulating a run of ?Typeset & View (PDF)? ? inside TextMate takes about 0.79s: > > ? > #!/usr/bin/env bash > > BUNDLE_DIR="$HOME/Library/Application Support/Avian/Bundles/LaTeX.tmbundle" > TM_BUNDLE_DIR="$HOME/Library/Application Support/TextMate/Managed/Bundles" > > export TM_FILEPATH="tmp.tex" > export TM_SUPPORT_PATH="$TM_BUNDLE_DIR/Bundle Support.tmbundle/Support/shared" > export TM_BUNDLE_SUPPORT="$BUNDLE_DIR/Support" > export PATH="$BUNDLE_DIR/Support/bin":$PATH > export TM_SELECTION='1:1' > > texmate.py -suppressview latex -latexmk no -engine pdflatex > ? > > tmp.tex: > ? > \documentclass{article} > > \begin{document} > Bla > \end{document} > ? > > Could you maybe test the above example and send in your results. If it takes multiples seconds before `texmate` starts typesetting, then maybe your local copy of the bundle does not contain the changes done in commit 5074427f [2]? > > [2]: https://github.com/textmate/latex.tmbundle/commit/5074427f > >> The second reason is that I can go back and forth between xelatex and pdflatex easily by setting up two scripts with different keyboard shortcuts, which I find quite convenient. > > You can change the typesetting engine used by ?Typeset & View (PDF)? with the following commands: > > defaults write com.macromates.textmate.preview latexEngine xelatex > defaults write com.macromates.textmate.preview latexEngine pdflatex > >> I know there are some advantages to 'typeset and view' and if it were a bit quicker, like the equivalent command in TexShop which is quite fast, I would use it. > > Hopefully the latest changes help. > >> Thanks again >> Geoff > > Kind regards, > Ren? >

11 years

1
0
0 0

How can I add a sequencial number to this Find/Replace?

by jgaltUSA

I am a newbie to textmate and I am trying to perform a find and replace. I want to replace the matched text with a sequential number. Here is my current replacement string: $1##$2 How can I replace the ## with a sequential number? For example, I want the first sequential number to be 16. Here is a screen capture: <http://textmate.1073791.n5.nabble.com/file/n28976/16562519926_345a547ff1_o.…> Thanks! -- View this message in context: http://textmate.1073791.n5.nabble.com/How-can-I-add-a-sequencial-number-to-… Sent from the textmate users mailing list archive at Nabble.com.

11 years

5
13
0 0

LaTeX bundle Current Word and Ref-TeX citation commands

by Gildas Hamel

Dear René, The new citation command based on current word or Ref-TeX style is working well. I use both and wonder how to tailor them for my use, now that I realized that I had to throw out my ~/Library/Application\ Support/Avian previous tweakings of the two commands (they called LaTeXUtils.rb): 1. Citation based on current word gives results such as: \cite{Bellah:1996kx}. I would like to get \cite[]{Bellah:1996kx}, with the cursor in the square brackets so I can enter pages, and then tab the cursor after the citation. 2. My own use of the tweaked Citation Ref-TeX style gave me the choice of \cite[]{}, \textcite[]{}, \footcite[]{}, \autocite[]{} formats. I don't use any other cite formats and would rather have this small list for my case. How do I adapt the new commands to my situation? --Gildas

11 years

2
2
0 0

Latex command fail following new security update

by Geoff Vallis

Hello, I have just installed the latest security update on my Mac (10.10.2) and some commands in my latex bundle were broken by it. For example, I have a script (below) that opens a terminal window and typesets the master file, but after the security update the command no longer tries to typeset the master file, but the subfile, and hence typesetting fails. I am sure is is the Mac OS security update that led to the failure, because I tried on two Macs with the same behaviour. Thanks for any help you may offer Geoff -------- #!/usr/bin/env bash [[ -f "${TM_SUPPORT_PATH}/lib/bash_init.sh" ]] && . "${TM_SUPPORT_PATH}/lib/bash_init.sh" TM_LATEX_MASTER=`${TM_RUBY:-ruby} <<"RUBY" require "#{ENV['TM_SUPPORT_PATH']}/lib/escape.rb" require "#{ENV['TM_BUNDLE_SUPPORT']}/lib/LaTeXUtils.rb" master = LaTeX.master(ENV['TM_LATEX_MASTER'] || ENV['TM_FILEPATH']) puts master RUBY` FILE=${TM_LATEX_MASTER:-$TM_FILEPATH} cd ${TM_DIRECTORY} open -a iterm /Users/gkv/scripts/iterm "time /usr/texbin/pdflatex -synctex=1 ${FILE%.tex}" --------

11 years

2
3
0 0

Re: Select no files in browser?

by Jonathan Monahan

Thanks Allan - works perfectly as it did in TM 1. Cheers, Jonathan.

11 years, 1 month

1
0
0 0

Watch Document in TeX project with multiple documents

by Gildas Hamel

The Watch Document command (Cmd-Ctrl-W) in the LaTeX bundle works beautifully either for a single TeX document or for a series of documents if started from the master file. Is it possible to tweak Watch Document so it can be called from any of these sub-files that are linked to the master? --Gildas

11 years, 1 month

2
1
0 0

Xcode like auto completion

by Sam Scherer

As useful as the escape key is, it would be nice to have visual feedback for auto completion. What would it take to build this? I think Xcode does it best, but I have seen a few fledgeling editors like Textastic and Chocolat implement basic auto complete quite well in the early stages. Thanks -Sam

11 years, 1 month

5
4
0 0

Takana support for TextMate 2?

by Joseph Dan

(I am sending this again as plain text email. Sorry about the earlier HTML email.) This is all the rage these days: http://usetakana.com It's a relatively new tool from mid-2014 it seems. Live SCSS (SASS) editing with on the fly updates, and it's FAST since it happens via JavaScript in the browser and a server running in the background. Can this be implemented in TM2? It's currently only for Sublime Text. Problem is, I'm not a big fan of that editor. I'm forced to use it for this purpose only. If i could do this same thing in TM2 life would become fun again.

11 years, 1 month

5
5
0 0

Re: Select no files in browser?

by Jonathan Monahan

Hi, Further to Andrew Jaffe’s message a couple of weeks ago, I’ve noticed since TM2 that⇧⌘A doesn’t work as well for Subversion as it did in TM1, or at least that Subversion Update doesn’t seem to work as expected if you⇧⌘A before it. In TM1 ⇧⌘A followed by ⌘Y Subversion Update would perform a full project update from the root directory. In TM2 it reports success, but never updates anything. In fact you have to select the project root directory, which I do by click on the project folder (top-left) and selecting the parent folder, followed by clicking on the project folder again to select it from the list. Then ⌘Y Update works fine. Am I being stupid or should ⇧⌘A, ⌘Y Update work as expected? Cheers, Jonathan Monahan

11 years, 1 month

2
1
0 0

Request Jade bundle by default

by Carlos Montalvo

Will be able to add this bundle default https://github.com/jameswomack/Stylus-TextMate-Bundle https://github.com/miksago/jade-tmbundle -- Carlos Montalvo

11 years, 1 month

2
1
0 0

Re: File browser shows no files

by Julien Hugonnier

On 8 Mar 2015, at 19:42, Julien Hugonnier wrote: > Hi: Just a quick question: I have now updated to T2 and found that > whatever I do the file browser does not show any files! Has someone > also encountered that problem and maybe found a solution. >Most times this comes up, it is related to having edited the >include/exclude patterns. >A quick test is to move the focus to the file browser, then use ⌥⌘I >(View → Show Invisible Files), this disables the custom filtering of >item, and if it makes your files show up, then it’s a configuration >problem. >These patterns can either be set via .tm_properties or in the >Preferences → Project → Exclude/Include Files Matching text fields. Thanks for your answer! Doing this indeed shows all the files in the browser but the settings I have are default (I modified neither the preferences nor the tm_properties file) so I am not exactly sure what to do for the browser to work without having to this manipulation each time I start TM2. Any help greatly appreciated.

11 years, 1 month

2
1
0 0

Python Command + R

by svsdiscussion＠gmail.com

I have the following python script: import os os.system("which python") When I execute with command + R I get: /usr/bin/python On the other hand, when I execute with command + shift + R I get: /opt/local/bin/python I would like to get the second output with command + R. How can I do that? S.V. -- View this message in context: http://textmate.1073791.n5.nabble.com/Python-Command-R-tp29040.html Sent from the textmate users mailing list archive at Nabble.com.

11 years, 1 month

2
1
0 0

Project wide bookmarks

by Yuan Jiang

Hi: How about add the ability to navigate bookmarks across current project, and show book marks in ctrl+t dialog. -- Yuan Jiang http://blog.vetcafe.net http://twitter.com/sleetdrop

11 years, 1 month

1
0
0 0

Find dialog text boxes bug

by Igor

A friend of mine started getting some weird bug not so long ago. Within the Find dialog text boxes at some point stop rendering carets and stop responding visually to keyboard input. But every time you click the “Find” button content within those text boxes magically updates. The only way to fix this is to restart TextMate. Closing/reopening Find dialog doesn’t help. He made a video that shows this behavior https://www.dropbox.com/s/0hkhkrcqtzyi6ho/tm.search.bug.mov?dl=0 OS X 10.9 TextMate version 2.0-beta.6.8

11 years, 1 month

3
3
0 0

Problems building TextMate

by Jacob Carlborg

I'm trying to build latest TextMate in master. Previously I was able to build TextMate but not anymore. First running "./configure" results in this error: ninja: error: build.ninja:8: loading '/Users/jacob/build/TextMate/build.ninja': No such file or directory include $builddir/build.ninja ^ near here It's a minor error since it works anyway. Then when running "ninja" I get this error: $ ninja [6/1174] Generate test ‘/Users/jacob/build/TextMate/Frameworks/text/test_text.cc’… FAILED: bin/gen_test Frameworks/text/tests/t_case.cc Frameworks/text/tests/t_ctype.cc Frameworks/text/tests/t_decode.cc Frameworks/text/tests/t_encode.cc Frameworks/text/tests/t_format.cc Frameworks/text/tests/t_indent.cc Frameworks/text/tests/t_ranker.cc Frameworks/text/tests/t_split.cc Frameworks/text/tests/t_tokenize.cc Frameworks/text/tests/t_trim.cc Frameworks/text/tests/t_utf8.cc Frameworks/text/tests/t_wrap.cc > /Users/jacob/build/TextMate/Frameworks/text/test_text.cc~ && mv /Users/jacob/build/TextMate/Frameworks/text/test_text.cc~ /Users/jacob/build/TextMate/Frameworks/text/test_text.cc bin/gen_test:14:in `block (2 levels) in <main>': invalid byte sequence in US-ASCII (ArgumentError) from bin/gen_test:13:in `foreach' from bin/gen_test:13:in `each_line' from bin/gen_test:13:in `block in <main>' from bin/gen_test:8:in `each' from bin/gen_test:8:in `<main>' [6/1174] Compile ‘Shared/PCH/prelude.mm’… ninja: build stopped: subcommand failed. Adding a magic encoding comment to "bin/gen_test" does not help. -- /Jacob Carlborg

11 years, 1 month

2
3
0 0

File browser shows no files

by Julien Hugonnier

Hi: Just a quick question: I have now updated to T2 and found that whatever I do the file browser does not show any files! Has someone also encountered that problem and maybe found a solution. Reinstalling does not seem to solve it. Thanks in advance, ---Julien.

11 years, 1 month

4
3
0 0

Select no files in browser?

by Andrew Jaffe

Hi, In order to get the current version control software (e.g., svn, git) to act on the entire directory, it seems that I need to select no files or dirs in the browser. With a small number of files there, this is easy -- just click below the bottom one. However, I have many projects with lots of files, and this seems to be impossible. ("Select all" doesn't quite work, as trying "commit" in this case tries to commit all files, even those not under control of the VCS.) Surely this is trivial and I'm missing something. Andrew

11 years, 1 month

3
3
0 0

Shortcut for gutter tooltips

by Igor

I’ve installed a Rubocop bundle that lints the code and adds flags to the gutter. If you click one of such flags you get a tooltip with a description. Is there a way to trigger this tooltip without using the mouse? Screenshot: https://cloudup.com/cVwiwQigyTu Bundle: https://github.com/fazibear/Rubocop.tmbundle

11 years, 1 month

3
4
0 0

Shortcut for resetting the zoom level

by Jacob Carlborg

Is there a hotkey for resetting the zoom level? Many applications use Cmd+0 for this but in TextMate that is select last tab. -- /Jacob Carlborg

11 years, 1 month

3
3
0 0

Style formatter for TextMate?

by Andrew Pennebaker

Does anyone know of a style formatting plugin for TextMate? I'd like an automated way to configure TextMate for Google Style <https://code.google.com/p/google-styleguide/>. -- Cheers, Andrew Pennebaker

11 years, 1 month

4
3
0 0

Can't compile pdflatex; only latex

by Nick Eubank

Hi All, Long time textmate user, but at some point in the last two months I've lost the ability to compile latex in pdflatex, which causes problems when I try and run \includegraphics{something.pdf}. (I get a "Cannot determine size of graphic (No BoundingBox)" error). I've set default engine to pdflatex in preferences, but the button on the typesetting page is always "latex", and the .log file starts with: This is pdfTeX, Version 3.14159265-2.6-1.40.15 (TeX Live 2014) (preloaded format=latex 2014.5.25) 26 FEB 2015 23:38 (note the preloaded format is latex, not pdflatex). If I go to preferences > Bundles it shows the latex bundle was updated five days ago. Everything works fine if I compile in TeXShop. Suggestions?

11 years, 1 month

2
4
0 0

Is there a way to minimize JavaScript in Textmate?

by jgalt

I tried to install this bundle but the instructions seem outdated and do not match my version of Textmate (2.0-beta.6): https://github.com/subtleGradient/javascript-tools.tmbundle/tree/master

11 years, 1 month

3
3
0 0

Copying and pasting a webpage as HTML?

by jgalt

I am trying to copy the content of a FileMaker webviewer and paste it into Textmate so I can save it as an HTML file. The problem is that (OSX 10.8.5) will only let me paste from my clipboard as (simple text, or rich Text) but not as HTML. It does the same thing if I try to copy and paste from Safari, FireFox or Chrome. Is there a way to do this in OSX?

11 years, 1 month

3
3
0 0

Feature Request: Persistent Preference Window State

by bobrocke

Save the key elements of the preferences window state between uses and TextMate launches: Window location and size Pane size Active pane Selected item within a pane (where appropriate) Can anyone think of others? -- View this message in context: http://textmate.1073791.n5.nabble.com/Feature-Request-Persistent-Preference… Sent from the textmate users mailing list archive at Nabble.com.

11 years, 1 month

3
3
0 0

Re: textmate Digest, Vol 81, Issue 28

by Dustin Wheeler

Tao, You might look into the capabilities of ghostscript. It should be installed with your LaTeX install (MacTeX or equivalent), but if not, you can install it using Homebrew via brew install gs. Specifically, ghostscript should install a utility called ps2pdf that (IIRC) produces clean PDF files from an input EPS. FYI, the following MWE worked on my system using TextMate 2.0-beta6.8. Note that the order in which graphicx and epstopdf are loaded is important. \documentclass{article} \usepackage{graphicx,epstopdf} \begin{document} A sample figure: \begin{figure}[h] \centering \includegraphics[width=.9\textwidth]{Figures/sample.eps} \caption{caption} \label{fig:sample} \end{figure} \end{document} – Dustin Wheeler mskblackbelt(a)me.com On February 18, 2015 at 07:00:10, textmate-request(a)lists.macromates.com (textmate-request(a)lists.macromates.com) wrote: Question about converting eps files to pdf files on the fly. (Tao Zha)

11 years, 2 months

1
0
0 0

Question about converting eps files to pdf files on the fly.

by Tao Zha

Hi: The latest TextMate ( version 2.0-beta.6.8) no longer convert eps files to pdf files automatically when I use pdflatex. I got the error message like: ------------------------ Document Class: amsart 2009/07/02 v2.20.1 !!! Error: Writing to gs failed, signal 5 Latex Error: ./tableindustry.tex:199 Package pdftex.def Error: File `Figures/outfigpaper_prices-eps-converted-to.pdf' not found. • Including: Figures/outfigpaper_ratios2GDP-eps-converted-to.pdf ———————————— In my preamble of my Latex file, I specify \usepackage{epstopdf} The previous TextMate version works for me by automatically creating the file "outfigpaper_ratios2GDP-eps-converted-to.pdf", but the latest version gives me the above error message. Can anyone help me? Thank you very much, Tao Zha

11 years, 2 months

2
2
0 0

Code fold guides

by Spiros Philopoulos

Hi all, Are there any plans to add code fold guides to TextMate 2 (as shown here: http://darwinsantos.com/sublime_screen.png)? I know a workaround to get a similar effect is to use "Show Invisible Characters". Though the problem with this is that a lot of files written by others lack proper tab indentation. Any other workarounds to get a similar effect? Many thanks, S.P.

11 years, 2 months

6
5
0 0

Consolidation of TextMate Application Support Folders?

by bobrocke

When is it expected that TextMate 2 will untangle from TextMate 1 in the Application Support folder? Right now we have the Avian folder along with the TextMate folder and as best I can tell TextMate 2 uses some things from both folders. That's confusing and messy. Is there anyone left using TextMate 1 *and* TextMate 2? Bob -- View this message in context: http://textmate.1073791.n5.nabble.com/Consolidation-of-TextMate-Application… Sent from the textmate users mailing list archive at Nabble.com.

11 years, 2 months

4
3
0 0

Text mate 2 is unable to detect Command mistakes in Latex

by Omprokash Das

Hi there, I am having some serious problem with Textmate 2 in Mac Yosemite. I am typing my thesis in Latex. All of a sudden Textmate 2 stopped showing any error for undefined commands. Let me give you an example, lets say I need to write $\alpha$, but mistakenly I typed $\apha$ in the .tex file. When I compile it with Textmate, it does not show any error as in `Undefined Control Sequence’, it says 0 Error in the log window and just skips the part of $\apha$ in the pdf. This is a very serious problem for me as I am typing my thesis I am likely to make many such typing mistakes and if these goes undetected in the compilation then that’s a huge problem for me! Could you please tell me how to solve this problem? This thing didn’t happen before, I have been using Textmate 2 in Yosemite for around 6 moths now without any problem until today. Following are the sample codes I used to recreate the problem: \documentclass[12pt]{amsart} \usepackage{amssymb, amsmath} \date{} \begin{document} \title{Error Testing} \maketitle I want to write $\alpha$ but mistakenly if I write $\apha$ and complie it with Textmate $2$, on the log window it does not show any error as `Undefined control sequence' and on the PDF it just skips the part where it has $\apha$. $\slpha$ $\alphabeta$ \end{document} Thanks, Omprokash Das

11 years, 2 months

2
1
0 0

sudden latex tidy and latex compiling errors

by Anthony V. Pulido

Hello, I was using Textmate 2.0 beta 6.8, and suddenly, I received this error when I invoked latex tidy: Can't locate YAML/Tiny.pm in @INC (you may need to install the YAML::Tiny module) (@INC contains: /Library/Perl/5.18/darwin-thread-multi-2level /Library/Perl/5.18 /Network/Library/Perl/5.18/darwin-thread-multi-2level /Network/Library/Perl/5.18 /Library/Perl/Updates/5.18.2 /System/Library/Perl/5.18/darwin-thread-multi-2level /System/Library/Perl/5.18 /System/Library/Perl/Extras/5.18/darwin-thread-multi-2level /System/Library/Perl/Extras/5.18 .) at /usr/texbin/latexindent line 20. BEGIN failed--compilation aborted at /usr/texbin/latexindent line 20. I use tidy often, and it usually works. I am sure I used it earlier today without incident. Further, I also suddenly received the error "Command returned status code 1." for Typeset and view (PDF) when I compiled a latex file. The file uses the mtpro2 fonts, which, when disabled, allowed the file to compile again, but this is the first time this has happened. I did compile the file with the fonts enabled earlier today. Thank you for any help. Best wishes, Anthony Pulido

11 years, 2 months

4
20
0 0

Themes For "Chrome"?

by Robert J. Rockefeller

Are there plans to make TextMate’s “chrome” (file pane, tabs, etc.) theme-able? I’d like the fonts in the file pane to be smaller and the background to be darker. Bob ------------------- Robert J. Rockefeller Richmond Hill, GA www.bobrockefeller.com

11 years, 2 months

3
3
0 0

Regex For Markdown Fenced Code Blocks

by Robert J. Rockefeller

I’m new to TextMate 2 grammar definitions and am trying to add a Markdown regex to identify a Markdown fenced code block like this one: ``` Vagrant.configure("2") do |config| config.vm.box = "scotch/box" config.vm.network "private_network", ip: "192.168.33.10" config.vm.hostname = "scotchbox" config.vm.synced_folder ".", "/var/www", :mount_options => ["dmode=777", "fmode=666"] end ``` I built this regex: { name = 'markup.raw.block.markdown'; begin = '(^|\G)([`]{3})'; end = '(^|\G)(^[`]{3})'; }, Which hits the starting ``` but misses the ending one. Probably because it thinks the second one is the start of a new code block rather than the end of the last one. TextMate tangles me up some because it looks at just one line at a time for regex matches. Looked at it that way, each of the ```s is exactly the same! What would the proper regex be? Bob ------------------- Robert J. Rockefeller Richmond Hill, GA www.bobrockefeller.com

11 years, 2 months

3
7
0 0

Who/What Is Changing My Font?

by Robert J. Rockefeller

I have Panic Sans (nearly the same as Menlo) picked as my display font. Everything in the editor uses that font. Except markup.raw.block.markdown! I didn’t do it, or at least I don’t know that I did. What else in my bundles, configuration, or defaults could be doing that? Bob ------------------- Robert J. Rockefeller Richmond Hill, GA www.bobrockefeller.com

11 years, 2 months

3
13
0 0

Color Highlight?

by Robert J. Rockefeller

Is anyone aware of a TextMate 2 bundle that will color the background of a CSS color definition in the color defined like this Atom package does? https://atom.io/packages/atom-color-highlight <https://atom.io/packages/atom-color-highlight> Bob ------------------- Robert J. Rockefeller Richmond Hill, GA www.bobrockefeller.com

11 years, 2 months

5
7
0 0

Feature Request: File Revert

by Robert J. Rockefeller

I’d like a file menu command to revert a file to its previously saved state, discarding all current changes. Or is that already somewhere that I missed? Bob ------------------- Robert J. Rockefeller Richmond Hill, GA www.bobrockefeller.com

11 years, 2 months

3
2
0 0

Injecting Grammar Into Injected Grammar?

by Robert J. Rockefeller

I have a custom Markdown grammar that I inject into the official Markdown grammar with an injection selector of L:text.html.markdown and it works fine. That custom grammar defines the starting content of a markdown file between -{3} and -{3} as YAML. I have a custom YAML grammar that I inject into the official YAML grammar with an injection selector of L:source.yaml and it also works fine. That custom grammar defines runs of entity.name.value.yaml. But my custom YAML injection does not work in Markdown. I wanted my injected custom YAML to be injected into Markdown, but it’s not. I guess injecting into YAML is not picked up when YAML is injected into Markdown. :( Is that how it is expected to work? Is there another way to get injections to work on top of injections like this: Custom YAML -> YAML -> Markdown Or do I have to fork the YAML grammar? Bob ------------------- Robert J. Rockefeller Richmond Hill, GA www.bobrockefeller.com

11 years, 2 months

2
4
0 0

Exclude Top Level, But Not Nested, Folders?

by Robert J. Rockefeller

My .tm_properties file has this line: excludeDirectories = "{$excludeDirectories,assets,bin,images,logs,node_modules,cache}” and it works. Too well. Not only does it exclude projectroot/images (which is what I wanted), but it excludes projectroot/user/pages/images, too. How do I restrict excludeDirectories to only a top level folder? Bob ------------------- Robert J. Rockefeller Richmond Hill, GA www.bobrockefeller.com

11 years, 2 months

2
2
0 0

.tm_properties Won't Hide Folders?

by Robert J. Rockefeller

I have a .tm_properties file in the root of my project folder that contains these lines: excludeInFolderSearch = "{$excludeInFolderSearch,assets,bin,cache,images,logs,node_modules, config.codekit, composer.lock}" excludeInFileChooser = "{$exclude,$excludeInFolderSearch}” That doesn’t hide the folders logs, cache, etc. from the file pane. Do I have the syntax wrong? Bob ------------------- Robert J. Rockefeller Richmond Hill, GA www.bobrockefeller.com

11 years, 2 months

4
6
0 0

Segfault with synced directories

by MinRK

I have ~/Library/Application Support/TextMate synced between two computers via Dropbox (Mackup). Today, when I launched 2.0-beta 6.8 for the first time, com.macromates.TextMate.preview segfaults, and does so for every subsequent launch. Console shows this prior to the crash: TextMate[11231]: CoreData could not fulfill a fault for '0xff880002b <x-coredata://47E84A6D-2744-440D-ABA2-CE0276F6DD6C/PasteboardEntry/p16354>' When I remove Library/Application Support/TextMate/ClipboardHistory.db*, it can start again. -MinRK

11 years, 2 months

4
10
0 0

TextMate Regex vs Oyster Regex

by Bob Rockefeller

I use the app Oyster on Mac to edit and debug regexs. It works nicely, but doesn’t properly predict what TextMate will do with a regex. Something that works in Oyster, does not in TextMate. Has anyone using Mac found a regex editor that predicts TextMate? Bob ------------------- Robert J. Rockefeller Richmond Hill, GA www.bobrockefeller.com <http://www.bobrockefeller.com/>

11 years, 2 months

3
5
0 0

Regex For Markdown Lists Help

by Bob Rockefeller

I’m attempting to match the leading - characters in a Markdown list such as this: --- What were the key things that drove me to make a switch? - No Database -- you - Tremendous Support -- the - Sane Folder Structure -- everything - Rapid Development -- there - Blog Post Folders -- granted - Asset Pipeline -- Grav - Twig — yes — The regex that isn’t working looks like this: { name = 'text.html.markdown.list'; match = '(?<=\n)-(?= )|(?<!.)-(?= )'; }, What did I get wrong? Bob ------------------- Robert J. Rockefeller Richmond Hill, GA www.bobrockefeller.com <http://www.bobrockefeller.com/>

11 years, 2 months

2
1
0 0

Encrypt on Save

by Curt Sellmer

I just came across this because I have script called 'crypt'. The Avian bundle has command with a scope selector 'attr.rev-path.crypt' which seems to trigger on any file called 'crypt' and prompts me to enter a password so that the file can be encrypted. I can easily disable this, but was just curious as to why it is there in the first place.

11 years, 2 months

2
1
0 0

commands with multiple selection

by Tim Bates

Now we are in beta phase, I’ve stumbled a couple of times recently having multiple cursors and having commands fail, as this is not supported yet. Not sure if this is tricky or not to enable.. I could see it could be, if a command does things that step on what the other “copies” are trying to do. Perhaps a “multiple-selection safe” button in the snippet or command to enable cases where the author thinks it should be as straight-forward as typing into a multiple selection (like, for instance, tag completion) would get this feature off the ground? t

11 years, 2 months

5
5
0 0

conversion of bundles for 2.0

by John DeSoi

Is there any documentation of changes needed to convert 1.5 bundles to work with 2.0? I dragged the 1.5 bundle to TextMate 2 and it asks if I want to install it. Click OK and nothing seems to happen. The bundle is not installed and no errors on the screen or in the log. Thanks, John DeSoi, Ph.D.

11 years, 2 months

4
12
0 0

TextMate prompts for nonexistent update, interface has gone nutty

by Greg

Continue works on relaunch of TM here. And then I selected check on next relaunch and it went from, I think, two upgrades behind to beta 8. No problem her. On rMBP with up to date OS X. Good luck. Greg > On Feb 4, 2015, at 4:00 AM, textmate-request(a)lists.macromates.com wrote: > > Date: Tue, 3 Feb 2015 18:34:09 -0800 > From: Matt Neuburg > Subject: [TxMt] TextMate prompts for nonexistent update, interface has > gone nutty > > I am getting a dialog asking me to update TextMate, but when I check for updates, there are none: > > But that's not the worst part. I click Continue, and the interface has gone crazy: the gutter is suddenly black, and it isn't using my preferred font any more. It's as if all my preferences had been overthrown. m.

11 years, 2 months

1
0
0 0

TextMate prompts for nonexistent update, interface has gone nutty

by Matt Neuburg

I am getting a dialog asking me to update TextMate, but when I check for updates, there are none: But that's not the worst part. I click Continue, and the interface has gone crazy: the gutter is suddenly black, and it isn't using my preferred font any more. It's as if all my preferences had been overthrown. m. -- matt neuburg, phd = http://www.apeth.net/matt/ pantes anthropoi tou eidenai oregontai phusei Programming iOS 8! http://shop.oreilly.com/product/0636920034261.do iOS 7 Fundamentals! http://shop.oreilly.com/product/0636920032465.do RubyFrontier! http://www.apeth.com/RubyFrontierDocs/default.html

11 years, 2 months

4
4
0 0

Unsubscribe

by Timothy Fong

Timfong88(a)gmail.com Sent from phone On Tue, Feb 3, 2015 at 6:39 PM -0800, <textmate-request(a)lists.macromates.com> wrote: Send textmate mailing list submissions to textmate(a)lists.macromates.com To subscribe or unsubscribe via the World Wide Web, visit http://lists.macromates.com/listinfo/textmate or, via email, send a message with subject or body 'help' to textmate-request(a)lists.macromates.com You can reach the person managing the list at textmate-owner(a)lists.macromates.com When replying, please edit your Subject line so it is more specific than "Re: Contents of textmate digest..." Today's Topics: 1. TextMate prompts for nonexistent update, interface has gone nutty (Matt Neuburg) ---------------------------------------------------------------------- Message: 1 Date: Tue, 3 Feb 2015 18:34:09 -0800 From: Matt Neuburg To: TextMate users Subject: [TxMt] TextMate prompts for nonexistent update, interface has gone nutty Message-ID: <56DB986A-328A-487E-8948-E38DA272DE8D(a)tidbits.com> Content-Type: text/plain; charset="us-ascii" I am getting a dialog asking me to update TextMate, but when I check for updates, there are none: But that's not the worst part. I click Continue, and the interface has gone crazy: the gutter is suddenly black, and it isn't using my preferred font any more. It's as if all my preferences had been overthrown. m. -- matt neuburg, phd = http://www.apeth.net/matt/ pantes anthropoi tou eidenai oregontai phusei Programming iOS 8! http://shop.oreilly.com/product/0636920034261.do iOS 7 Fundamentals! http://shop.oreilly.com/product/0636920032465.do RubyFrontier! http://www.apeth.com/RubyFrontierDocs/default.html

11 years, 2 months

1
0
0 0

Question about Trim Trailing Spaces

by George Fields

Hello, I am super new to posting to lists in general, so please excuse any breach of etiquette. I love TextMate, and have been a faithful user since way back. It lacks for nothing, as far as I'm concerned, but I do have one question. Currently, I am using the Text bundle to trim trailing spaces on save. The settings are like this: Semantic Class: callback.document.will-save Save: Nothing Input: Document Format: Text Output: Replace Document Format: Text Caret Placement: Heuristic This works beautifully. The only issue I have is that no matter where I am in the document, after save my cursor (caret) is placed at the very end of the document, and the document is scrolled to that point. In a longer file, with frequent saves, I have to scroll back and find my place every time. I tried different options for Caret Placement and for Output (in the bundle), but the result remains the same. My question is twofold: is there something else I could be doing, and also I'm curious if there are any plans to change this behavior (or make trimming a built-in option, so to speak), to where the view doesn't scroll? Seems like this is a common option to want to have. Thank you! - g

11 years, 2 months

3
2
0 0

HTML enclosing typing pairs

by Jacobo Tarragón Cros

Hi, I've noticed that selecting enclosing typing pairs is broken for HTML when an open tag spans several lines. ie: <div>* <p id="paragraph" class="content"> </p> </div> If you place the caret at * and select the enclosing typing pairs, the selection closes at </p> rather than </div>. It doesn't happen however for self closing tags: <div> <input id="field" class="form-field"/> </div> I've looked into the HTML bundle but I'm not sure the typing pairs references there are the culprit for this. Could someone point me in the right direction to fix this issue? I'd be glad to open a PR once I get it working. Thanks!

11 years, 2 months

2
1
0 0

Strange behaviour: HTML output window - loading non-existing css leads to a timeout

by Hans-Jörg Bibiko

Hi, I bumped into a problem while checking the R bundle. There's a command which outputs HTML source to display the result within TM's HTML output window. If I start TM and execute this command everything will be displayed correctly. Then I close the HTML window, I modify some code, and invoke the same command again to come up with an HTML output window I only see the spinning wheel and a blank window. After ~30s the HTML window displays the correct picture. I was able to narrow down the problem and attached is a test environment (as a tmCommand). The problem is a non-existing CSS resource. If you invoke this command for the very first time, the HTML output window machinery simply ignores the non-existing CSS file and displays the content correctly. Fine. If you re-invoke the same command the HTML output keeps blank for half a minute. If you then delete the 4th "echo"-line containing R.css everything works perfectly. Here the test code #!/usr/bin/env bash [[ -f "${TM_SUPPORT_PATH}/lib/bash_init.sh" ]] && . "${TM_SUPPORT_PATH}/lib/bash_init.sh" echo "<!DOCTYPE html PUBLIC \"-//W3C//DTD HTML 4.01 Transitional//EN\">" echo "<html><head><title>R: Phonetic algorithms</title>" echo "<meta http-equiv=\"Content-Type\" content=\"text/html; charset=utf-8\">" echo "<link rel=\"stylesheet\" type=\"text/css\" href=\"R.css\">" echo "</head><body>" echo "TEST" echo "</body><html>" ****************************************************** Hans-Joerg Bibiko Max Planck Institute for Evolutionary Anthropology Department of Linguistics Deutscher Platz 6 phone: +49 (0) 341 3550 341 D-04103 Leipzig fax: +49 (0) 341 3550 333 Germany e-mail: bibiko [at] eva.mpg.de ******************************************************

11 years, 2 months

2
2
0 0

Recording of macros in current nightlies broken

by Kai Wood

I noticed something strange while trying to record a simple macro. When replaying the macro, it skips some steps, especially when there is text selected in between. Steps to reproduce: - Open a buffer with the following content: tm foo tm bar - Move to the beginning and hit "Start Recording" - Select the first word with ^w - Type "textmate" (or anything else, doesn't matter) - Hit "Stop Recording" - Move to the beginning of the line - Hit "Replay Macro" Result: On the second line, "tm" is selected, but the text has not changed. If you try to save the macro you see the content of it and will notice that the macro was at least recorded correctly. Workaround: Rolling back to the last normal release (2.0-beta.6) fixes it and replaying works again.

11 years, 2 months

2
1
0 0

"interpreter failed: No such file or directory." error

by Ross Ahmed

When I try to run run these two commands: LaTeX > Insert > Citation based on current word TODO > Insert TODO List I¹m getting a dialogue box with this message: Failure running ³Citation Based on Current Selection². interpreter failed: No such file or directory. Anyone know what the problem is? Ross Ahmed Ecologist 07875533906 Twitter: @RossAhmed <https://twitter.com/RossAhmed> LinkedIn: Ross Ahmed <https://www.linkedin.com/pub/ross-ahmed/2a/775/590>

11 years, 2 months

2
5
0 0

Weird latexmk error when compiling

by Starx

I occasionally get log output such as that I've posted below. The pdf is not updated, but both the dvi and ps file are correctly compiled. TeXShop correctly compiles using pdflatex. Occasionally latexmk will decide to use pdflatex and everything will work correctly. I don't really know what's happening with ps2pdf and what it means by "stable files" and I'm not sure if this error is caused by a bug in latexmk or maybe some error in the configuration info given to latexmk by textmate. Does the latex bundle have any control over whether latexmk uses pdflatex or regular latex? -Jim p.s. Here is that log file, with the latexmk messages: Latexmk: This is Latexmk, John Collins, 11 Nov. 2012, version: 4.35. Latexmk: applying rule 'latex'... This is pdfTeX, Version 3.1415926-2.5-1.40.14 (TeX Live 2013 Processing: Practice Midterm 1 copy.tex Document Class: exam 2011/05/22 Version 2.4 by Philip Hirschhorn Document Class: article 2007/10/19 v1.4h Standard LaTeX document class Output written on "Practice Midterm 1 copy.dvi" (6 pages, 17724 bytes). Complete transcript is in Practice Midterm 1 copy.log 0 Errors 0 Warnings in this run. Latexmk: applying rule 'dvips'... 0 Errors 0 Warnings in this run. Latexmk: applying rule 'ps2pdf'... 0 Errors 0 Warnings in this run. Latexmk: applying rule 'ps2pdf'... 0 Errors 0 Warnings in this run. Latexmk: applying rule 'ps2pdf'... 0 Errors 0 Warnings in this run. Latexmk: applying rule 'ps2pdf'... 0 Errors 0 Warnings in this run. Latexmk: applying rule 'ps2pdf'... Latexmk: Maximum runs of ps2pdf reached without getting stable files Latexmk: Did not finish processing file 'Practice Midterm 1 copy.tex': Latexmk: applying rule 'ps2pdf'... Latexmk: Errors, in force_mode: so I tried finishing targets Tell Skim to refresh '/Users/Starx/Dropbox/Mathematics/LaTeX Projects/Math307Win15/Practice Midterm 1 copy.pdf' Command latexmk -pdfps -f -r /tmp/latexmkrc -r '/Users/Starx/Library/Application Support/Avian/Bundles/latex.tmbundle/Support/config/latexmkrc' 'Practice Midterm 1 copy.tex' exited with status 12

11 years, 2 months

2
1
0 0

Re: todo bundle

by Rodney Ramcharan

Thanks Allan, the error message when I try to “Show Todo list” is: /System/Library/Frameworks/Ruby.framework/Versions/2.0/usr/lib/ruby/2.0.0/rubygems/core_ext/kernel_require.rb:55:in `require': cannot load such file -- /Users/rramcharan/Library/Application Support/TextMate/Managed/Bundles/TODO.tmbundle/Support/todo.rb (LoadError) from /System/Library/Frameworks/Ruby.framework/Versions/2.0/usr/lib/ruby/2.0.0/rubygems/core_ext/kernel_require.rb:55:in `require’ > On Jan 23, 2015, at 7:00 AM, textmate-request(a)lists.macromates.com wrote: > > Send textmate mailing list submissions to > textmate(a)lists.macromates.com > > To subscribe or unsubscribe via the World Wide Web, visit > http://lists.macromates.com/listinfo/textmate > or, via email, send a message with subject or body 'help' to > textmate-request(a)lists.macromates.com > > You can reach the person managing the list at > textmate-owner(a)lists.macromates.com > > When replying, please edit your Subject line so it is more specific > than "Re: Contents of textmate digest..." > > > Today's Topics: > > 1. todo bundle (Rodney Ramcharan) > 2. Re: todo bundle (Allan Odgaard) > > > ---------------------------------------------------------------------- > > Message: 1 > Date: Thu, 22 Jan 2015 19:19:43 -0500 > From: Rodney Ramcharan <rodney.ramcharan(a)gmail.com> > To: textmate(a)lists.macromates.com > Subject: [TxMt] todo bundle > Message-ID: <BA4D8BF9-C9DA-4FB8-8FAA-DE8466AB6E27(a)gmail.com> > Content-Type: text/plain; charset="utf-8" > > Sorry to trouble you with this since I know it?s been addressed but I can?t to figure out the answer. My todo bundle no longer works with the upgrade to yosemite, > and my path variable is defined as "$PATH:/usr/local/bin:/usr/local/bin? in the preferences tab. Is there something else I need to do. Again, many apologies for the silly question. > Best, > Rodney >

11 years, 2 months

2
1
0 0

todo bundle

by Rodney Ramcharan

Sorry to trouble you with this since I know it’s been addressed but I can’t to figure out the answer. My todo bundle no longer works with the upgrade to yosemite, and my path variable is defined as "$PATH:/usr/local/bin:/usr/local/bin” in the preferences tab. Is there something else I need to do. Again, many apologies for the silly question. Best, Rodney

11 years, 2 months

2
1
0 0

HTML Bundle: Live Preview

by Jeremy Pyne

There is a nice little Show Web Preview function. Problem is as sweet as it is when doing actual development you have to keep re-executing the shortcut to invoke it. This make seance for something like the external browsers refresh feature, but the internal preview should really be synchronized. Ie as changes are make they show in the preview immediately(or ofter a few seconds of inactivity or a save operation maybe for performance reasons.)

11 years, 3 months

2
1
0 0

Combined diff and source code highlighting

by Jacob Carlborg

Would it be possible to some how combine the diff highlighting with the highlighting of a source code? I know that it's possible to insert other grammars in a grammar but I was thinking of a general solution that doesn't require changing every existing grammar to add diff support. It would be really cool if it would be possible to recognize each file (if multiple files in a diff) and highlight it according to the file extension. -- /Jacob Carlborg

11 years, 3 months

2
4
0 0

textmate 2 - expandrive and ctl-s

by Hal Roberts

Hi All, Thanks so much for textmate. It has been my happy coding home since I switched to OSX about 8 years ago. I've been trying out textmate 2, and I really like it with the exception of two glitches that I haven't been able to figure out. The first is that I can't get cmd-t to work happily with expandrive. cmd-t seems not to find files in a given folder until I open that particular folder in the file browser sidebar. I can option-click the main folder to get it to open every folder, and this works initially, but it the files disappear from cmd-t after some period, so I have to repeat the option-click or manually browse through the file interface to open the file. I'm a keyboard guy, and I really miss just being to hit cmd-t and type in a file name to open a file. Any ideas for how to fix this? I don't mind much something a little kludgy like having to option-click the parent folder each time I sit down to a coding session, but having to do so every 20 minutes or, worse, having to manually navigate the file browser interface for files, is harshing my happy coding juju. Secondly, I retain a habit of searching using ctl-s from my previous long run with emacs. In Textmate 2, ctl-s is difficult to use because it does not wrap by default. I can just use cmd-f instead, but I mostly using the find function to navigate around source files, and I aesthetically dislike popping up the giant find and replace box just to do basic quick navigation. Is there any way to change ctl-s back to doing a wrapped search? Thanks again for a great tool! -hal -- Hal Roberts Fellow Berkman Center for Internet & Society Harvard University

11 years, 3 months

2
1
0 0

Re: LaTeX bundle wont stop opening TeXShop

by Starx

>Could you please change `refresh_viewer.scpt` by adding a `display alert` Ren, I actually did some checking along those lines before I got your message. I used a notification instead of a display alert, but the result is that the "TeXShop" block of code is definitely not being executed. Never the less, deleting the tell block from that code will still stop TeXShop from opening. I noticed you had to delete the tell block and not just the code within the tell block. Some online searching led me to the following which seems likely to be the root of the problem: http://stackoverflow.com/questions/12431811/how-to-make-applescript-not-aut… Apparently the script should be compiled so that Skim and TeXShop are not both automatically opened. I am not sure why Angelo and I seem to be the only ones having this issue. If the above is correct then this behavior should happen to everyone. -Jim

11 years, 3 months

5
13
0 0

Writing Bugs Reports Wiki Page

by Neil

The page on https://github.com/textmate/textmate/wiki/writing-bug-reports should probably include a link to where to file bugs (since it looks like Github issues are disabled on the repo).

11 years, 3 months

2
1
0 0

Keyboard shortcuts not working in non-English layouts

by Igor K

I notice this long time ago but I though that it will be fixed at some point, but looks like it won’t. Most of the shortcuts are not working when I have Russian keyboard layout active. Some of them do work though. For example ⌃W selects the word but it won’t select the next occurrence of the word. ⌃⇧K and ⌃⇧D and many others though don’t work at all. I think that everything that resides in the upper menu works with any layout, everything else works only when using English layout for me.

11 years, 3 months

2
1
0 0

Overwrite & Freehand editing modes in Textmate2

by Emmanuel Blot

Hi, I guess this question has already been answered, but I cannot find the answer, and Google does not help: How to enable these alternative edition modes in Textmate 2.0? Thanks, Manu

11 years, 3 months

3
3
0 0

Display vertical rule but also wrap text to window

by Joseph Dan

I like to use Soft Wrap. I also like to Use Window Frame as the Wrap Column. In other words, I like to wrap the text to the window. How can we, completely independent of this, display a vertical line at a given column? I can't do this with "Show Wrap Column" because it is connected to my Wrap Column setting. If I set that to 80, my Use Window Frame goes away.

11 years, 3 months

3
2
0 0

Takana support for TextMate 2?

by Joseph Dan

11 years, 3 months

1
1
0 0

How to move, order or group bundle items in a TextMate 2 Bundle?

by Graham P Heath

Hiya Everybody, I’m trying to group commands in a bundle, and to create directions for others on how to do so. Unfortunately I’ve been unable to successfully move a single bundle item. I feel like I’m very close, and I wonder if anyone could tweak these steps to make it work. Please and thanks! How to move, order or group bundle items in a TextMate 2 Bundle? ** Disclaimer: This does not work** It seems that it is a manual process of editing a info.plist, using uuidgen on you script to generate the correct uuid for the info.plist. http://textmate.1073791.n5.nabble.com/Submenus-in-bundles-and-the-info-plis… But others indicate this is less than successful. http://superuser.com/questions/405782/is-it-possible-to-rearrange-commands-… This is what is suggested by all the research I could find (Linked below). I'm leaving it here in hopes that someone can more easily find the missing piece and improve it. I've even sent a copy along to the TextMate Mailing List to see if they can find the flaws. First back up your bundle. Then using XCode's plist editor, open your bundle's info.plist. Creat this structure if you dont already have it. 1. Right click -> Add Row -> "mainMenu". 2. Change "mainMenu"'s type to Dictionary. 3. Create nested items "submenus", "items", and "excludedItems", changing "submenus" and "excludedItems" to "Dictionary" and "items" to Array as you go 4. Open Terminal.app and run the command `uuidgen` 5. Copy the output. (from now on called [UUID#1]) 6. Create a new item under "submenus", naming it by pasting [UUID#1] 7. Change [UUID#1]'s type to Dictionary. 8. Add a child to [UUID#1] named "name", set its value to "Network Scripts" (or whatever) 9. Add a child to [UUID#1] named "items", set its type to Array 10. Add items using the (+) button, each item is a UUID from your commands. To get this UUID, open the command's file in TextMate. If you try to Open the .tmCommand file directly TextMate will complain, "The bundle item [Bundle Item]; is already installed". a) You can simply open the Commands folder, and textmate won't mind opening the files from the file drawer. or b) or `mate ~/Library/Application Support/Avian/Bundles/[Your Bundle]/Commands/[Your Command]. 11. When the file is open find these lines. You're string will be different but formatted the same. <key>uuid</key> <string>8E9BA0D3-E282-4516-8565-E920EA98C898</string> This is the UUID for your command. Now known as [UUID#2] 12. Go back to the info.plist, in step 9 you created a "items" array, add [UUID#2] to the array. 13. Add [UUID#2] to a “ordering" (type Array) object on the root of the xml. 14. Repeat 10 - 13 to add multiple items. 15. Save. Graham P Heath

11 years, 3 months

2
2
0 0

mystery of the open tabs

by Matt Neuburg

Can anyone explain why some of my project folders open empty and others open with the previously open tabs open in them? The inconsistency is puzzling. The folders themselves are consistent with themselves, just not with each other. :) m. -- matt neuburg, phd = http://www.apeth.net/matt/ pantes anthropoi tou eidenai oregontai phusei Programming iOS 8! http://shop.oreilly.com/product/0636920034261.do iOS 7 Fundamentals! http://shop.oreilly.com/product/0636920032465.do RubyFrontier! http://www.apeth.com/RubyFrontierDocs/default.html

11 years, 3 months

3
9
0 0

TextMate grammars and nested multiline comments

by Jens Axel Søgaard

Hi All, While writing a grammar for programs written in the Racket language, I have stumbled upon a problem. In Racket #| starts a multiline comment and |# ends it. The problem is that multiline comments can be nested: #| a comment #| still a comment |# even more comment |# Here is my non-working attempt: repository: multilinecomment: begin: \#\| end: \|\# name: comment contentName: comment patterns: - include: "#multilinecomment" name: comment - match: ([^\|]|\|(?=[^#]))* name: comment The intent of the match patterns are: "#multilinecomment" A multiline comment can contain another multiline comment. ([^\|]|\|(?=[^#]))* The meaning of the subexpressions: [^\|] any characters not an `|` \|(?=[^#]) an `|` followed by a non-`#` The entire expression thus matches a string not containg |# Is it possible to match nested multiline comments correctly? -- Jens Axel Søgaard

11 years, 3 months

2
2
0 0

Re: LaTeX bundle wont stop opening TeXShop

by Starx

Sorry for the delayed response. I use Typeset & View so the changes I made to latex_watch.pl must then be irrelevant. Fyi, I never thought there was ever a problem with the refresh_viewer script. I always thought that the problem was that the script was being called from elsewhere with the wrong viewer supplied as a parameter. I could not track down where it's called from (I know very little about bundles) so my workaround was to just rewrite the script to open Skim regardless of what viewer it's given as a parameter. I mentioned this only because it pinpoints the code that is opening TeXShop, and hence might have been helpful information for debugging the issue, though that may now be unnecessary: As suggested I reset to defaults and then installed the LaTeX bundle again. The Bundles -> LaTeX -> Preferences... command stopped functioning but TeXShop no longer opens when type setting. After several restarts the Preferences command has resumed functioning and the TeXShop issue remains fixed. This means that currently all my issues have been resolved. Thanks! -Jim

11 years, 3 months

3
6
0 0

Re: Strava file conversion

by Greg

> On Jan 7, 2015, at 3:22 AM, textmate-request(a)lists.macromates.com wrote: > Date: Wed, 7 Jan 2015 09:21:10 +0100 > From: Carsten Hoever <hoever(a)gmx.de <mailto:hoever@gmx.de>> > >> This is a from a file from Strava generated on an iPhone. >> >> Is there a way to convert it to gpx? > > I don't think you will get any useful answers here, as this is not a Textmate specific problem. But since I am at it: have you considered simply exporting the activity from Strava as GPX? There are even automatic services for doing that (tapiriik) if you don't want to do it manually. In case you have more questions I suggest you reply to my e-mail address and not the TxMt list. > > Regards, > > Carsten Oops, senior moment. Wrong group. But thank you for the suggestions, I’ll look at tapriniik. I guess my search was too narrow. I didn’t see how to export from Strava. I thought it should do it, but wasn’t seeing it. Will look harder. I just got the paid membership to see how it handled heart rate data, although have had a little used free account for some time. Greg

11 years, 3 months

1
0
0 0

2026

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

TextMate